J-STD-001 Soldering Standard Exam – IPC Certification – Exam Questions with Correct Answers

J-STD -001 Soldering Standard Exam
– IPC
Certification– Exam Questions with Correct Answers
Who is responsible for identifying the assembly class?
- CORRECT ANSWER -User

What is a defect?
- CORRECT ANSWER -A condition that may affect the form, fit, or function of the
item in the end use environment

Hardware found to not conform to the requirements of the standard shall be classified as defects and
dispositioned for:- CORRECT ANSWER -[D1D2D3]

There shall be no broken strands for wires used at a potential of 6kV or greater:
- CORRECT ANSWER -
[D1D2D3]

A documented process control system shall be implemented
- CORRECT
for: ANSWER -[N1N2D3]

The contract shall take precedence over this standard- CORRECT
for: ANSWER -[D1D2D3]

What is wire overlap?
- CORRECT ANSWER -When a wire is wrapped more than 360 and crosses over
itself

What is wire over wrap?
- CORRECT ANSWER -When a wire is wrapped more than 360 and remains in
contact with the terminal

Manufacturers shall perform 100% inspection unless sampling inspection is defined
- CORRECT
for:
ANSWER-[N1D2D3]

Inspection of soldering and cleanliness shall be performed prior to conformal coasting, staking, or
encapsulation for:
- CORRECT ANSWER -[N1D2D3]

Illumination at the surface of work stations should be at least -what?
CORRECT ANSWER -1000 lux

What is the tolerance for magnification aids?
- CORRECT ANSWER -+- 15%

Eating, drinking, smoking, -cigs
e use shall be prohibited at the work station- for:
CORRECT
ANSWER-[D1D2D3]

Manufacturer shall verify ESD is adequate when humidity falls below 30%
- CORRECT
for: ANSWER -
[N1D2D3]

Manufacturer shall establish an ESD control program -for:
CORRECT ANSWER -[D1D2D3]

, What is J-STD -002?- CORRECT ANSWER -Solder-ability tests for Component leads, terminations,
lugs, wires, and terminals

What is J-STD -003?- CORRECT ANSWER -Solder ability tests for printed boards

What is J-STD -004?- CORRECT ANSWER -Requirements for Soldering Fluxes

What is J-STD -005?- CORRECT ANSWER -Requirements for Soldering Paste

What is J-STD -006?- CORRECT ANSWER -Requirements for electronic grade solder alloys, fluxed and
non-fluxed solid solders

Manufacturers shall have a -free
Pb control plan for:
- CORRECT ANSWER -[N1N2D3]

Items exposed to uncured silicone material shall not be used for processing other material
- for:
CORRECT ANSWER -[D1D2D3]

Solder alloys shall be in accordance with
-STD
J -006 or equivalent for:
- CORRECT ANSWER -
[D1D2D3]

Solder paste shall be in accordance with
-STDJ -005 or equivalent for:
- CORRECT ANSWER -
[D1D2D3]

Pb-free processing shall be in accordance with a documental procedure
- CORRECT
for: ANSWER -
[N1D2D3]

SnPb solder alloys other than ... shall be in compliance- for:
CORRECT ANSWER -[N1D2D3]

Dross shall be removed from the solder surface without contacting tinned or soldered items
- for:
CORRECT ANSWER -[N1D2D3]

Type H or M fluxes shall not be used for tinning of stranded wires
- CORRECT
for: ANSWER -
[D1D2D3]

Flux shall be in accordance with
-STD
J -004 or equivalent for:
- CORRECT ANSWER -[D1D2D3]

Adhesives shall not be detrimental and shall be cured- CORRECT
for: ANSWER -[D1D2D3]

Component coating meniscus shall not be trimmed -for:
CORRECT ANSWER -[N1D2D3]

A tool used to cut leads shall not impart shock that damages something
- CORRECT
for: ANSWER -
[D1D2D3]