WFSM - Set A (Volume 2) Exam
UPDATED QUESTIONS AND CORRECT
ANSWERS
1. In which storage area would you find routinely used, high-use materials, such as polyvinyl
chloride (pvc) pipe, glue, cleaner, and nails?
a. residue holding area.
b. holding area.
c. shop stock.
d. bench stock. - CORRECT ANSWER d. bench stock
2. What happens when an individual planning a job orders the incorrect material by mistake?
a. civil engineering (ce) must accept the material, even if it cannot be used for that job.
b. incorrect materials that are actually delivered are returned at the senders expense.
c. the individual who ordered the incorrect materials is entered into training.
d. the individual who planned the job pays for the incorrect material. - CORRECT
ANSWER a. civil engineering (ce) must accept the material, even if it cannot be used
for that job.
3. What type of work is not part of preventive maintenance (pm)?
a. utilities operations.
b. utilities maintenance.
c. facility maintenance.
d. equipment maintenance. - CORRECT ANSWER a. utilities operations.
4. Which plan shows a top view of the building as if the top was cut off (cross-sectional)?
a. mechanical
b. foundation
c. elevation plan.
, d. floor plan - CORRECT ANSWER d. floor plan.
5. What do you do to a base utility map any time you make a change in a utility system?
a. discard the old prints
b. never modify original prints
c. have all original prints cleared through engineering.
d. note changes on prints and notify engineering. - CORRECT ANSWER d. note
changes on prints and notify engineering.
6. What three views are used in working sketches?
a. isometric, back and side
b. top, side, and isometric
c. front, back and side.
d. back, top and front - CORRECT ANSWER b. top, side and isometric
7. What written documents explain points that are not readily explained by drawings?
a. base utilities maps
b. working sketches
c. Bill of materials (bom)
d. specifications - CORRECT ANSWER d. specifications
8. What formula is used to calculate chemical feed rate in pounds per day?
a. perimeter.
b. volume.
c. dosing.
d. area. - CORRECT ANSWER c. dosing
9. What is defined as the vertical distance from the surface of water to the point of use?
a. head
UPDATED QUESTIONS AND CORRECT
ANSWERS
1. In which storage area would you find routinely used, high-use materials, such as polyvinyl
chloride (pvc) pipe, glue, cleaner, and nails?
a. residue holding area.
b. holding area.
c. shop stock.
d. bench stock. - CORRECT ANSWER d. bench stock
2. What happens when an individual planning a job orders the incorrect material by mistake?
a. civil engineering (ce) must accept the material, even if it cannot be used for that job.
b. incorrect materials that are actually delivered are returned at the senders expense.
c. the individual who ordered the incorrect materials is entered into training.
d. the individual who planned the job pays for the incorrect material. - CORRECT
ANSWER a. civil engineering (ce) must accept the material, even if it cannot be used
for that job.
3. What type of work is not part of preventive maintenance (pm)?
a. utilities operations.
b. utilities maintenance.
c. facility maintenance.
d. equipment maintenance. - CORRECT ANSWER a. utilities operations.
4. Which plan shows a top view of the building as if the top was cut off (cross-sectional)?
a. mechanical
b. foundation
c. elevation plan.
, d. floor plan - CORRECT ANSWER d. floor plan.
5. What do you do to a base utility map any time you make a change in a utility system?
a. discard the old prints
b. never modify original prints
c. have all original prints cleared through engineering.
d. note changes on prints and notify engineering. - CORRECT ANSWER d. note
changes on prints and notify engineering.
6. What three views are used in working sketches?
a. isometric, back and side
b. top, side, and isometric
c. front, back and side.
d. back, top and front - CORRECT ANSWER b. top, side and isometric
7. What written documents explain points that are not readily explained by drawings?
a. base utilities maps
b. working sketches
c. Bill of materials (bom)
d. specifications - CORRECT ANSWER d. specifications
8. What formula is used to calculate chemical feed rate in pounds per day?
a. perimeter.
b. volume.
c. dosing.
d. area. - CORRECT ANSWER c. dosing
9. What is defined as the vertical distance from the surface of water to the point of use?
a. head
