TKA 2.0 EXAM
If the user improperly collects the _____CT landmark, the _____ may be computed in
an unreliable location. - answer Medial malleolus, default tibia proximal medial
'Resection Landmark'
In the image shown, which warning is displayed on the main window?
(Circle on the femur notch) - answer Flange tip
Consider the following scenario and included image. The user is capturing the tibia
patient landmarks and the following error pops up. What could be a reason? -
answerThe captured points are not passing the CT ankle width vs patient landmark
ankle width quality check
The femoral resection landmarks are defined by the hip center, femur knee center,
medial epicondyle and lateral epicondyle. (if it has distal and superior shaft then it is
false) - answerTrue
The Medial Proximal Tibial Angle (MPTA) value is calculated using tibial 'Constitutional
Landmarks', determined by the patch landmark methodology. - answerTrue
Consider the following scenario and included image. The user is capturing 'Hip Center',
the following error will pop up if __________. - answerThe spread metric used to
calculate 'Hip Center' fails more than once
Within 'Mako Case Information' the user can reference the computer generated
'constitutional alignment' value. It will be denoted as _____. - answeraHKA
If the 'checkpoint near cut' warning is NOT triggered on the femur the checkpoint will be
displayed as what color on the main window of the 'Implant Planning' page? -
answerWhite
If the surgeon chooses to utilize intra-incisional tibia pins, the surgeon must
__________ prior to stem drill / keel punch. - answerremove the tibial clamp, array and
pins
Regarding intra-incisional tibia bone pin placement, the 2-pin clamp bolt should be
placed facing __________ with __________. - answerLaterally, no adapter
In the image shown, which warning is displayed on the main window?
(YELLOW Surounding the tibia cut) - answerImplant proud of cut
, For tibia intra-incisional pins, the surgeon can utilize the long or short stabilizers.
However, if using the long stabilizer, 140 mm pins are recommended and when using
the short stabilizer, 110 mm pins are recommended. - answerTrue
Consider the following scenario the femoral component placement has triggered the
'True notching' warning. Which of the following options is NOT a potential solution? -
answerReduce the flexion of the femoral component
What button must the user press to save force data within the force table? -
answerEnter
The user cannot capture 'Tensioning' poses while the tilt icon is visible on the screen. -
answerFalse
Based on the surgeon's clinical assessment, he/she would like to proceed with a 'Mid-
resection' case. - answerClick on the button that will enable the appropriate Joint
Assessment page.
'Potential notch' can be described as the superior edge of anterior cut haptic model
violating bone surface. - answerFalse
Which feature, when enabled allows the surgeon to intra-operatively balance based on
pose captures? - answerLaxity view
Based on the image below, which planning notifications have been triggered within
'Surgeon preferences'? - answerFemur planning, tibia planning
If the femoral component is overhanging the magenta line, a warning will be triggered -
answerFalse
Consider the following scenario and included image. The user is capturing 'Hip Center'
and the following warning pops up. The software does not capture the 'Hip Center' and
prompts the user to repeat 'Hip Center'.( 6.7 Hip center reading) - answerFalse
The user may need to 'zero' during trialing for the following reasons:
If the femur is articulating in the sulcus of the tibia and anything other than zero is
displayed - answerAll mentioned answer choices
The user may need to 'zero' during trialing for the following reasons:
If the femur is articulating in the sulcus of the tibia and anything other than zero is
displayed - answerAll mentioned anser choices
The 'femur planning' notification will alert the user if: - answerMedial or lateral distal
resections exceed the preferred range
If the user improperly collects the _____CT landmark, the _____ may be computed in
an unreliable location. - answer Medial malleolus, default tibia proximal medial
'Resection Landmark'
In the image shown, which warning is displayed on the main window?
(Circle on the femur notch) - answer Flange tip
Consider the following scenario and included image. The user is capturing the tibia
patient landmarks and the following error pops up. What could be a reason? -
answerThe captured points are not passing the CT ankle width vs patient landmark
ankle width quality check
The femoral resection landmarks are defined by the hip center, femur knee center,
medial epicondyle and lateral epicondyle. (if it has distal and superior shaft then it is
false) - answerTrue
The Medial Proximal Tibial Angle (MPTA) value is calculated using tibial 'Constitutional
Landmarks', determined by the patch landmark methodology. - answerTrue
Consider the following scenario and included image. The user is capturing 'Hip Center',
the following error will pop up if __________. - answerThe spread metric used to
calculate 'Hip Center' fails more than once
Within 'Mako Case Information' the user can reference the computer generated
'constitutional alignment' value. It will be denoted as _____. - answeraHKA
If the 'checkpoint near cut' warning is NOT triggered on the femur the checkpoint will be
displayed as what color on the main window of the 'Implant Planning' page? -
answerWhite
If the surgeon chooses to utilize intra-incisional tibia pins, the surgeon must
__________ prior to stem drill / keel punch. - answerremove the tibial clamp, array and
pins
Regarding intra-incisional tibia bone pin placement, the 2-pin clamp bolt should be
placed facing __________ with __________. - answerLaterally, no adapter
In the image shown, which warning is displayed on the main window?
(YELLOW Surounding the tibia cut) - answerImplant proud of cut
, For tibia intra-incisional pins, the surgeon can utilize the long or short stabilizers.
However, if using the long stabilizer, 140 mm pins are recommended and when using
the short stabilizer, 110 mm pins are recommended. - answerTrue
Consider the following scenario the femoral component placement has triggered the
'True notching' warning. Which of the following options is NOT a potential solution? -
answerReduce the flexion of the femoral component
What button must the user press to save force data within the force table? -
answerEnter
The user cannot capture 'Tensioning' poses while the tilt icon is visible on the screen. -
answerFalse
Based on the surgeon's clinical assessment, he/she would like to proceed with a 'Mid-
resection' case. - answerClick on the button that will enable the appropriate Joint
Assessment page.
'Potential notch' can be described as the superior edge of anterior cut haptic model
violating bone surface. - answerFalse
Which feature, when enabled allows the surgeon to intra-operatively balance based on
pose captures? - answerLaxity view
Based on the image below, which planning notifications have been triggered within
'Surgeon preferences'? - answerFemur planning, tibia planning
If the femoral component is overhanging the magenta line, a warning will be triggered -
answerFalse
Consider the following scenario and included image. The user is capturing 'Hip Center'
and the following warning pops up. The software does not capture the 'Hip Center' and
prompts the user to repeat 'Hip Center'.( 6.7 Hip center reading) - answerFalse
The user may need to 'zero' during trialing for the following reasons:
If the femur is articulating in the sulcus of the tibia and anything other than zero is
displayed - answerAll mentioned answer choices
The user may need to 'zero' during trialing for the following reasons:
If the femur is articulating in the sulcus of the tibia and anything other than zero is
displayed - answerAll mentioned anser choices
The 'femur planning' notification will alert the user if: - answerMedial or lateral distal
resections exceed the preferred range
