FEX Seattle Study Guide Most Recent Exam 2026
Actual Complete Real Verified Exam Questions And
Verified Answers | 100% Correct Answers | Already
Graded A+ | Guaranteed Success!! Newest Exam!!!
What type of test is necessary on a Co2 hose before
installation? - Answer-Conductivity
What is the maximum travel distance for a Class B fire
extinguisher? (Light hazard, Ordinary Hazard, Extra
Hazard) - Answer-50', 50', 50'
Administrative Rating 9.01.04 states that ________ are to
be followed. - Answer-Nationally recognized standards
A 10 Ft sq. heptane tank should have a ______ rated
extinguisher protecting it. - Answer-20BC
An aluminum shell extinguisher that was in a room that
had a fire should be what? - Answer-Destroyed
A Co2 should be hydrotested to what stamped operating
pressure? - Answer-5/3
,2|Page
A cartridge less than 2 in. in diameter and 2 ft. in length
__________? - Answer-Does not require hydrotesting
What is the identification mark for a class B fire
extinguisher? - Answer-Red square
What room temperature is used for a ratings test on fire
extinguishers? - Answer-70
What does an inspection of a fire extinguisher consist of? -
Answer-Quick check
What is not looked at during a quick check? - Answer-
Agent
Maintenance shall be done how often? - Answer-Yearly
Maintenance does not include a thorough examination of
which part of an extinguisher? - Answer-Extinguishing
agent
, 3|Page
Any stainless steel subjected to ______________ should
be __________ - Answer-Calcium Chloride, destroyed
Labeling of test procedure started in
_________________? - Answer-January 1986
An extinguisher with a weight no exceeding 40 lbs. shall
be mounted how high? - Answer-No higher than 5 ft
An extinguisher with a weight in excess of 40 lbs. shall be
mounted how high? - Answer-No higher than 3 1/2 inches
What is not a disadvantage of dry chemical extinguishers?
- Answer-Low rating
What rating does two 2 1/2 gallon water extinguishers
have? - Answer-2A
Fire equipment maintenance if the responsibility of whom?
- Answer-Tenant and owner