CSX FREIGHT CONDUCTOR FINAL EXAM
QUESTIONS AND ANSWERS WITH COMPLETE
SOLUTIONS VERIFIED GRADED A+
Save
Practice questions for this set
Learn 1 /7 Study with Learn
Report it to the proper authority
Choose an answer
If you encounter a lock that is
What hand signal is raised and defective or missing and a
1 2
lowered vertically? replacement is not immediately
available, What must you do?
Your train is traveling at a speed of
Who is responsible for protecting a 42 miles per hour with a speed limit
3 4
shove move? of 40 mph. This means you are
speeding by 2 mph. what do you do?
, Don't know?
Terms in this set (168)
What hand signal is raised and Proceed
lowered vertically?
What form is required to move a key CT-168
train to show the hazmat position in a
track?
True or False: When handling one or True
more clearance implicated
shipments in a train, do not enter a
yard or terminal where a yardmaster
is on-duty until the yardmaster is
informed of the shipment.
What instructions are required to Clearance Bureau Instructions
handle and move a clearance
implicated shipment?
Your train is traveling at a speed of Tell the locomotive operator to slow down
42 miles per hour with a speed limit
of 40 mph. This means you are
speeding by 2 mph. what do you do?
Your train is traveling at a speed of Tell the locomotive operator to stop
47 MPH with a speed limit of 40. This
means you are speeding by 7 MPH.
what do you do?
, Your equipment must not foul a track 1) The intended route is clear
until it can be visually determined 2) Switches and derails connected with the
that: 2 Answers movement are properly lined
The yardmaster tasked you with 1) Standing outside the rail and off the end of
putting cars from track 11 into track 4. crosstie extend arm toward the equipment
Track 4 does not have a clearance 2) Identify the location equipment can no longer
marker clearly visible. How would be touched and position equipment an additional
you find the clearance point? 2 50 ft into track from location identified
Answers
Multiple Part True or False: 1) False
After operating a switch or derail the 2) False
employee must make certain the 3) True
1) Device has a reflective handle 4) True
2) Device is lined opposite
movement
3) Lever is latched
4) If equipped, device is locked
before being left unattended
When shoving equipment you must 1) A Fixed Derail
stop 150 ft before what? Select All 2) An improperly lined switch
That Apply
You are operating on the q79510 at Operate the Train not to exceed 20 MPH for 1 train
max speed in CP territory and you length
experience an air brake emergency
what is required when permitted to
proceed?
QUESTIONS AND ANSWERS WITH COMPLETE
SOLUTIONS VERIFIED GRADED A+
Save
Practice questions for this set
Learn 1 /7 Study with Learn
Report it to the proper authority
Choose an answer
If you encounter a lock that is
What hand signal is raised and defective or missing and a
1 2
lowered vertically? replacement is not immediately
available, What must you do?
Your train is traveling at a speed of
Who is responsible for protecting a 42 miles per hour with a speed limit
3 4
shove move? of 40 mph. This means you are
speeding by 2 mph. what do you do?
, Don't know?
Terms in this set (168)
What hand signal is raised and Proceed
lowered vertically?
What form is required to move a key CT-168
train to show the hazmat position in a
track?
True or False: When handling one or True
more clearance implicated
shipments in a train, do not enter a
yard or terminal where a yardmaster
is on-duty until the yardmaster is
informed of the shipment.
What instructions are required to Clearance Bureau Instructions
handle and move a clearance
implicated shipment?
Your train is traveling at a speed of Tell the locomotive operator to slow down
42 miles per hour with a speed limit
of 40 mph. This means you are
speeding by 2 mph. what do you do?
Your train is traveling at a speed of Tell the locomotive operator to stop
47 MPH with a speed limit of 40. This
means you are speeding by 7 MPH.
what do you do?
, Your equipment must not foul a track 1) The intended route is clear
until it can be visually determined 2) Switches and derails connected with the
that: 2 Answers movement are properly lined
The yardmaster tasked you with 1) Standing outside the rail and off the end of
putting cars from track 11 into track 4. crosstie extend arm toward the equipment
Track 4 does not have a clearance 2) Identify the location equipment can no longer
marker clearly visible. How would be touched and position equipment an additional
you find the clearance point? 2 50 ft into track from location identified
Answers
Multiple Part True or False: 1) False
After operating a switch or derail the 2) False
employee must make certain the 3) True
1) Device has a reflective handle 4) True
2) Device is lined opposite
movement
3) Lever is latched
4) If equipped, device is locked
before being left unattended
When shoving equipment you must 1) A Fixed Derail
stop 150 ft before what? Select All 2) An improperly lined switch
That Apply
You are operating on the q79510 at Operate the Train not to exceed 20 MPH for 1 train
max speed in CP territory and you length
experience an air brake emergency
what is required when permitted to
proceed?
