ANSWERS(RATED A+)
mutual inductance - ANSWERPrinciples of one coil inducing voltage into the other coil
Primary - ANSWERThe side connected to the source
Secondary - ANSWERThe side connected to the load
Copper losses - ANSWERPower loss due to the resistance of the wire
Eddy currents - ANSWERPower loss due to the currents flowing within the core
Hysteresis - ANSWERPower loss due to the constant aligning and realigning of the
molecules
Flux leakage - ANSWERPower loss due to coupling
KVA (Kilovolt-amperes) - ANSWERTransformer capacity is rated in
ANSI (American National Standards Institute) - ANSWERInstitute that developed
standard for labeling polarity markings
H - ANSWERIn relation to polarity, high voltage is marked with
X - ANSWERIn relation to polarity, low voltage is marked with
Every - ANSWEROvercurrent protection is required to be a part of ___________ circuit.
Fuses or circuit breakers - ANSWEROvercurrent protection is provided by either
___________ or ____________
Short circuit or overload - ANSWERAn overcurrent can be either a(n) _________ or
a(n) _________
Readily accessible - ANSWERA fuse is an electrical safety valve and should always be
AIC (amperes interrupting capacity) - ANSWERWhen replacing a fuse, the voltage,
ampere ratings, and _________ must all be the same
Ground - ANSWERGFCIs will de-energize a circuit when current to _________ exceeds
4 to 6 mA.
True - ANSWERGFCIs are required in post offices. True or False