TFM 12 Fire Alarm Technical Most Recent Exam Actual
Complete Real Exam Questions And Correct Answers (Verified
Answers) | Already Graded A+ | Guaranteed Success!! Newest
Why 'type' shall plenum cable be? What substitutions are allowed?
Power Limited Fire Alarm Plenum (F.P.L.P) C.M.P can be substituted.
Why 'type' shall riser cable be? What substitutions are allowed?
Power Limited Fire Alarm Riser (F.P.L.R) C.M.P, F.P.L.P.
C.M.R can be substituted.
What 'type' shall general purpose wire be? What substitutions are
permitted?
Power Limited Fire Alarm (F.P.L) C.M.P, F.P.L.P, C.M.R, F.P.L.R, C.M.G
CM can be substituted (all types)
What is the maximum voltage permitted through multi-conductor
N.P.F.L.A cables?
150 volts
,What is the voltage rating marked on P.F.L.A cables?
Not less than 300 volts
Shall the voltage rating marked on P.F.L.A cables?
No, because they may be mistakenly used for electrical applications.
What is 'Rate Compensation Detector'?
A device that responds when a temperature rises at an exceeding rate that
is predetermined.
What is a 'Smoke Detector'?
a device that detects both visible and invisible combustion particles?
Which detector is best a detecting invisible particles?
Ionization
Which sensor is better at detecting thick, visible smoke particles?
Photoelectric
, What is a SPOT TYPE sensor?
a device in which detecting an element is concentrated at a particular
location.
What is a DIGITAL ALARM COMMUNICATOR TRANSMITTER ( D.A.C.T)?
A system component at the protected premises is connected to the
detection devices. It has a line seizure and can connect to a D.A.C.R.
What is a DIGITAL ALARM COMMUNICATOR RECEIVER? (D.A.C.R)?
A system component that accepts and displays signals sent over the
public phone network from a D.A.C.T (i.e A.D.T monitoring center)
What is an alarm signal?
A signal indicating an emergency that requires immediate action.
What is a Supervisory signal?
A signal that indicates the need for action in connection with the
SUPERVISION of fire equipment.
What is a Trouble signal?
A signal that indicates a fault with the fire equipment. It must have an
audible signal, distinctive from alarm signals.
Complete Real Exam Questions And Correct Answers (Verified
Answers) | Already Graded A+ | Guaranteed Success!! Newest
Why 'type' shall plenum cable be? What substitutions are allowed?
Power Limited Fire Alarm Plenum (F.P.L.P) C.M.P can be substituted.
Why 'type' shall riser cable be? What substitutions are allowed?
Power Limited Fire Alarm Riser (F.P.L.R) C.M.P, F.P.L.P.
C.M.R can be substituted.
What 'type' shall general purpose wire be? What substitutions are
permitted?
Power Limited Fire Alarm (F.P.L) C.M.P, F.P.L.P, C.M.R, F.P.L.R, C.M.G
CM can be substituted (all types)
What is the maximum voltage permitted through multi-conductor
N.P.F.L.A cables?
150 volts
,What is the voltage rating marked on P.F.L.A cables?
Not less than 300 volts
Shall the voltage rating marked on P.F.L.A cables?
No, because they may be mistakenly used for electrical applications.
What is 'Rate Compensation Detector'?
A device that responds when a temperature rises at an exceeding rate that
is predetermined.
What is a 'Smoke Detector'?
a device that detects both visible and invisible combustion particles?
Which detector is best a detecting invisible particles?
Ionization
Which sensor is better at detecting thick, visible smoke particles?
Photoelectric
, What is a SPOT TYPE sensor?
a device in which detecting an element is concentrated at a particular
location.
What is a DIGITAL ALARM COMMUNICATOR TRANSMITTER ( D.A.C.T)?
A system component at the protected premises is connected to the
detection devices. It has a line seizure and can connect to a D.A.C.R.
What is a DIGITAL ALARM COMMUNICATOR RECEIVER? (D.A.C.R)?
A system component that accepts and displays signals sent over the
public phone network from a D.A.C.T (i.e A.D.T monitoring center)
What is an alarm signal?
A signal indicating an emergency that requires immediate action.
What is a Supervisory signal?
A signal that indicates the need for action in connection with the
SUPERVISION of fire equipment.
What is a Trouble signal?
A signal that indicates a fault with the fire equipment. It must have an
audible signal, distinctive from alarm signals.
