Repair and Reinstallation Exam
Save
Practice questions for this set
Learn 1 /7 Study using Learn
,What tool should be used to White rubber mallet
pound down the metal lip of
clamp-down transition strip
(door bar)?
When sealing a seam, a bead of 1. Primary backing
adhesive is applied to the 2. Secondary backing
carpet edge to adhere what
two things?
When sealing seams, to evenly their thumb and finger
distribute a latex or acrylic
sealer on a carpet's cut edge,
what should technicians use?
,When seaming or sectioning a on all stretch-in carpet
carpet, technicians should seal
each cut edge with acrylic, latex
or thermoplastic adhesive on
what styles of carpet?
What is the recommended seam A smooth or paddle roller
groomer to use immediately
following hot-melt seaming?
When using a knee kicker and angled towards the wall then upwards
carpet awl to lift carpet off tack
strip (gripper), the direction of
lift should be what?
, To prevent delamination while A knee kicker working around the entire
disengaging wet carpet from perimeter
tack strip (gripper), technicians
should use what?
Chalk used in chalk line tools White
should be what color?
When cutting carpet for Pile yarns
seaming or sectioning, normally
technicians should be careful
not cut what?