TRAFFIC SUPERVISOR EXAM PREP ACTUAL
QUESTIONS AND ANSWERS - LATEST AND
COMPLETE UPDATE WITH VERIFIED
SOLUTIONS – ASSURED PASS WITH INSTANT
DOWNLOAD PDF.
How far behind guard rail is it preferred that class A supports be located - -
ANSWER: 2 feet or 1 foot minimum
What class of sign supports shall be required at unprotected locations on ODOT s
roadway system. - -ANSWER: Class A
All class A and B supports shall be MASH or 350 compliant if used before what
date - -ANSWER: 12/31/2024
Class B supports can only be use where - -ANSWER: Within clear zone where
protected from traffic and outside the clear zone.
What is the minimum height for sign that are up less than 3 days - -ANSWER: 1
foot from roadway to bottom of sign
,What is the minimum clear distance for class A supports for signs larger that 6 x 9
- -ANSWER: 7 feet
What size must the bolts be that hold class a supports to the stubs -
-ANSWER: inch
Booster post shall be the same or _______________less than stub post
- -ANSWER: 1 pound less
When booster post is less it can be mounted where compared to the stub post. - -
ANSWER: In front
If booster post and stub post are the same Weight than the booster post must be
mounted where. - -ANSWER: On the back of the stub post.
Stub post must be limited to what height above ground when using aluminum bolts
- -ANSWER: 4 inches
How far apart are the bolts to be center to center on class A supports -
-ANSWER: 4 inches
,Which way must the hole be drill in comparison to the roadway - -ANSWER:
Perpendicular
What is the height above dirt grade must the break away holes be drilled - -
ANSWER: 4 and 18 inches
What size hole must 6 x 8 post have in it for breakaway - -
ANSWER: 3 inches
How deep below grade must the post be embedment if it is a 6 x 8 -
-ANSWER: 5 feet
Does 4 x 4 post need a breakaway hole drilled in them. - -
ANSWER: No
What do you bolt to when using a flat sheet sign , wood post or U channel. - -
ANSWER: Wood post
, How many post can you have in an exposed location of 7 feet path for a
4 x 6 - -ANSWER: Two
Advanced warning signs shall be mounted on a - -ANSWERType 1 barricade that
block less than half the walk way
All signs mounted on post shall be mounted at what height above walk
- -ANSWER: 7 feet
If sign mounted on barricades for pedestrians foot traffic has to be at minimum
what height - -ANSWER: 1 foot above sidewalk
What is the minimum candle power of lighting must be on pedestrian walkways - -
ANSWER: 1.2 foot candles
How far above the ground must be lite fixture be mounted at minimum for
pedestrian walkway - -ANSWER: 10 foot
Illumination of pedestrian walk way must be controlled by ? - -
QUESTIONS AND ANSWERS - LATEST AND
COMPLETE UPDATE WITH VERIFIED
SOLUTIONS – ASSURED PASS WITH INSTANT
DOWNLOAD PDF.
How far behind guard rail is it preferred that class A supports be located - -
ANSWER: 2 feet or 1 foot minimum
What class of sign supports shall be required at unprotected locations on ODOT s
roadway system. - -ANSWER: Class A
All class A and B supports shall be MASH or 350 compliant if used before what
date - -ANSWER: 12/31/2024
Class B supports can only be use where - -ANSWER: Within clear zone where
protected from traffic and outside the clear zone.
What is the minimum height for sign that are up less than 3 days - -ANSWER: 1
foot from roadway to bottom of sign
,What is the minimum clear distance for class A supports for signs larger that 6 x 9
- -ANSWER: 7 feet
What size must the bolts be that hold class a supports to the stubs -
-ANSWER: inch
Booster post shall be the same or _______________less than stub post
- -ANSWER: 1 pound less
When booster post is less it can be mounted where compared to the stub post. - -
ANSWER: In front
If booster post and stub post are the same Weight than the booster post must be
mounted where. - -ANSWER: On the back of the stub post.
Stub post must be limited to what height above ground when using aluminum bolts
- -ANSWER: 4 inches
How far apart are the bolts to be center to center on class A supports -
-ANSWER: 4 inches
,Which way must the hole be drill in comparison to the roadway - -ANSWER:
Perpendicular
What is the height above dirt grade must the break away holes be drilled - -
ANSWER: 4 and 18 inches
What size hole must 6 x 8 post have in it for breakaway - -
ANSWER: 3 inches
How deep below grade must the post be embedment if it is a 6 x 8 -
-ANSWER: 5 feet
Does 4 x 4 post need a breakaway hole drilled in them. - -
ANSWER: No
What do you bolt to when using a flat sheet sign , wood post or U channel. - -
ANSWER: Wood post
, How many post can you have in an exposed location of 7 feet path for a
4 x 6 - -ANSWER: Two
Advanced warning signs shall be mounted on a - -ANSWERType 1 barricade that
block less than half the walk way
All signs mounted on post shall be mounted at what height above walk
- -ANSWER: 7 feet
If sign mounted on barricades for pedestrians foot traffic has to be at minimum
what height - -ANSWER: 1 foot above sidewalk
What is the minimum candle power of lighting must be on pedestrian walkways - -
ANSWER: 1.2 foot candles
How far above the ground must be lite fixture be mounted at minimum for
pedestrian walkway - -ANSWER: 10 foot
Illumination of pedestrian walk way must be controlled by ? - -
