1|Page
SACA C 101 TEST 2026/2027 BANK /MOST OF THE
EXAM QUESTIONS WILL COME FROM
HERE||VERIFIED EXAM!! ALL EXAM QUESTIONS AND
ANSWERS/ A+ GRADED||NEWEST EXAM!!!
Which IIoT application monitors equipment during normal
operation to prevent failures to the equipment? - Answer-
Predictive maintenance
Occupational Safety and Health Administration(OSHA)
develops __________ for safety retail and service
industries to construction and manufacturing. - Answer-
Standards
The regulation that requires manufacturers to document
and report information on the types of chemicals they use,
store, release into the environment, or dispose of is known
as EPCRA. Is this statement TRUE or FALSE? - Answer-
True
The use of ___________________marked the advent of
the third industrial revolution? - Answer-Computers
,2|Page
If an operator knows a safety problem exists with a
machine, the operator should __________. - Answer-
Notify a supervisor immediately
A(n) __________ is a device or system that shuts down a
machine immediately if the operator is in danger. -
Answer-Emergency stop
If the energy sources are shut down, what would this
mean for a pneumatic valve? - Answer-It is closed
The three Fs of product design are form, fit and
__________. - Answer-Functionnn
High product quality, quick delivery, low costs are the
primary goals of what system? - Answer-Lean
Manufacturing
Which 5S step involves formatting 5S work instructions so
that they look and read alike? - Answer-Standardize
How does the 5S method aid in the goal of lean
manufacturing? - Answer-Reduces the waste of excess
, 3|Page
motion, helps improve morale, and enables other lean
methods to be more successful
What is the interface used with CNC machines to load and
monitor programs? - Answer-HMI
The automation of many different manufacturing
processes is done through the use of a small computer
called a __________. - Answer-PLC
When a machine stops due to an problem, what would the
machine's HMI typically display? - Answer-An error
message.
Smart sensors connected to manufacturing networks
creates what level of Industry? - Answer-Industry 4.0
What standard introduced in the early 1980s established a
method to physically connect machines from different
manufacturers enabling them to communicate to one
another? - Answer-Ethernet
SACA C 101 TEST 2026/2027 BANK /MOST OF THE
EXAM QUESTIONS WILL COME FROM
HERE||VERIFIED EXAM!! ALL EXAM QUESTIONS AND
ANSWERS/ A+ GRADED||NEWEST EXAM!!!
Which IIoT application monitors equipment during normal
operation to prevent failures to the equipment? - Answer-
Predictive maintenance
Occupational Safety and Health Administration(OSHA)
develops __________ for safety retail and service
industries to construction and manufacturing. - Answer-
Standards
The regulation that requires manufacturers to document
and report information on the types of chemicals they use,
store, release into the environment, or dispose of is known
as EPCRA. Is this statement TRUE or FALSE? - Answer-
True
The use of ___________________marked the advent of
the third industrial revolution? - Answer-Computers
,2|Page
If an operator knows a safety problem exists with a
machine, the operator should __________. - Answer-
Notify a supervisor immediately
A(n) __________ is a device or system that shuts down a
machine immediately if the operator is in danger. -
Answer-Emergency stop
If the energy sources are shut down, what would this
mean for a pneumatic valve? - Answer-It is closed
The three Fs of product design are form, fit and
__________. - Answer-Functionnn
High product quality, quick delivery, low costs are the
primary goals of what system? - Answer-Lean
Manufacturing
Which 5S step involves formatting 5S work instructions so
that they look and read alike? - Answer-Standardize
How does the 5S method aid in the goal of lean
manufacturing? - Answer-Reduces the waste of excess
, 3|Page
motion, helps improve morale, and enables other lean
methods to be more successful
What is the interface used with CNC machines to load and
monitor programs? - Answer-HMI
The automation of many different manufacturing
processes is done through the use of a small computer
called a __________. - Answer-PLC
When a machine stops due to an problem, what would the
machine's HMI typically display? - Answer-An error
message.
Smart sensors connected to manufacturing networks
creates what level of Industry? - Answer-Industry 4.0
What standard introduced in the early 1980s established a
method to physically connect machines from different
manufacturers enabling them to communicate to one
another? - Answer-Ethernet
