Firefighter 1, Firefighter 2 Final Exam Prep, Hazmat TCFP,
HAZMAT OPS, TCFP HAZMAT 2, Study Guide
Exam
Which pneumatic tools are often used for delicate cutting operations and can cut case
hardened locks and steel? - answerWhizzer saws
Which proportioning method uses an external pump or head pressure to force foam
concentrate into the fire stream at the correct ratio for the water flow? -
answerPremixing method
What is the term used to describe forward velocity pressure at a discharge opening
while water is flowing? - answerFlow pressure
Which of the following is NOT a question that would be asked concerning appliances
during a residential fire safety survey?
Are surge protectors being used?
Are appliances name brand?
Are electrical cords in good condition?
Are the units operating properly? - answerare appliances name brand?
Which type of pressure can be measured with a pitot tube and gauge? - answerFlow
pressure
Proportioning methods: When would batch mixing not be effective? - answerOn large
incidents because attack lines must be shut down when refilling an empty tank.
Water applied to ordinary combustibles usually _______. - answerReduce flame spread
Which type of valves are used to control the flow from the hydrant? - answerGate valves
The _____ the wood, the easier to ignite and the faster it loses structural integrity. -
answerSmaller
The threads on pump male discharge outlets are protected by fittings called _____
_____. - answerHose caps
Who should begin stabilization of a patient trapped inside a vehicle? - answerA rescuer
with EMT training
, Name one element of patient removal: - answerCovering sharp edges
Fixed-temperature heat detectors rated at _____(*f)(*c) are common for living spaces. -
answer165 | 76
Cribbing is most commonly used to _________. - answerstabilize objects
Which type of test should be preformed by private contractors or fire department
personnel? - answerStandard testing
Which proportioning method is used with portable extinguishers, wheeled,
extinguishers, skid-mounted twin-agent units, and vehicle mounted tank systems? -
answerPremixing method
One of the most important practices to address to building occupants about fire safety is
_______. - answermaking sure to maintain clear and unobstructed exit pathways
Normal pressure exiting a system before water is released from a hydrant is called
______. - answerStatic presssure
Energy created by moving parts on machines, such as belts and bearings -
answerMechanical heat energy
Water received from treatment facilities is delivered to ________ storage tanks before
being distributed throughout the area served. - answerelevated
State 3 facts about service testing: - answer1. The test area should be smooth and free
from rock and debris
2. Hose should be tested in a paved area with room to lay out the hose
3. A water source sufficient for filling the hose is necessary
Describe Completed Foam: - answercompleted product after air is introduced into the
foam solution
What can hide fire hazards and impede paths of egress? - answerpoor housekeeping
With the bank-down foam application method, the foam stream is directed: - answeronto
an object, allowing the foam to run down / onto the surface of the fuel.
Winches should be positioned: - answeras close to the object being pulled as possible
Which hydraulic tools may spread as much as 32 inches (800mm) apart? -
answerspreaders
Which pneumatic tool can be used to vacuum loose soil from around victims buried in a
trench collapse? - answerair vacuum
HAZMAT OPS, TCFP HAZMAT 2, Study Guide
Exam
Which pneumatic tools are often used for delicate cutting operations and can cut case
hardened locks and steel? - answerWhizzer saws
Which proportioning method uses an external pump or head pressure to force foam
concentrate into the fire stream at the correct ratio for the water flow? -
answerPremixing method
What is the term used to describe forward velocity pressure at a discharge opening
while water is flowing? - answerFlow pressure
Which of the following is NOT a question that would be asked concerning appliances
during a residential fire safety survey?
Are surge protectors being used?
Are appliances name brand?
Are electrical cords in good condition?
Are the units operating properly? - answerare appliances name brand?
Which type of pressure can be measured with a pitot tube and gauge? - answerFlow
pressure
Proportioning methods: When would batch mixing not be effective? - answerOn large
incidents because attack lines must be shut down when refilling an empty tank.
Water applied to ordinary combustibles usually _______. - answerReduce flame spread
Which type of valves are used to control the flow from the hydrant? - answerGate valves
The _____ the wood, the easier to ignite and the faster it loses structural integrity. -
answerSmaller
The threads on pump male discharge outlets are protected by fittings called _____
_____. - answerHose caps
Who should begin stabilization of a patient trapped inside a vehicle? - answerA rescuer
with EMT training
, Name one element of patient removal: - answerCovering sharp edges
Fixed-temperature heat detectors rated at _____(*f)(*c) are common for living spaces. -
answer165 | 76
Cribbing is most commonly used to _________. - answerstabilize objects
Which type of test should be preformed by private contractors or fire department
personnel? - answerStandard testing
Which proportioning method is used with portable extinguishers, wheeled,
extinguishers, skid-mounted twin-agent units, and vehicle mounted tank systems? -
answerPremixing method
One of the most important practices to address to building occupants about fire safety is
_______. - answermaking sure to maintain clear and unobstructed exit pathways
Normal pressure exiting a system before water is released from a hydrant is called
______. - answerStatic presssure
Energy created by moving parts on machines, such as belts and bearings -
answerMechanical heat energy
Water received from treatment facilities is delivered to ________ storage tanks before
being distributed throughout the area served. - answerelevated
State 3 facts about service testing: - answer1. The test area should be smooth and free
from rock and debris
2. Hose should be tested in a paved area with room to lay out the hose
3. A water source sufficient for filling the hose is necessary
Describe Completed Foam: - answercompleted product after air is introduced into the
foam solution
What can hide fire hazards and impede paths of egress? - answerpoor housekeeping
With the bank-down foam application method, the foam stream is directed: - answeronto
an object, allowing the foam to run down / onto the surface of the fuel.
Winches should be positioned: - answeras close to the object being pulled as possible
Which hydraulic tools may spread as much as 32 inches (800mm) apart? -
answerspreaders
Which pneumatic tool can be used to vacuum loose soil from around victims buried in a
trench collapse? - answerair vacuum
