ASNT Level III Basic 2026 Exam
Questions and Verified Answers
| Already Graded A+
Which of the following statements is true concerning the usage of SNT-TC-
1A? - 🧠 ANSWER ✔✔SNT-TC-1A is not intended to be used as a strict
specification.
The SNT-TC-1A Interpretation panel will respond to inquires about SNT-
TC-1A. The inquiries must be: - 🧠 ANSWER ✔✔written and stated in
general terms.
,Which of the following statements is true? - 🧠 ANSWER ✔✔SNT-TC-1A
was first published in the late 1960s.
With regards to the training of NDT personnel, the employer: - 🧠 ANSWER
✔✔may engage an outside service but is, nevertheless, responsible for the
certification of the company's NDT personnel.
SNT-TC-1A is intended as a guideline for employers: - 🧠 ANSWER ✔✔to
establish their own written practice for the qualification and certification of
their NDT personnel.
The following statement in the SNT-TC-1A: "It is recognized that these
guidelines may not be appropriate for certain employers, circumstances,
and/or applications." What should be done if the guidelines are not
appropriate? - 🧠 ANSWER ✔✔The employer should review the detailed
recommendations and modify them, as necessary, to meet its particular
needs with justification documented in an annex to the written practice.
Which of the following statements is true? - 🧠 ANSWER ✔✔Certification is
the written testimony of qualification.
,Who should be responsible to asses whether or not an individual should be
qualified and certified who does not perform DT, but monitors and
evaluates NDT? - 🧠 ANSWER ✔✔The individual's employer.
In SNT-TC-1A(2020) holographic testing is a technique under which of the
following NDT methods? - 🧠 ANSWER ✔✔Laser testing.
ASNT intended that the recommendation of SNT-TC-1A be applied: - 🧠
ANSWER ✔✔with flexibility and reasoning.
Of the following, which is the most appropriate to determine the needs to
qualify and certify personnel whose only NDT function is to operate digital
thickness equipment? - 🧠 ANSWER ✔✔The employer.
Certification is: - 🧠 ANSWER ✔✔written testimony of qualification.
Use of SNT-TC-1A is mandator when: - 🧠 ANSWER ✔✔it has been
specified by the customer.
The basic levels of qualification recommended by SNT-TC-1A are: - 🧠
ANSWER ✔✔Level I, Level II, and Level III.
Should personnel who operate ultrasonic digital thickness measurement
equipment be qualified and certified? - 🧠 ANSWER ✔✔Whether any NDT
COPYRIGHT©PROFFKERRYMARTIN 2025/2026. YEAR PUBLISHED 2026. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE.
PRIVACY STATEMENT. ALL RIGHTS RESERVED
, personnel should be qualified or certified depends solely upon the needs of
the employer and the requirements of the employer's customer or clientele.
According to the recommendation of SNT-TC-1A(2020), which of the
following is mandatory for certification of a Level III? - 🧠 ANSWER ✔✔Shall
meet the requirements of the employer's written practice.
According to the recommendations of SNT-TC-1A, which of the following is
true concerning a trainee's activities? - 🧠 ANSWER ✔✔The trainee may not
conduct nondestructive tests independently and may not report the results.
According to written instructions, an NDT Level I may: - 🧠 ANSWER
✔✔perform specific calibrations, specific nondestructive tests, and specific
evaluations.
May a Level I independently perform, evaluate, and sign for results of
nondestructive tests with supervision and guidance from a Level II or Level
III? - 🧠 ANSWER ✔✔Yes, the intent in SNT-TC-1A is that a level I may
perform the above functions provided that they are in accordance with
written instructions of a Level II or Level III.
Questions and Verified Answers
| Already Graded A+
Which of the following statements is true concerning the usage of SNT-TC-
1A? - 🧠 ANSWER ✔✔SNT-TC-1A is not intended to be used as a strict
specification.
The SNT-TC-1A Interpretation panel will respond to inquires about SNT-
TC-1A. The inquiries must be: - 🧠 ANSWER ✔✔written and stated in
general terms.
,Which of the following statements is true? - 🧠 ANSWER ✔✔SNT-TC-1A
was first published in the late 1960s.
With regards to the training of NDT personnel, the employer: - 🧠 ANSWER
✔✔may engage an outside service but is, nevertheless, responsible for the
certification of the company's NDT personnel.
SNT-TC-1A is intended as a guideline for employers: - 🧠 ANSWER ✔✔to
establish their own written practice for the qualification and certification of
their NDT personnel.
The following statement in the SNT-TC-1A: "It is recognized that these
guidelines may not be appropriate for certain employers, circumstances,
and/or applications." What should be done if the guidelines are not
appropriate? - 🧠 ANSWER ✔✔The employer should review the detailed
recommendations and modify them, as necessary, to meet its particular
needs with justification documented in an annex to the written practice.
Which of the following statements is true? - 🧠 ANSWER ✔✔Certification is
the written testimony of qualification.
,Who should be responsible to asses whether or not an individual should be
qualified and certified who does not perform DT, but monitors and
evaluates NDT? - 🧠 ANSWER ✔✔The individual's employer.
In SNT-TC-1A(2020) holographic testing is a technique under which of the
following NDT methods? - 🧠 ANSWER ✔✔Laser testing.
ASNT intended that the recommendation of SNT-TC-1A be applied: - 🧠
ANSWER ✔✔with flexibility and reasoning.
Of the following, which is the most appropriate to determine the needs to
qualify and certify personnel whose only NDT function is to operate digital
thickness equipment? - 🧠 ANSWER ✔✔The employer.
Certification is: - 🧠 ANSWER ✔✔written testimony of qualification.
Use of SNT-TC-1A is mandator when: - 🧠 ANSWER ✔✔it has been
specified by the customer.
The basic levels of qualification recommended by SNT-TC-1A are: - 🧠
ANSWER ✔✔Level I, Level II, and Level III.
Should personnel who operate ultrasonic digital thickness measurement
equipment be qualified and certified? - 🧠 ANSWER ✔✔Whether any NDT
COPYRIGHT©PROFFKERRYMARTIN 2025/2026. YEAR PUBLISHED 2026. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE.
PRIVACY STATEMENT. ALL RIGHTS RESERVED
, personnel should be qualified or certified depends solely upon the needs of
the employer and the requirements of the employer's customer or clientele.
According to the recommendation of SNT-TC-1A(2020), which of the
following is mandatory for certification of a Level III? - 🧠 ANSWER ✔✔Shall
meet the requirements of the employer's written practice.
According to the recommendations of SNT-TC-1A, which of the following is
true concerning a trainee's activities? - 🧠 ANSWER ✔✔The trainee may not
conduct nondestructive tests independently and may not report the results.
According to written instructions, an NDT Level I may: - 🧠 ANSWER
✔✔perform specific calibrations, specific nondestructive tests, and specific
evaluations.
May a Level I independently perform, evaluate, and sign for results of
nondestructive tests with supervision and guidance from a Level II or Level
III? - 🧠 ANSWER ✔✔Yes, the intent in SNT-TC-1A is that a level I may
perform the above functions provided that they are in accordance with
written instructions of a Level II or Level III.
