1|Page
CPSI EXAM LATEST 2026 ACTUAL VERIFIED EXAM
WITH COMPLETE QUESTIONS AND CORRECT
DETAILED ANSWERS (100% VERIFIED ANSWERS)
|ALREADY GRADED A+||NEWEST EXAM!!!||
What is min overlap use zone for To-Fro Swing support
structure? - Answer-72"
What is the dowel size of the crush/shear test probe on
Merry - Go - Rounds? - Answer-0.30" (5/16")
Entanglement hazards:
If connecting devices that have in-fill such as plastic or
cable that completely fills the interior space of both loops
preventing entry items of clothing, is this exempt? -
Answer-YES
What is the minimum footrest length of a seated spring
rocking equipment? - Answer-3 1/2"
What is the dowel size of crush / sheer hazards with
movement? - Answer-0.62" (5/8")
,2|Page
Partially Bound Openings:
The template is considered fully inserted if it goes below
the top of the opening more than ____" - Answer-3/4"
(0.75")
What is the minimum diameter of hand gripping
components? - Answer-0.95"
What is the dowel diameter for roller slides? - Answer-
0.19" (3/16")
What is the minimum diameter of handrails? - Answer-
0.95"
What is the diameter of a medium dowel? - Answer-.30"
(5/16")
What is the distance from the platform to the sliding pole?
- Answer-18"-20"
Circular use zone where swing motion occurs cannot
overlap to a distance of________________. - Answer-Y +
72"
,3|Page
(y = vertical distance from the top of sitting surface to pivot
point)
The front and rear use zone where swing motion occurs
cannot overlap for a distance of ______ to both the front
and the rear. - Answer-2x
x = the vertical distance from the protective surface to the
pivot point of the swing.
What is the handhold length of a seated rocking
equipment ? - Answer-min. length 3"
Wheelchair accessible platform:
The openings in platform, and between edge and railing
may not exceed ______" horizontal opening - Answer-1/2"
(0.5")
What is the minimum side use zone for a rotating swing
support structure? - Answer-72"
Comprehensive program of playground safety includes.... -
Answer-- audits
, 4|Page
-inspections
-maintenance
What does the middle projection gauge measure? -
Answer-projection entering brain thru eye socket
What does the large projection gauge measure? - Answer-
soft tissue damage such as bruise or ruptured organs in
abdominal area
What is the max height of a balance beam? - Answer-12"
max hgt for 2-5 yo
16" max hgt for 5-12 yo
Stepping forms must be stationary when they are
________________ - Answer->30"
What is the distance between stepping platforms? -
Answer-PS 12" max
SA 18" max
CPSI EXAM LATEST 2026 ACTUAL VERIFIED EXAM
WITH COMPLETE QUESTIONS AND CORRECT
DETAILED ANSWERS (100% VERIFIED ANSWERS)
|ALREADY GRADED A+||NEWEST EXAM!!!||
What is min overlap use zone for To-Fro Swing support
structure? - Answer-72"
What is the dowel size of the crush/shear test probe on
Merry - Go - Rounds? - Answer-0.30" (5/16")
Entanglement hazards:
If connecting devices that have in-fill such as plastic or
cable that completely fills the interior space of both loops
preventing entry items of clothing, is this exempt? -
Answer-YES
What is the minimum footrest length of a seated spring
rocking equipment? - Answer-3 1/2"
What is the dowel size of crush / sheer hazards with
movement? - Answer-0.62" (5/8")
,2|Page
Partially Bound Openings:
The template is considered fully inserted if it goes below
the top of the opening more than ____" - Answer-3/4"
(0.75")
What is the minimum diameter of hand gripping
components? - Answer-0.95"
What is the dowel diameter for roller slides? - Answer-
0.19" (3/16")
What is the minimum diameter of handrails? - Answer-
0.95"
What is the diameter of a medium dowel? - Answer-.30"
(5/16")
What is the distance from the platform to the sliding pole?
- Answer-18"-20"
Circular use zone where swing motion occurs cannot
overlap to a distance of________________. - Answer-Y +
72"
,3|Page
(y = vertical distance from the top of sitting surface to pivot
point)
The front and rear use zone where swing motion occurs
cannot overlap for a distance of ______ to both the front
and the rear. - Answer-2x
x = the vertical distance from the protective surface to the
pivot point of the swing.
What is the handhold length of a seated rocking
equipment ? - Answer-min. length 3"
Wheelchair accessible platform:
The openings in platform, and between edge and railing
may not exceed ______" horizontal opening - Answer-1/2"
(0.5")
What is the minimum side use zone for a rotating swing
support structure? - Answer-72"
Comprehensive program of playground safety includes.... -
Answer-- audits
, 4|Page
-inspections
-maintenance
What does the middle projection gauge measure? -
Answer-projection entering brain thru eye socket
What does the large projection gauge measure? - Answer-
soft tissue damage such as bruise or ruptured organs in
abdominal area
What is the max height of a balance beam? - Answer-12"
max hgt for 2-5 yo
16" max hgt for 5-12 yo
Stepping forms must be stationary when they are
________________ - Answer->30"
What is the distance between stepping platforms? -
Answer-PS 12" max
SA 18" max
