1|Page
PA APPRAISERS LICENSE EXAM LATEST 2026
ACTUAL VERIFIED EXAM WITH COMPLETE
QUESTIONS AND CORRECT DETAILED ANSWERS
(100% VERIFIED ANSWERS) |ALREADY GRADED
A+||NEWEST EXAM!!!||
When replacing the floor pan in the trunk area, what joint
should be used to join the new pan to the existing floor? -
Answer-An overlap joint
When acoustical foam is removed during the repair: -
Answer-It must be replaced with acoustical foam.
When setting up a three-dimensional measuring system, it
should be setup on an undamaged area. - Answer-Starting
in the center section is the correct method.
What is the plastic Black box in rear of the car? - Answer-
Vapor Canister
Grinding or squeaking from wheel is a sign of what? -
Answer-Bad Bearings
,2|Page
The insurance commissioner is responsible for everything
except? - Answer-Endorsing an insurance company
How do you tell when a ball joint is bad? - Answer-
Measure fixed points from knuckle to rotor
What makes the windows go up and down? - Answer-
Window regulator
What panel needs to get removed is there is damage to
the quarter panel? - Answer-The taillight
Actuator - Answer-Tells something to do something
Sensor - Answer-Take reading and tell when something is
wrong
What is Urethane Paint? - Answer-Better than acrylic,
extremely durable, and resists chipping; easier to apply
What makes up the body of the vehicle? - Answer-
Anything that is welded together
,3|Page
Who has the first right to salvage? - Answer-The insurer
What components make up a unibody? - Answer-Last
answer, longest answer on exam question
What needs to be on an appraisal? - Answer-A license
number
The photo of the Buick sedan with a rear fixed axle: -
Answer-Two wheel alignment
What are the two most common types of engines? -
Answer-V and inline
What are the two types of vehicle bodies? - Answer-
Conventional full frame and Unibody/Unitized construction
How is a diamond condition fixed? - Answer-By pulling the
damage for length. Diamond is a length condition.
When measuring a unibody vehicle, it is discovered that
the left front rail is 111mm from spec in width. What
, 4|Page
condition is this? - Answer-Width is calculated from the
center out, so a value of -111mm on the left rail shows
sway to the right and in toward centerline.
A collision damaged vehicle is discovered to be down in
height at opposite end of the center section. - Answer-
Twist condition.
When diagnosing the damage to a full frame assembly on
a sport utility vehicle, it is determined that the left side
frame rail is higher than the right side frame rail.
Technician A says the damaged state is known as a twist
condition. Technician B says a sway condition exists. Who
is right? - Answer-Tech A. When a frame rail's relationship
to the vehicle centerline is changed, such as pushed either
to the left or right, the condition is known as sway. "Twist"
is referred as the condition of the frame when entire
sections are driven higher or lower than the opposite side.
Metal fillers contain different ingredients that provide fillers
with special properties. - Answer-Fiberglass offers more
resistance to moisture
HSLA - Answer-High Strength Low Alloy
PA APPRAISERS LICENSE EXAM LATEST 2026
ACTUAL VERIFIED EXAM WITH COMPLETE
QUESTIONS AND CORRECT DETAILED ANSWERS
(100% VERIFIED ANSWERS) |ALREADY GRADED
A+||NEWEST EXAM!!!||
When replacing the floor pan in the trunk area, what joint
should be used to join the new pan to the existing floor? -
Answer-An overlap joint
When acoustical foam is removed during the repair: -
Answer-It must be replaced with acoustical foam.
When setting up a three-dimensional measuring system, it
should be setup on an undamaged area. - Answer-Starting
in the center section is the correct method.
What is the plastic Black box in rear of the car? - Answer-
Vapor Canister
Grinding or squeaking from wheel is a sign of what? -
Answer-Bad Bearings
,2|Page
The insurance commissioner is responsible for everything
except? - Answer-Endorsing an insurance company
How do you tell when a ball joint is bad? - Answer-
Measure fixed points from knuckle to rotor
What makes the windows go up and down? - Answer-
Window regulator
What panel needs to get removed is there is damage to
the quarter panel? - Answer-The taillight
Actuator - Answer-Tells something to do something
Sensor - Answer-Take reading and tell when something is
wrong
What is Urethane Paint? - Answer-Better than acrylic,
extremely durable, and resists chipping; easier to apply
What makes up the body of the vehicle? - Answer-
Anything that is welded together
,3|Page
Who has the first right to salvage? - Answer-The insurer
What components make up a unibody? - Answer-Last
answer, longest answer on exam question
What needs to be on an appraisal? - Answer-A license
number
The photo of the Buick sedan with a rear fixed axle: -
Answer-Two wheel alignment
What are the two most common types of engines? -
Answer-V and inline
What are the two types of vehicle bodies? - Answer-
Conventional full frame and Unibody/Unitized construction
How is a diamond condition fixed? - Answer-By pulling the
damage for length. Diamond is a length condition.
When measuring a unibody vehicle, it is discovered that
the left front rail is 111mm from spec in width. What
, 4|Page
condition is this? - Answer-Width is calculated from the
center out, so a value of -111mm on the left rail shows
sway to the right and in toward centerline.
A collision damaged vehicle is discovered to be down in
height at opposite end of the center section. - Answer-
Twist condition.
When diagnosing the damage to a full frame assembly on
a sport utility vehicle, it is determined that the left side
frame rail is higher than the right side frame rail.
Technician A says the damaged state is known as a twist
condition. Technician B says a sway condition exists. Who
is right? - Answer-Tech A. When a frame rail's relationship
to the vehicle centerline is changed, such as pushed either
to the left or right, the condition is known as sway. "Twist"
is referred as the condition of the frame when entire
sections are driven higher or lower than the opposite side.
Metal fillers contain different ingredients that provide fillers
with special properties. - Answer-Fiberglass offers more
resistance to moisture
HSLA - Answer-High Strength Low Alloy
