SACA CERTIFICATION C-101 EXAM
AND SACA BASIC OPERATIONS C-
101 EXAM QUESTIONS AND
VERIFIED ANSWERS WITH C-101
CERTIFIED INDUSTRY 4.0
ASSOCIATE 1-BASIC OPERATIONS
AND A STUDY GUIDE|LATEST
UPDATE!!!
Function - ............ANSWER.............. The three Fs of product design are form, fit
and __________.
Lean Manufacturing - ............ANSWER.............. High product quality, quick
delivery, low costs are the primary goals of what system?
Standardize - ............ANSWER.............. Which 5S step involves formatting 5S
work instructions so that they look and read alike?
Reduces the waste of excess motion, helps improve morale, and enables other lean
methods to be more successful - ............ANSWER.............. How does the 5S
method aid in the goal of lean manufacturing?
HMI - ............ANSWER.............. What is the interface used with CNC machines
to load and monitor programs?
1|Page
,PLC - ............ANSWER.............. The automation of many different manufacturing
processes is done through the use of a small computer called a __________.
An error message. - ............ANSWER.............. When a machine stops due to an
problem, what would the machine's HMI typically display?
Industry 4.0 - ............ANSWER.............. Smart sensors connected to
manufacturing networks creates what level of Industry?
Ethernet - ............ANSWER.............. What standard introduced in the early 1980s
established a method to physically connect machines from different manufacturers
enabling them to communicate to one another?
Predictive maintenance - ............ANSWER.............. Which IIoT application
monitors equipment during normal operation to prevent failures to the equipment?
Standards - ............ANSWER.............. Occupational Safety and Health
Administration(OSHA) develops __________ for safety retail and service
industries to construction and manufacturing.
True - ............ANSWER.............. The regulation that requires manufacturers to
document and report information on the types of chemicals they use, store, release
into the environment, or dispose of is known as EPCRA. Is this statement TRUE or
FALSE?
Computers - ............ANSWER.............. The use of ___________________marked
the advent of the third industrial revolution?
Notify a supervisor immediately - ............ANSWER.............. If an operator knows
a safety problem exists with a machine, the operator should __________.
2|Page
,Emergency stop - ............ANSWER.............. A(n) __________ is a device or
system that shuts down a machine immediately if the operator is in danger.
It is closed - ............ANSWER.............. If the energy sources are shut down, what
would this mean for a pneumatic valve?
1. Shut down the equipment
2.Connect Hasp
3. Attach Lock
4. Add Tag
5. Test Start Equipment - ............ANSWER.............. What are the 5 steps of
electrical Lockout/tagout
Falls - ............ANSWER.............. Which of the following is a common cause of
workplace death?
Hazard assessment - ............ANSWER.............. The process of identifying
potential hazards in the workplace is known as a __________.
TRUE - ............ANSWER.............. An injury is defined as physical harm to the
body that happens as a result of exposure to some form of energy that exceeds the
body's tolerance. Is this statement TRUE or FALSE?
Shut down their machines and leave the building - ............ANSWER.............. In
the event of an evacuation alarm, employees should __________.
3|Page
, 15 - ............ANSWER.............. After exposure to most chemicals the eyes should
be flushed continuously for __________ minutes.
Thickeners - ............ANSWER.............. Grease is made from a liquid lubricant
with what added to it to make it semi-solid?
Pictograms - ............ANSWER.............. What does the GHS hazardous material
classification systems use to identify the danger of a material?
16 - ............ANSWER.............. Every Safety Data Sheet must follow the same
format that has __________ sections.
SDS - ............ANSWER.............. Safe handling procedures of chemicals are found
in the __________.
First in, first out - ............ANSWER.............. __________ is a system that rotates
chemical stock to ensure they are used within their shelf life.
Explosive - ............ANSWER.............. An orange DOT label indicates the material
is __________.
DOT Hazardous Materials Table - ............ANSWER.............. Before shipping a
hazardous material, review the __________, which provides directions for
packaging, labels, UN ID, and required paperwork for shipment.
Educating employees on fire hazards and prevention - ............ANSWER..............
The first step in fire and electrical safety is __________.
4|Page
AND SACA BASIC OPERATIONS C-
101 EXAM QUESTIONS AND
VERIFIED ANSWERS WITH C-101
CERTIFIED INDUSTRY 4.0
ASSOCIATE 1-BASIC OPERATIONS
AND A STUDY GUIDE|LATEST
UPDATE!!!
Function - ............ANSWER.............. The three Fs of product design are form, fit
and __________.
Lean Manufacturing - ............ANSWER.............. High product quality, quick
delivery, low costs are the primary goals of what system?
Standardize - ............ANSWER.............. Which 5S step involves formatting 5S
work instructions so that they look and read alike?
Reduces the waste of excess motion, helps improve morale, and enables other lean
methods to be more successful - ............ANSWER.............. How does the 5S
method aid in the goal of lean manufacturing?
HMI - ............ANSWER.............. What is the interface used with CNC machines
to load and monitor programs?
1|Page
,PLC - ............ANSWER.............. The automation of many different manufacturing
processes is done through the use of a small computer called a __________.
An error message. - ............ANSWER.............. When a machine stops due to an
problem, what would the machine's HMI typically display?
Industry 4.0 - ............ANSWER.............. Smart sensors connected to
manufacturing networks creates what level of Industry?
Ethernet - ............ANSWER.............. What standard introduced in the early 1980s
established a method to physically connect machines from different manufacturers
enabling them to communicate to one another?
Predictive maintenance - ............ANSWER.............. Which IIoT application
monitors equipment during normal operation to prevent failures to the equipment?
Standards - ............ANSWER.............. Occupational Safety and Health
Administration(OSHA) develops __________ for safety retail and service
industries to construction and manufacturing.
True - ............ANSWER.............. The regulation that requires manufacturers to
document and report information on the types of chemicals they use, store, release
into the environment, or dispose of is known as EPCRA. Is this statement TRUE or
FALSE?
Computers - ............ANSWER.............. The use of ___________________marked
the advent of the third industrial revolution?
Notify a supervisor immediately - ............ANSWER.............. If an operator knows
a safety problem exists with a machine, the operator should __________.
2|Page
,Emergency stop - ............ANSWER.............. A(n) __________ is a device or
system that shuts down a machine immediately if the operator is in danger.
It is closed - ............ANSWER.............. If the energy sources are shut down, what
would this mean for a pneumatic valve?
1. Shut down the equipment
2.Connect Hasp
3. Attach Lock
4. Add Tag
5. Test Start Equipment - ............ANSWER.............. What are the 5 steps of
electrical Lockout/tagout
Falls - ............ANSWER.............. Which of the following is a common cause of
workplace death?
Hazard assessment - ............ANSWER.............. The process of identifying
potential hazards in the workplace is known as a __________.
TRUE - ............ANSWER.............. An injury is defined as physical harm to the
body that happens as a result of exposure to some form of energy that exceeds the
body's tolerance. Is this statement TRUE or FALSE?
Shut down their machines and leave the building - ............ANSWER.............. In
the event of an evacuation alarm, employees should __________.
3|Page
, 15 - ............ANSWER.............. After exposure to most chemicals the eyes should
be flushed continuously for __________ minutes.
Thickeners - ............ANSWER.............. Grease is made from a liquid lubricant
with what added to it to make it semi-solid?
Pictograms - ............ANSWER.............. What does the GHS hazardous material
classification systems use to identify the danger of a material?
16 - ............ANSWER.............. Every Safety Data Sheet must follow the same
format that has __________ sections.
SDS - ............ANSWER.............. Safe handling procedures of chemicals are found
in the __________.
First in, first out - ............ANSWER.............. __________ is a system that rotates
chemical stock to ensure they are used within their shelf life.
Explosive - ............ANSWER.............. An orange DOT label indicates the material
is __________.
DOT Hazardous Materials Table - ............ANSWER.............. Before shipping a
hazardous material, review the __________, which provides directions for
packaging, labels, UN ID, and required paperwork for shipment.
Educating employees on fire hazards and prevention - ............ANSWER..............
The first step in fire and electrical safety is __________.
4|Page
