PHYSICAL SECURITY-- (SPED), Physical Security Certification (PSC), DCSA
SPeD: Physical Security Certification (PSC)
Study online at https://quizlet.com/_8jiw6f
1. Before you can conduct a risk analysis based on the impact and likelihood of
an unwanted event happening, what steps in the risk management process
must you take first? Identify (3): Identify assets
Identify threats
Identify vulnerabilities
2. Which policy should you consult to find the physical security requirements of
protecting classified information?: DoDM 5200.01, Volumes 1-4 DoD Information Security Program
3. Which policy authorizes commanders to issue regulations for the protection
or security of property and places under their command?: DoDI 5200.08, Security of DoD
Installations and Resources and the DoD Physical
Security Review Board (PSRB)
4. Which of the following individuals should be included in a Threat Working
Group?: Chemical, biological, radiological, nuclear and high yield explosive representative, Information operations
representative, Operations security officer, Law enforcement, Counterintelligence, Antiterrorism Officer
5. Which of these can be made of solid steel to make them more attack resis-
tant?: Doors
6. Which of these house ventilation systems that should be secured with steel
bars?: Roofs
7. Which of these should be covered with a protective film to make them less
dangerous in an attack?: Windows
8. Which of the following locks are approved to secure classified information or
material?: Kaba Mas X-10, S&G 8077/AD
9. At a minimum _________ should include special and general guard orders,
access and material control, protective barriers, lighting systems, locks, and
Intrusion Detection Systems (IDS).: Physical Security Plans
10. Assets fall into 5 categories, name all 5 of them.: 1. People
2. Information
3. Equipment
4. Facilities and
5. Activities and Operations
, PHYSICAL SECURITY-- (SPED), Physical Security Certification (PSC), DCSA
SPeD: Physical Security Certification (PSC)
Study online at https://quizlet.com/_8jiw6f
11. Who provides construction and security
requirements for SCIFs?: Director of National Intelligence (DNI)
12. Who provides accreditation for SCIFs?: Defense Intelligence Agency (DIA)
13. They are used by the intelligence community to store classified information.-
: SCIFs are used by the intelligence community to store
classified information called Sensitive Compartmented Information (SCI).
14. Warning signs must be posted at each boundary of a restricted area and
must be conspicuous to those approaching on foot or by vehicle. T/F: True
15. The use of master key systems is acceptable in the storage of AA&E.: False. The
use of master key systems is not authorized in AA&E storage facilities.
16. The first line of defense in any physical security system is usually some form
of?: perimeter protection system
17. What kind of fencing is used when a stationary perimeter requires protec-
tion?: Permanent
18. What kind of fencing can be used as a temporary perimeter to establish psy-
chological barriers and to channel pedestrian and vehicle movement.: Temporary
19. The basic manual access control system is simply?: personal recognition.
20. Although there are many different types of locks, they all share three com-
ponents.: Locking device
Switching device
Operating mechanism
21. Some key-operated locks are built into the door or container they are secur-
ing. These are also known as: Mortise locks, because their case is recessed, or mortised into a door or
container.
22. The __________________ is the most common of all door locks in use today.: -
cylindrical lock
23. What kind of locks are used for securing classified information?: Electromechanical
combination locks
24. When a container is taken out of service, the combination must be reset
back to the factory settings. The factory setting for a built-in container lock
is?: 50-25-50.
, PHYSICAL SECURITY-- (SPED), Physical Security Certification (PSC), DCSA
SPeD: Physical Security Certification (PSC)
Study online at https://quizlet.com/_8jiw6f
25. You just received a security container that has the S&G 2740 Electromechani-
cal Safe Lock with a factory setting of 50-25-50. What should you do first?: Calibrate
the lock
26. Certification and accreditation (C&A) for Storage of Classified DoD Informa-
tion Systems.
A. DoD Manual 5100.76M governs the C&A for Storage of Classified DoD Infor-
mation Systems.
B. Designated Accrediting Authority (DAAs) have the authority and responsibil-
ity for accreditation decisions.: B
27. A. Physical security is the branch of security that is only concerned with active
measures designed to prevent unauthorized access.
B. Physical security aims to safeguard assets against espionage, sabotage,
terrorism, damage, and criminal activity.: B
28. Which of the following is true of access control measures?: Access control is integral
and interoperable part of DoD installation physical security programs.
The installation commander/facility director is responsible for defining access control measures consistent with DoD
policy.
29. Which of the following is NOT a physical security measure?: Marking classified
documents.
30. Name 3 physical security measures?: Perimeter Fences
Security Guards
Alarm Systems
31. What does a physical security program aim to prevent unauthorized access
to? (4): Personnel
Equipment
Installations
Information
32. What are considered access control measures? (3): Identification Cards
Security Guards
Locks and Keys
SPeD: Physical Security Certification (PSC)
Study online at https://quizlet.com/_8jiw6f
1. Before you can conduct a risk analysis based on the impact and likelihood of
an unwanted event happening, what steps in the risk management process
must you take first? Identify (3): Identify assets
Identify threats
Identify vulnerabilities
2. Which policy should you consult to find the physical security requirements of
protecting classified information?: DoDM 5200.01, Volumes 1-4 DoD Information Security Program
3. Which policy authorizes commanders to issue regulations for the protection
or security of property and places under their command?: DoDI 5200.08, Security of DoD
Installations and Resources and the DoD Physical
Security Review Board (PSRB)
4. Which of the following individuals should be included in a Threat Working
Group?: Chemical, biological, radiological, nuclear and high yield explosive representative, Information operations
representative, Operations security officer, Law enforcement, Counterintelligence, Antiterrorism Officer
5. Which of these can be made of solid steel to make them more attack resis-
tant?: Doors
6. Which of these house ventilation systems that should be secured with steel
bars?: Roofs
7. Which of these should be covered with a protective film to make them less
dangerous in an attack?: Windows
8. Which of the following locks are approved to secure classified information or
material?: Kaba Mas X-10, S&G 8077/AD
9. At a minimum _________ should include special and general guard orders,
access and material control, protective barriers, lighting systems, locks, and
Intrusion Detection Systems (IDS).: Physical Security Plans
10. Assets fall into 5 categories, name all 5 of them.: 1. People
2. Information
3. Equipment
4. Facilities and
5. Activities and Operations
, PHYSICAL SECURITY-- (SPED), Physical Security Certification (PSC), DCSA
SPeD: Physical Security Certification (PSC)
Study online at https://quizlet.com/_8jiw6f
11. Who provides construction and security
requirements for SCIFs?: Director of National Intelligence (DNI)
12. Who provides accreditation for SCIFs?: Defense Intelligence Agency (DIA)
13. They are used by the intelligence community to store classified information.-
: SCIFs are used by the intelligence community to store
classified information called Sensitive Compartmented Information (SCI).
14. Warning signs must be posted at each boundary of a restricted area and
must be conspicuous to those approaching on foot or by vehicle. T/F: True
15. The use of master key systems is acceptable in the storage of AA&E.: False. The
use of master key systems is not authorized in AA&E storage facilities.
16. The first line of defense in any physical security system is usually some form
of?: perimeter protection system
17. What kind of fencing is used when a stationary perimeter requires protec-
tion?: Permanent
18. What kind of fencing can be used as a temporary perimeter to establish psy-
chological barriers and to channel pedestrian and vehicle movement.: Temporary
19. The basic manual access control system is simply?: personal recognition.
20. Although there are many different types of locks, they all share three com-
ponents.: Locking device
Switching device
Operating mechanism
21. Some key-operated locks are built into the door or container they are secur-
ing. These are also known as: Mortise locks, because their case is recessed, or mortised into a door or
container.
22. The __________________ is the most common of all door locks in use today.: -
cylindrical lock
23. What kind of locks are used for securing classified information?: Electromechanical
combination locks
24. When a container is taken out of service, the combination must be reset
back to the factory settings. The factory setting for a built-in container lock
is?: 50-25-50.
, PHYSICAL SECURITY-- (SPED), Physical Security Certification (PSC), DCSA
SPeD: Physical Security Certification (PSC)
Study online at https://quizlet.com/_8jiw6f
25. You just received a security container that has the S&G 2740 Electromechani-
cal Safe Lock with a factory setting of 50-25-50. What should you do first?: Calibrate
the lock
26. Certification and accreditation (C&A) for Storage of Classified DoD Informa-
tion Systems.
A. DoD Manual 5100.76M governs the C&A for Storage of Classified DoD Infor-
mation Systems.
B. Designated Accrediting Authority (DAAs) have the authority and responsibil-
ity for accreditation decisions.: B
27. A. Physical security is the branch of security that is only concerned with active
measures designed to prevent unauthorized access.
B. Physical security aims to safeguard assets against espionage, sabotage,
terrorism, damage, and criminal activity.: B
28. Which of the following is true of access control measures?: Access control is integral
and interoperable part of DoD installation physical security programs.
The installation commander/facility director is responsible for defining access control measures consistent with DoD
policy.
29. Which of the following is NOT a physical security measure?: Marking classified
documents.
30. Name 3 physical security measures?: Perimeter Fences
Security Guards
Alarm Systems
31. What does a physical security program aim to prevent unauthorized access
to? (4): Personnel
Equipment
Installations
Information
32. What are considered access control measures? (3): Identification Cards
Security Guards
Locks and Keys
