PHYSICAL SECURITY-- (SPED)
Study online at https://quizlet.com/_6g66a9
1. The two primary purposes of physical security are protection and
_______________?: Prevention
2. A guard checking IDs at the gate of an installation is a good example of
what type of security?: Point security
3. ___________ is the layering of physical security countermeasures such as
fencing, guards, cameras, lighting, and locks.: Security-in-depth
4. Before you can conduct a risk analysis based on the impact and likelihood of
an unwanted
event happening, what steps in the risk management process must you take
first?: Identify assets
Identify threats
Identify vulnerabilities
5. Which policy guidance would you consult to find the minimum standards for
the physical protection of DoD assets?: DoD 5200.08-R, Physical Security Program
6. Which policy should you consult to find the physical security requirements
of protecting classified information?: DoDM 5200.01, Volumes 1-4 DoD Information Security Pro-
gram
7. Which policy authorizes commanders to issue regulations for the protection
or security of property and places under their command?: DoDI 5200.08, Security of DoD
Installations and Resources and the DoD Physical
Security Review Board (PSRB)
8. Who is charged with management, implementation, and direction of all phys-
ical security programs?: Physical Security Officer
9. Who is responsible for providing valuable information on the capabilities,
intentions, and threats of adversaries?: CI Support
10. Who is responsible for developing countermeasures against potential
threats to national security and other DoD assets?: OPSEC Officer
11. Which of the following individuals should be included in a Threat Working
Group?: Chemical, biological, radiological, nuclear and high yield explosive representative, Information operations
representative, Operations security officer, Law enforcement, Counterintelligence, Antiterrorism Officer
12. Which of these can be made of solid steel to make them more attack resis-
tant?: Doors
1/8
, PHYSICAL SECURITY-- (SPED)
Study online at https://quizlet.com/_6g66a9
13. Which of these house ventilation systems that should be secured with steel
bars?: Roofs
14. Which of these should be covered with a protective film to make them less
dangerous in an attack?: Windows
15. Which of the following locks are approved to secure classified information or
material?: Kaba Mas X-10, S&G 8077/AD
16. Standby lighting is used when regular lighting is not available?: False
17. Site lighting is used to enable guard force personnel to observe activities
inside or outside the installation?: True
18. Movable lighting is used when supplemental lighting is needed such as at
construction sites?: True
19. At a minimum _________ should include special and general guard orders,
access and material control, protective barriers, lighting systems, locks, and
Intrusion Detection Systems (IDS).: Physical Security Plans
20. ________ establish duties, roles, and responsibilities at individual assign-
ments, checkpoints, gates, and guard posts.: Post Orders
21. ___________provide supplemental guidance for physical security programs
and establish procedures for emergency events as well as operational and
administrative procedures.: Standard Operating Procedures
22. True or False. Commanders may only implement measures according to the
FPCON level in force at the time.: False
23. True or False. Commanders must comply with and integrate DoD physical
security and installation access control policies into their FPCON plans.: True
24. True or False. Commanders educate their personnel on the insider threat to
DoD elements and personnel.: True
25. Which of the following statements are true of physical security planning
and implementation?: The risk management process must be used to plan which physical security measures
should be utilized to protect DoD assets.
26. Of the following, TERRORIST, FENCE, OPEN UNATTENDED INSTALLATION
GATE, ARMS AND AMMUNITION, LOSS OF LIFE, would best be described as a
DoD asset?: ARMS AND AMMUNITION
2/8
Study online at https://quizlet.com/_6g66a9
1. The two primary purposes of physical security are protection and
_______________?: Prevention
2. A guard checking IDs at the gate of an installation is a good example of
what type of security?: Point security
3. ___________ is the layering of physical security countermeasures such as
fencing, guards, cameras, lighting, and locks.: Security-in-depth
4. Before you can conduct a risk analysis based on the impact and likelihood of
an unwanted
event happening, what steps in the risk management process must you take
first?: Identify assets
Identify threats
Identify vulnerabilities
5. Which policy guidance would you consult to find the minimum standards for
the physical protection of DoD assets?: DoD 5200.08-R, Physical Security Program
6. Which policy should you consult to find the physical security requirements
of protecting classified information?: DoDM 5200.01, Volumes 1-4 DoD Information Security Pro-
gram
7. Which policy authorizes commanders to issue regulations for the protection
or security of property and places under their command?: DoDI 5200.08, Security of DoD
Installations and Resources and the DoD Physical
Security Review Board (PSRB)
8. Who is charged with management, implementation, and direction of all phys-
ical security programs?: Physical Security Officer
9. Who is responsible for providing valuable information on the capabilities,
intentions, and threats of adversaries?: CI Support
10. Who is responsible for developing countermeasures against potential
threats to national security and other DoD assets?: OPSEC Officer
11. Which of the following individuals should be included in a Threat Working
Group?: Chemical, biological, radiological, nuclear and high yield explosive representative, Information operations
representative, Operations security officer, Law enforcement, Counterintelligence, Antiterrorism Officer
12. Which of these can be made of solid steel to make them more attack resis-
tant?: Doors
1/8
, PHYSICAL SECURITY-- (SPED)
Study online at https://quizlet.com/_6g66a9
13. Which of these house ventilation systems that should be secured with steel
bars?: Roofs
14. Which of these should be covered with a protective film to make them less
dangerous in an attack?: Windows
15. Which of the following locks are approved to secure classified information or
material?: Kaba Mas X-10, S&G 8077/AD
16. Standby lighting is used when regular lighting is not available?: False
17. Site lighting is used to enable guard force personnel to observe activities
inside or outside the installation?: True
18. Movable lighting is used when supplemental lighting is needed such as at
construction sites?: True
19. At a minimum _________ should include special and general guard orders,
access and material control, protective barriers, lighting systems, locks, and
Intrusion Detection Systems (IDS).: Physical Security Plans
20. ________ establish duties, roles, and responsibilities at individual assign-
ments, checkpoints, gates, and guard posts.: Post Orders
21. ___________provide supplemental guidance for physical security programs
and establish procedures for emergency events as well as operational and
administrative procedures.: Standard Operating Procedures
22. True or False. Commanders may only implement measures according to the
FPCON level in force at the time.: False
23. True or False. Commanders must comply with and integrate DoD physical
security and installation access control policies into their FPCON plans.: True
24. True or False. Commanders educate their personnel on the insider threat to
DoD elements and personnel.: True
25. Which of the following statements are true of physical security planning
and implementation?: The risk management process must be used to plan which physical security measures
should be utilized to protect DoD assets.
26. Of the following, TERRORIST, FENCE, OPEN UNATTENDED INSTALLATION
GATE, ARMS AND AMMUNITION, LOSS OF LIFE, would best be described as a
DoD asset?: ARMS AND AMMUNITION
2/8
