CALIFORNIA ASBESTOS CONSULTANT (CAC)
LICENSE EXAM ACTUAL QUESTIONS AND
ANSWERS - LATEST AND COMPLETE UPDATE
WITH VERIFIED SOLUTIONS – ASSURED PASS
WITH INSTANT DOWNLOAD PDF.
1. A California Asbestos Consultant (CAC) is primarily responsible for which
of the following functions on an asbestos-related project?
A. Performing physical asbestos abatement activities
B. Providing professional oversight, evaluation, and regulatory
compliance consulting
C. Manufacturing asbestos-containing materials
D. Acting as a labor union representative
Rationale: Under California law, a CAC provides professional consulting
services such as inspection, exposure assessment, project design, and
compliance oversight, but does not perform abatement work.
2. Which regulation primarily governs occupational exposure to asbestos for
workers in California?
A. EPA NESHAP
B. Cal/OSHA Title 8 regulations
C. AHERA
D. DOT Hazardous Materials Regulations
Rationale: Cal/OSHA Title 8 establishes permissible exposure limits (PELs),
work practices, and worker protection requirements specific to California.
3. The term “asbestos-containing material (ACM)” is best defined as material
containing:
A. Any detectable asbestos fiber
, B. Asbestos only if friable
C. More than 1 percent asbestos by weight
D. Asbestos only in insulation products
Rationale: Both federal and California regulations define ACM as material
containing greater than 1% asbestos.
4. Friable asbestos-containing material is best described as material that:
A. Cannot release fibers under any condition
B. Can be crumbled, pulverized, or reduced to powder by hand
pressure when dry
C. Is always found in pipe insulation
D. Has been encapsulated
Rationale: Friability determines the potential for fiber release and is a key
risk factor in exposure assessments.
5. Which federal regulation specifically addresses asbestos in demolition and
renovation activities?
A. AHERA
B. EPA NESHAP for asbestos
C. Cal/OSHA Title 8
D. TSCA Title II
Rationale: EPA’s National Emission Standards for Hazardous Air
Pollutants (NESHAP) regulate asbestos emissions during demolition and
renovation.
6. A CAC conducting an asbestos survey must ensure that sampling strategies
are:
A. Based solely on building age
B. Representative and statistically defensible
C. Limited to visibly damaged materials
, D. Determined by the abatement contractor
Rationale: Representative sampling ensures reliable identification of ACM
and supports defensible professional conclusions.
7. Which analytical method is most commonly used for bulk asbestos sample
analysis?
A. TEM
B. PCM
C. PLM
D. XRD
Rationale: Polarized Light Microscopy (PLM) is the standard method for
bulk material analysis.
8. A CAC identifies ACM in a school building. Which federal regulation
provides specific requirements for asbestos management in schools?
A. NESHAP
B. Cal/OSHA Title 8
C. AHERA
D. DOT regulations
Rationale: The Asbestos Hazard Emergency Response Act (AHERA)
establishes inspection and management plan requirements for schools.
9. Which of the following best describes the CAC’s ethical obligation when
identifying asbestos hazards?
A. Minimize findings to reduce project costs
B. Defer judgment to the building owner
C. Report findings accurately and objectively
D. Only disclose results if requested
Rationale: Professional ethics require objectivity, accuracy, and full
disclosure regardless of cost or inconvenience.
, 10.The primary health concern associated with inhalation of asbestos fibers is:
A. Acute allergic reaction
B. Chronic respiratory disease and cancer
C. Temporary irritation only
D. Skin absorption toxicity
Rationale: Asbestos exposure is linked to asbestosis, lung cancer, and
mesothelioma.
11.Which agency enforces asbestos-related worker safety requirements in
California?
A. EPA
B. Cal/OSHA
C. DTSC
D. ARB
Rationale: Cal/OSHA enforces workplace health and safety regulations,
including asbestos standards.
12.A CAC preparing an asbestos abatement project design must primarily
consider:
A. Contractor profit margins
B. Building aesthetics
C. Regulatory compliance and exposure control
D. Owner convenience
Rationale: Project designs must prioritize safety, regulatory compliance,
and effective exposure mitigation.
13.Which document outlines the scope, methods, and controls for an asbestos
abatement project?
A. Chain-of-custody form
B. Project specifications and design
LICENSE EXAM ACTUAL QUESTIONS AND
ANSWERS - LATEST AND COMPLETE UPDATE
WITH VERIFIED SOLUTIONS – ASSURED PASS
WITH INSTANT DOWNLOAD PDF.
1. A California Asbestos Consultant (CAC) is primarily responsible for which
of the following functions on an asbestos-related project?
A. Performing physical asbestos abatement activities
B. Providing professional oversight, evaluation, and regulatory
compliance consulting
C. Manufacturing asbestos-containing materials
D. Acting as a labor union representative
Rationale: Under California law, a CAC provides professional consulting
services such as inspection, exposure assessment, project design, and
compliance oversight, but does not perform abatement work.
2. Which regulation primarily governs occupational exposure to asbestos for
workers in California?
A. EPA NESHAP
B. Cal/OSHA Title 8 regulations
C. AHERA
D. DOT Hazardous Materials Regulations
Rationale: Cal/OSHA Title 8 establishes permissible exposure limits (PELs),
work practices, and worker protection requirements specific to California.
3. The term “asbestos-containing material (ACM)” is best defined as material
containing:
A. Any detectable asbestos fiber
, B. Asbestos only if friable
C. More than 1 percent asbestos by weight
D. Asbestos only in insulation products
Rationale: Both federal and California regulations define ACM as material
containing greater than 1% asbestos.
4. Friable asbestos-containing material is best described as material that:
A. Cannot release fibers under any condition
B. Can be crumbled, pulverized, or reduced to powder by hand
pressure when dry
C. Is always found in pipe insulation
D. Has been encapsulated
Rationale: Friability determines the potential for fiber release and is a key
risk factor in exposure assessments.
5. Which federal regulation specifically addresses asbestos in demolition and
renovation activities?
A. AHERA
B. EPA NESHAP for asbestos
C. Cal/OSHA Title 8
D. TSCA Title II
Rationale: EPA’s National Emission Standards for Hazardous Air
Pollutants (NESHAP) regulate asbestos emissions during demolition and
renovation.
6. A CAC conducting an asbestos survey must ensure that sampling strategies
are:
A. Based solely on building age
B. Representative and statistically defensible
C. Limited to visibly damaged materials
, D. Determined by the abatement contractor
Rationale: Representative sampling ensures reliable identification of ACM
and supports defensible professional conclusions.
7. Which analytical method is most commonly used for bulk asbestos sample
analysis?
A. TEM
B. PCM
C. PLM
D. XRD
Rationale: Polarized Light Microscopy (PLM) is the standard method for
bulk material analysis.
8. A CAC identifies ACM in a school building. Which federal regulation
provides specific requirements for asbestos management in schools?
A. NESHAP
B. Cal/OSHA Title 8
C. AHERA
D. DOT regulations
Rationale: The Asbestos Hazard Emergency Response Act (AHERA)
establishes inspection and management plan requirements for schools.
9. Which of the following best describes the CAC’s ethical obligation when
identifying asbestos hazards?
A. Minimize findings to reduce project costs
B. Defer judgment to the building owner
C. Report findings accurately and objectively
D. Only disclose results if requested
Rationale: Professional ethics require objectivity, accuracy, and full
disclosure regardless of cost or inconvenience.
, 10.The primary health concern associated with inhalation of asbestos fibers is:
A. Acute allergic reaction
B. Chronic respiratory disease and cancer
C. Temporary irritation only
D. Skin absorption toxicity
Rationale: Asbestos exposure is linked to asbestosis, lung cancer, and
mesothelioma.
11.Which agency enforces asbestos-related worker safety requirements in
California?
A. EPA
B. Cal/OSHA
C. DTSC
D. ARB
Rationale: Cal/OSHA enforces workplace health and safety regulations,
including asbestos standards.
12.A CAC preparing an asbestos abatement project design must primarily
consider:
A. Contractor profit margins
B. Building aesthetics
C. Regulatory compliance and exposure control
D. Owner convenience
Rationale: Project designs must prioritize safety, regulatory compliance,
and effective exposure mitigation.
13.Which document outlines the scope, methods, and controls for an asbestos
abatement project?
A. Chain-of-custody form
B. Project specifications and design
