MASSACHUSETTS MASTER PIPEFITTER QUESTIONS
WITH VERIFIED ACCURATE ANSWERS 2026
Jack Stands - Answers -Vertically adjustable support devices used in the repair or
fabrication of pipe are called ________________ .
Strap - Answers -Polished or plated pipe is removed or installed with a(n)
___________________ wrench to prevent damage to the pipe.
Level - Answers -A pipe that is horizontally aligned is referred to as being
_______________.
Framing - Answers -Spirit level 18 to 48 inches long are commonly referred to as
__________________ levels.
Combination TRI - Answers -Tables and graduations that eliminate many calculations
are available on the ________________ square.
hi-lo guage - Answers -Pipe joints misalignment is checked with a _______________.
Drift Pin - Answers -To align bolt holes when connecting flanges, use a
_______________.
Two-hole pin - Answers -Which of the following is used to orient a flange on the end of
a pipe?
Forward - Answers -A hacksaw cuts on the _________________ stroke.
Reamer - Answers -Internal burrs on pipe and tubing are removed with a(n)
______________________.
Cannot be mixed - Answers -Die sets for hand pipe threaders ______________.
Sharp - Answers -Use care in handling freshly cut pipe threads because they are
___________________.
One - Answers -When threading pipe using a manual pipe threader, the thread cutting
process is complete when _____________________ thread(s) extend from the back of
the last tooth.
Soil Pipe Cutter - Answers -Ductile Pipe cannot be cut with a(n)
___________________.
Spring - Answers -The simplest hand bending tool is the _______________ bender.
WITH VERIFIED ACCURATE ANSWERS 2026
Jack Stands - Answers -Vertically adjustable support devices used in the repair or
fabrication of pipe are called ________________ .
Strap - Answers -Polished or plated pipe is removed or installed with a(n)
___________________ wrench to prevent damage to the pipe.
Level - Answers -A pipe that is horizontally aligned is referred to as being
_______________.
Framing - Answers -Spirit level 18 to 48 inches long are commonly referred to as
__________________ levels.
Combination TRI - Answers -Tables and graduations that eliminate many calculations
are available on the ________________ square.
hi-lo guage - Answers -Pipe joints misalignment is checked with a _______________.
Drift Pin - Answers -To align bolt holes when connecting flanges, use a
_______________.
Two-hole pin - Answers -Which of the following is used to orient a flange on the end of
a pipe?
Forward - Answers -A hacksaw cuts on the _________________ stroke.
Reamer - Answers -Internal burrs on pipe and tubing are removed with a(n)
______________________.
Cannot be mixed - Answers -Die sets for hand pipe threaders ______________.
Sharp - Answers -Use care in handling freshly cut pipe threads because they are
___________________.
One - Answers -When threading pipe using a manual pipe threader, the thread cutting
process is complete when _____________________ thread(s) extend from the back of
the last tooth.
Soil Pipe Cutter - Answers -Ductile Pipe cannot be cut with a(n)
___________________.
Spring - Answers -The simplest hand bending tool is the _______________ bender.
