MARKING CBT EXAM QUESTIONS AND
ANSWERS GRADED A+ 2025/2026
The beginning point and all subsequent centerline cone placements should be offset ________
feet to the left of the new centerline. - ANS 2
What is used as a guide for centerline painting? - ANS traffic cones or paint marks
A "T" clear zone is laid out to mark ________. - ANS A runway crater
Centerline Station Number One is located ________ from the initial offset centerline point. -
ANS 200 feet
On a uni-diretional MOS, the highest numbered DTG marker must be on the ________ side of
the MOS facing ________ the Primary Operational Threshold. - ANS right, toward
The MOS is likely to expand in both length and width when - ANS more craters are repaired
What is the best reason not to drive or step on freshly painted airfield lines? - ANS It creates
extra or confusing lines on the new MOS
1 @COPYRIGHT 2026 ALLRIGHTS RESERVED.
, What is the next step in the installation process once the necessary preparations are
accomplished to provide the PAPI units with a base at the proper elevation? - ANS The PAPI
unit locations must be verified using a surveying instrument
Which of the following includes a 40-inch high black circle on a bright orange diamond-shaped
face? - ANS Aircraft Arresting System Marker
Under normal conditions, unless you are directed otheriwse, use ________ for the design
Approach Slope Angle. - ANS 3.00 degrees
What color is used for DTG markers? - ANS Bright orange background with black border and
numbers
The Operational Threshold will be determined by - ANS
Unneeded traffic cones should be - ANS stacked onto the truck for transport back to the
staging area
Fighter jets are generally classified in - ANS TCH#1
The MOS marker that does not require sandbags or other ballast to stand alone is the -
ANS Edge marker
How many DTG markers are in the MOS marking system? - ANS 18
Where are the aircraft arresting system markers placed? - ANS Two markers are placed on
opposite sides of the MOS
2 @COPYRIGHT 2026 ALLRIGHTS RESERVED.