1|Page
NCCER BOILERMAKER FINAL EXAM LATEST 2026 ACTUAL EXAM
WITH COMPLETE QUESTIONS AND CORRECT DETAILED ANSWERS
(100% VERIFIED ANSWERS) |ALREADY GRADED A+| ||PROFESSOR
VERIFIED|| ||BRANDNEW!!!||
The organization that requires a person to be trained to operate
personal lifting equipment. - ANSWER-OSHA
A gasket found in high pressure systems. - ANSWER-RTJ Gasket
Examples include all except slide fastener. - ANSWER-Internal
manway hardware
The fitting that makes it easy to disassemble threaded pipe. -
ANSWER-Union
A type of wrench that measures how much a fastener is being
tightened. - ANSWER-Torque wrench
Used to create a seal between two stationary parts. - ANSWER-
Gasket
,2|Page
The first consideration when making a gasket. - ANSWER-
Material compatibility
The best tool to use to lift the bundle to line up with the shell side
gasket. - ANSWER-Drift pin
May be affected by all of the following except the number of bolts.
- ANSWER-Ring gaskets
The teeth should face away from the handle. - ANSWER-
Hacksaw blade
The pressure is the same for both 1" and 10" pipes when both are
20" tall. - ANSWER-Pressure of pipes
If it stops on the 2nd thread, stop because something is wrong. -
ANSWER-Threaded connection
, 3|Page
The material used to seal off between the floating tube sheet and
test ring in a heat exchanger. - ANSWER-Permatex
Usually required when ducts are bolted together. - ANSWER-
Gasket for duct
Caused by all except the partition plate being too short. -
ANSWER-Tube sheet damage
Should be removed when pressure testing the vessel. -
ANSWER-Relief valve
Tie rods are attached to the baffle on an exchanger tube bundle. -
ANSWER-Baffle components
All except improper inspection are associated with vessel
confined space. - ANSWER-Safety hazards
Valves used to relieve pressure in a pipeline. - ANSWER-Safety
valve
NCCER BOILERMAKER FINAL EXAM LATEST 2026 ACTUAL EXAM
WITH COMPLETE QUESTIONS AND CORRECT DETAILED ANSWERS
(100% VERIFIED ANSWERS) |ALREADY GRADED A+| ||PROFESSOR
VERIFIED|| ||BRANDNEW!!!||
The organization that requires a person to be trained to operate
personal lifting equipment. - ANSWER-OSHA
A gasket found in high pressure systems. - ANSWER-RTJ Gasket
Examples include all except slide fastener. - ANSWER-Internal
manway hardware
The fitting that makes it easy to disassemble threaded pipe. -
ANSWER-Union
A type of wrench that measures how much a fastener is being
tightened. - ANSWER-Torque wrench
Used to create a seal between two stationary parts. - ANSWER-
Gasket
,2|Page
The first consideration when making a gasket. - ANSWER-
Material compatibility
The best tool to use to lift the bundle to line up with the shell side
gasket. - ANSWER-Drift pin
May be affected by all of the following except the number of bolts.
- ANSWER-Ring gaskets
The teeth should face away from the handle. - ANSWER-
Hacksaw blade
The pressure is the same for both 1" and 10" pipes when both are
20" tall. - ANSWER-Pressure of pipes
If it stops on the 2nd thread, stop because something is wrong. -
ANSWER-Threaded connection
, 3|Page
The material used to seal off between the floating tube sheet and
test ring in a heat exchanger. - ANSWER-Permatex
Usually required when ducts are bolted together. - ANSWER-
Gasket for duct
Caused by all except the partition plate being too short. -
ANSWER-Tube sheet damage
Should be removed when pressure testing the vessel. -
ANSWER-Relief valve
Tie rods are attached to the baffle on an exchanger tube bundle. -
ANSWER-Baffle components
All except improper inspection are associated with vessel
confined space. - ANSWER-Safety hazards
Valves used to relieve pressure in a pipeline. - ANSWER-Safety
valve
