VIVINT SMART HOME PRO
FINAL EXAM QUESTIONS AND
ANSWERS GRADED A+ 2025/2026
12-24v - ANS What is the input voltage range of the Doorbell Cam?
16.5 VAC - ANS What is the output voltage of the transformer used to power the SkyControl
panel?
true - ANS True or False: When programming a sensor into the sky panel you can type in the
serial number or "learn" it in by triggering the device
2 - ANS When programming a DW21, which loop number is used?
1
2
3
beans and wire caps - ANS Which of the following materials can you use to group multiple
ground terminals in a takeover module:
Solder
String
1 @COPYRIGHT 2026 ALLRIGHTS RESERVED.
, Wire Caps
Duct Tape
Beans
True - ANS T or F: When installing the firefighter, it is required to test the customer's existing
smoke detectors
3/4" - ANS When installing a DW21, what size bit should you use to drill the hole for the
sensor?
1/2"
3/8"
3/4"
1"
True - ANS T or F: When installing the TAKE-345, you must ensure that the transformer is
supplying power to the power supply before the battery.
True - ANS T or F: You are required to test signals from all secondary keypads and key fobs
even though they are not detection devices
False - ANS T or F: When running power to the TAKE-345 polarity does not apply
- ANS What is the correct height at which to install the PIR2?
7 ft
At least 5 ft
At least 7 ft
At 7.5 ft
2 @COPYRIGHT 2026 ALLRIGHTS RESERVED.
FINAL EXAM QUESTIONS AND
ANSWERS GRADED A+ 2025/2026
12-24v - ANS What is the input voltage range of the Doorbell Cam?
16.5 VAC - ANS What is the output voltage of the transformer used to power the SkyControl
panel?
true - ANS True or False: When programming a sensor into the sky panel you can type in the
serial number or "learn" it in by triggering the device
2 - ANS When programming a DW21, which loop number is used?
1
2
3
beans and wire caps - ANS Which of the following materials can you use to group multiple
ground terminals in a takeover module:
Solder
String
1 @COPYRIGHT 2026 ALLRIGHTS RESERVED.
, Wire Caps
Duct Tape
Beans
True - ANS T or F: When installing the firefighter, it is required to test the customer's existing
smoke detectors
3/4" - ANS When installing a DW21, what size bit should you use to drill the hole for the
sensor?
1/2"
3/8"
3/4"
1"
True - ANS T or F: When installing the TAKE-345, you must ensure that the transformer is
supplying power to the power supply before the battery.
True - ANS T or F: You are required to test signals from all secondary keypads and key fobs
even though they are not detection devices
False - ANS T or F: When running power to the TAKE-345 polarity does not apply
- ANS What is the correct height at which to install the PIR2?
7 ft
At least 5 ft
At least 7 ft
At 7.5 ft
2 @COPYRIGHT 2026 ALLRIGHTS RESERVED.