CSA Standard W47.1-09 - CWB Welding Supervisor ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
study guide WXE1.1 Exam with accurate detailed ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
solutions
Does the CSA Standard W47.1 specify the requirements for a company seeking
||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
certification? - correct answer✔✔Yes, This standard provides the requirements for the ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
certification of companies engaged in the fusion welding of steel and the qualification of ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
their personnel and welding procedures (Cl 1.1)
||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
Who is responsible for the welded products a company produces? - correct answer✔✔The
||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
company (1.2) The requirements of this standard are based on the principle that a certified
||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
company has full responsibility for the quality of the welded product it produces and this
||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
responsibility cannot be transferred to its employed or retained personnel or to the ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
administrator of this standard. ||\\//|| ||\\//|| ||\\//||
Does this standard approve the products and services of a certified company? - correct
||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
answer✔✔(Cl. 1.3) This standard governs the certification of companies. Certification ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
pertains to the capability of the company with respect to welding. Certification should not
||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
be construed as approving any products or services of the certified company.
||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
What requirements are stipulated in CSA Standard W47.1 - correct answer✔✔(Cl. 1.4) This
||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
standard stipulates requirements for: ||\\//|| ||\\//|| ||\\//||
- welding engineers
||\\//|| ||\\//||
- welding supervisors
||\\//|| ||\\//||
- tack welders, welders and welding operators
||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
- documentation
||\\//||
What standard or code reference publications are referred to in CSA Standard W47.1? -
||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
correct answer✔✔(Cl. 2.1, 2.2) This standard refers to the following publications, and
||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
,where such reference is made, it shall be to the edition listed below, including all
||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
amendments published there to: ||\\//|| ||\\//|| ||\\//||
CSA (Canadian Standards Association)
||\\//|| ||\\//|| ||\\//||
CAN/CSA-G30.18-M92(R2007) - Billet-steel bars for concrete reinforcement ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
G40.20/G40.21-04(R2009) - General requirements for rolled or welded structural quality ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
steel/ Structural quality steel ||\\//|| ||\\//|| ||\\//||
W48-06 - Filler metals and allied materials for metal arc welding ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
W59-03(R2008) - Welded steel construction (metal arc welding) ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
CAN/CSA-W117.2-06 - Safety in welding, cutting, and allied processes ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
W178.1-08 - Certification of welding inspection organizations ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
ASTM International (American Society for Testing and Materials)
||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
A 370-08a - Standard Test Methods and Definitions for Mechanical Testing of Steel Products
||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
E 10-07a - Standard Test Method for Brinell Hardness of Metallic Materials.
||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
E23-07ae1 - Standard Test Methods for Notched Bar Impact Testing of Metallic Materials ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
AWS (American Welding Society) ||\\//|| ||\\//|| ||\\//||
A3.0-01
Standard Definitions; Including Terms for Adhesive Bonding, Brazing, Soldering, Thermal ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
Cutting, and Thermal Spraying ||\\//|| ||\\//|| ||\\//||
A5.12/A5.12M-98 (R2007) - Specification for Tungsten and Tungsten-Alloy Electrodes for ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
Arc Welding and Cutting
||\\//|| ||\\//|| ||\\//||
A.518/A518M-05 - Specification for Carbon Steel Electrodes and Rods for Gas Shielded Arc ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
Welding
, A5.23/A5.23M-07 - Specification for Low-Alloy Steel Electrodes and Fluxes for Submerged ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
Arc Welding ||\\//||
A5.28/A5.28M-05 - Specification for Low-Alloy Steel Electrodes and Rods for Gas Shielded ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
Arc Welding ||\\//||
D1.1/D1.1M - Structural Welding Code - Steel ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
D1.3/D1.3M - Structural Welding Code - Sheet Steel ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
D1.6/D1.6M - Structural Welding Code - Stainless Steel ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
SCC (Standards Council of Canada) ||\\//|| ||\\//|| ||\\//|| ||\\//||
Can-P-4E - General requirements for the Competence of Testing and Calibration ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
Laboratories.
What is the difference between "class" and "classification"? - correct answer✔✔(Cl.3) Class -
||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
a category of welder qualification, e.g., the flat (F), horizontal (H), vertical (V), or overhead
||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
(O) welding positions.
||\\//|| ||\\//|| ||\\//||
Classification - refers to the various types of welding personnel e.g., T, S, FW, ASW or WT ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
What are the welding personnel classifications specified in CSA standard W47.1? - correct
||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
answer✔✔(Cl.3) Classification - T, S, FW, ASW, or WT welding personnel as follows: ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
- "T" refers to a welder's and welding operator's ability to weld from one side without
||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
backing and achieve complete penetration in the root pass, e.g., hollow section, pipe and ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
plate.
- "S" refers to a welder's and welding operator's ability to weld plates and rolled or hollow
||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
sections for the full thickness of material, when welding from both sides with backing, or ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
for welding square groove welds from both sides, without backgouging, within the
||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
thickness limitations of the accepted welding procedure data sheets for the process used. ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
- "FW" refers to a welder's and welding operator's ability to deposit fillet welds and tack
||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
welds.
study guide WXE1.1 Exam with accurate detailed ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
solutions
Does the CSA Standard W47.1 specify the requirements for a company seeking
||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
certification? - correct answer✔✔Yes, This standard provides the requirements for the ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
certification of companies engaged in the fusion welding of steel and the qualification of ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
their personnel and welding procedures (Cl 1.1)
||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
Who is responsible for the welded products a company produces? - correct answer✔✔The
||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
company (1.2) The requirements of this standard are based on the principle that a certified
||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
company has full responsibility for the quality of the welded product it produces and this
||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
responsibility cannot be transferred to its employed or retained personnel or to the ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
administrator of this standard. ||\\//|| ||\\//|| ||\\//||
Does this standard approve the products and services of a certified company? - correct
||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
answer✔✔(Cl. 1.3) This standard governs the certification of companies. Certification ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
pertains to the capability of the company with respect to welding. Certification should not
||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
be construed as approving any products or services of the certified company.
||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
What requirements are stipulated in CSA Standard W47.1 - correct answer✔✔(Cl. 1.4) This
||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
standard stipulates requirements for: ||\\//|| ||\\//|| ||\\//||
- welding engineers
||\\//|| ||\\//||
- welding supervisors
||\\//|| ||\\//||
- tack welders, welders and welding operators
||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
- documentation
||\\//||
What standard or code reference publications are referred to in CSA Standard W47.1? -
||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
correct answer✔✔(Cl. 2.1, 2.2) This standard refers to the following publications, and
||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
,where such reference is made, it shall be to the edition listed below, including all
||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
amendments published there to: ||\\//|| ||\\//|| ||\\//||
CSA (Canadian Standards Association)
||\\//|| ||\\//|| ||\\//||
CAN/CSA-G30.18-M92(R2007) - Billet-steel bars for concrete reinforcement ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
G40.20/G40.21-04(R2009) - General requirements for rolled or welded structural quality ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
steel/ Structural quality steel ||\\//|| ||\\//|| ||\\//||
W48-06 - Filler metals and allied materials for metal arc welding ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
W59-03(R2008) - Welded steel construction (metal arc welding) ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
CAN/CSA-W117.2-06 - Safety in welding, cutting, and allied processes ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
W178.1-08 - Certification of welding inspection organizations ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
ASTM International (American Society for Testing and Materials)
||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
A 370-08a - Standard Test Methods and Definitions for Mechanical Testing of Steel Products
||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
E 10-07a - Standard Test Method for Brinell Hardness of Metallic Materials.
||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
E23-07ae1 - Standard Test Methods for Notched Bar Impact Testing of Metallic Materials ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
AWS (American Welding Society) ||\\//|| ||\\//|| ||\\//||
A3.0-01
Standard Definitions; Including Terms for Adhesive Bonding, Brazing, Soldering, Thermal ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
Cutting, and Thermal Spraying ||\\//|| ||\\//|| ||\\//||
A5.12/A5.12M-98 (R2007) - Specification for Tungsten and Tungsten-Alloy Electrodes for ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
Arc Welding and Cutting
||\\//|| ||\\//|| ||\\//||
A.518/A518M-05 - Specification for Carbon Steel Electrodes and Rods for Gas Shielded Arc ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
Welding
, A5.23/A5.23M-07 - Specification for Low-Alloy Steel Electrodes and Fluxes for Submerged ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
Arc Welding ||\\//||
A5.28/A5.28M-05 - Specification for Low-Alloy Steel Electrodes and Rods for Gas Shielded ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
Arc Welding ||\\//||
D1.1/D1.1M - Structural Welding Code - Steel ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
D1.3/D1.3M - Structural Welding Code - Sheet Steel ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
D1.6/D1.6M - Structural Welding Code - Stainless Steel ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
SCC (Standards Council of Canada) ||\\//|| ||\\//|| ||\\//|| ||\\//||
Can-P-4E - General requirements for the Competence of Testing and Calibration ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
Laboratories.
What is the difference between "class" and "classification"? - correct answer✔✔(Cl.3) Class -
||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
a category of welder qualification, e.g., the flat (F), horizontal (H), vertical (V), or overhead
||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
(O) welding positions.
||\\//|| ||\\//|| ||\\//||
Classification - refers to the various types of welding personnel e.g., T, S, FW, ASW or WT ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
What are the welding personnel classifications specified in CSA standard W47.1? - correct
||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
answer✔✔(Cl.3) Classification - T, S, FW, ASW, or WT welding personnel as follows: ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
- "T" refers to a welder's and welding operator's ability to weld from one side without
||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
backing and achieve complete penetration in the root pass, e.g., hollow section, pipe and ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
plate.
- "S" refers to a welder's and welding operator's ability to weld plates and rolled or hollow
||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
sections for the full thickness of material, when welding from both sides with backing, or ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
for welding square groove welds from both sides, without backgouging, within the
||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
thickness limitations of the accepted welding procedure data sheets for the process used. ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
- "FW" refers to a welder's and welding operator's ability to deposit fillet welds and tack
||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//|| ||\\//||
welds.
