UC ADV HEALTH ASSESSMENT - QUIZ 1 QUESTIONS &
ANSWERS 2025
What 3 criteria are needed for interruption of fire protection and life safety systems during effects? -
CORRECT ANSWERS-1) Approval of AHJ
2) Owner or owners agent
3) having a fire watch there at all times
Permanently installed indoor effects can only interrupt during the initial acceptance of the system
Documentation of flame effect - CORRECT ANSWERS-Drawing manuals or written
descriptions of all flame effects must be created and on site, available to AHJ
Must also have written operating instructions including start-up, show operations, normal shutdown
procedures, and emergency shutdown procedures
-Operating instructions must be available to the operator
Housekeeping - CORRECT ANSWERS-premises where flame effect devices are installed or
fired shall be maintained in a neat and orderly condition
Protective clothing - CORRECT ANSWERS-any required should be tested and demonstrated to
be flame retardant
documentation will also be furnished
flame effect operator age - CORRECT ANSWERS-21 and up
Fire - CORRECT ANSWERS-after arm, it is the control system functions that result in the
deliberate release of fuel for ignition
, Flame effect burner - CORRECT ANSWERS-A burner designed to produce specific sizes and
configurations of flames for flame effects
Flame effect material - CORRECT ANSWERS-A flammable material that is used as fuel to
create a flame
Flame effect safety controller - CORRECT ANSWERS-A control system that is part of a flame
effect appliance that is used to prove that the source of ignition is present (flame safeguard control)
Group II flame effect - CORRECT ANSWERS-An individual or group flame effect designed fro
unattended operation that is temporarily or permanently installed outside any sructure (eternal
monument flame)
Group III flame effect - CORRECT ANSWERS-An attended, temporarily installed flame effect
for a specific production with limited operation and fixed time for removal
Group IV flame effect - CORRECT ANSWERS-Large or group flame effect that is permanently
installed inside or outside any structure desined for unattended operation WITHOUT a main show
supervisory control system
Group V flame effect - CORRECT ANSWERS-A large individual or group flame effect that is
temporarily or permanently installed inside or outside any structure and is designed for intermittent or
continuous operation under the supervision of a main show control system, but without full-time
supervision by a technition
Group VI flame effect - CORRECT ANSWERS-A large individual or group flame effect that is
temporarily or permanently installed outside or inside any structure and is designed for intermittent
operation under the supervision of a main show control system and a technical director, with cast
members in close proximity to the effect at the time of operation
Group VII flame effect - CORRECT ANSWERS-an individual flame effect that can be tomprarily
or permanently installed inside or outside any structure that, due to its unique operating requirements,
does not fit into any other classification
ANSWERS 2025
What 3 criteria are needed for interruption of fire protection and life safety systems during effects? -
CORRECT ANSWERS-1) Approval of AHJ
2) Owner or owners agent
3) having a fire watch there at all times
Permanently installed indoor effects can only interrupt during the initial acceptance of the system
Documentation of flame effect - CORRECT ANSWERS-Drawing manuals or written
descriptions of all flame effects must be created and on site, available to AHJ
Must also have written operating instructions including start-up, show operations, normal shutdown
procedures, and emergency shutdown procedures
-Operating instructions must be available to the operator
Housekeeping - CORRECT ANSWERS-premises where flame effect devices are installed or
fired shall be maintained in a neat and orderly condition
Protective clothing - CORRECT ANSWERS-any required should be tested and demonstrated to
be flame retardant
documentation will also be furnished
flame effect operator age - CORRECT ANSWERS-21 and up
Fire - CORRECT ANSWERS-after arm, it is the control system functions that result in the
deliberate release of fuel for ignition
, Flame effect burner - CORRECT ANSWERS-A burner designed to produce specific sizes and
configurations of flames for flame effects
Flame effect material - CORRECT ANSWERS-A flammable material that is used as fuel to
create a flame
Flame effect safety controller - CORRECT ANSWERS-A control system that is part of a flame
effect appliance that is used to prove that the source of ignition is present (flame safeguard control)
Group II flame effect - CORRECT ANSWERS-An individual or group flame effect designed fro
unattended operation that is temporarily or permanently installed outside any sructure (eternal
monument flame)
Group III flame effect - CORRECT ANSWERS-An attended, temporarily installed flame effect
for a specific production with limited operation and fixed time for removal
Group IV flame effect - CORRECT ANSWERS-Large or group flame effect that is permanently
installed inside or outside any structure desined for unattended operation WITHOUT a main show
supervisory control system
Group V flame effect - CORRECT ANSWERS-A large individual or group flame effect that is
temporarily or permanently installed inside or outside any structure and is designed for intermittent or
continuous operation under the supervision of a main show control system, but without full-time
supervision by a technition
Group VI flame effect - CORRECT ANSWERS-A large individual or group flame effect that is
temporarily or permanently installed outside or inside any structure and is designed for intermittent
operation under the supervision of a main show control system and a technical director, with cast
members in close proximity to the effect at the time of operation
Group VII flame effect - CORRECT ANSWERS-an individual flame effect that can be tomprarily
or permanently installed inside or outside any structure that, due to its unique operating requirements,
does not fit into any other classification
