CASE
MAXXUM 110 Multi-controller
MAXXUM 120 Multi-controller
MAXXUM 130 Multi-controller
MAXXUM 115 Multi-controller
MAXXUM 125 Multi-controller
MAXXUM 140 Multi-controller
TRACTORS
OPERATOR'S MANUAL
, Electro-magnetic compatibility (EMC)
This tractor complies strictly with the European Regulations on electro-magnetic emissions.
However, interference may arise following the installation of any additional equipment, as this may
not necessarily meet the required standards.
Because electromagnetic interference can seriously affect the function of the vehicle and/or give
rise to dangerous situations, you MUST observe the following:
● Ensure that all equipment from third-party manufacturers fitted on the tractor carries the CE
mark.
● The maximum output level of equipment that emits radiation (radios, telephones etc.) must not
exceed the legal limits prescribed in the country in which you are operating the tractor.
● The electromagnetic field created by auxiliary equipment must never exceed 24V/m, particularly
in proximity to electronic components.
Failure to comply with these requirements will render the Case IH warranty null and void.
, TABLE OF CONTENTS
SECTION 1 1
GENERAL INFORMATION AND SAFETY 1
END USER LICENCE AGREEMENT TERMS .................................................................... ..................... 1-2
ECOLOGY AND THE ENVIRONMENT ....................................................................................................1-6
SAFETY PRECAUTIONS .........................................................................................................................1-7
ROLL OVER PROTECTIVE STRUCTURE .................................................................. .......................... 1-13
SAFETY LABELS ...................................................................................................................................1-14
INTERNATIONAL SYMBOLS .................................................................................................................1-19
AIRBORNE NOISE EMISSION .................................................................................... .......................... 1-20
SECTION 2 1
CONTROLS, INSTRUMENTS AND OPERATION 1
BEFORE STARTING UP ..........................................................................................................................2-1
CAB CONTROLS ......................................................................................................................................2-2
PROGRAMMING THE DISPLAYS .........................................................................................................2-54
GEARBOX OPERATION ........................................................................................................................2-60
SECTION 3 1
FIELD OPERATION 1
BEFORE STARTING UP ..........................................................................................................................3-1
TOWING THE TRACTOR .........................................................................................................................3-3
TRANSPORTING THE TRACTOR ...........................................................................................................3-4
STARTING THE ENGINE .........................................................................................................................3-7
STOPPING THE ENGINE .................................................................. .................................................... 3-10
CONSTANT ENGINE SPEED CONTROL ..............................................................................................3-13
HEADLAND MANAGEMENT CONTROL (HMC) ................................................................ ................... 3-15
TURN ASSIST STEERING ASSISTANCE (if fitted) ...............................................................................3-25
REAR PTO ..............................................................................................................................................3-27
FRONT PTO AND HYDRAULIC FRONT POWER LIFT
(where fitted) .......................................................................................................................................3-42
ELECTRONIC FRONT POWER LIFT CONTROL EFH (where fitted) ....................................................3-47
ELECTRONIC POWER LIFT CONTROL (EDC) .......................................................... .......................... 3-52
ELECTRO-HYDRAULIC REMOTE CONTROL VALVES .......................................................................3-66
3-POINT POWER LIFT LINKAGE .......................................................................... ................................ 3-81
LIFT RODS, LOWER AND TOP LINKS ..................................................................................................3-83
DRAWBARS AND TOWING ATTACHMENTS .......................................................................................3-91
REAR TOW HITCH .................................................................................................................................3-96
HYDRAULIC TRAILER BRAKES ........................................................................... .............................. 3-110
PNEUMATIC TRAILER BRAKES .........................................................................................................3-112
FRONT WHEEL TRACK SETTING ......................................................................................................3-118
REAR WHEEL TRACK SETTING ............................................................. ........................................... 3-123
TRACTOR WEIGHT .............................................................................................................................3-130
TYRE AIR PRESSURE LEVELS AND PERMISSIBLE LOAD BEARING CAPACITIES ......................3-137
, SECTION 4 1
LUBRICATION AND MAINTENANCE 1
GENERAL NOTES .............................................................................................................. ..................... 4-1
LUBRICANTS AND COOLANTS .............................................................................................................. 4-8
LUBRICATION AND MAINTENANCE TABLE .................................................................... ................... 4-10
WHEN WARNING LIGHTS ARE ILLUMINATED ............................................................................. ...... 4-12
EVERY 10 OPERATING HOURS OR DAILY ................................................................................... ...... 4-16
EVERY 50 OPERATING HOURS .......................................................................... ................................ 4-19
EVERY 100 OPERATING HOURS ........................................................................ ................................ 4-26
EVERY 300 OPERATING HOURS ........................................................................ ................................ 4-27
EVERY 600 OPERATING HOURS ........................................................................ ................................ 4-31
EVERY 1200 OPERATING HOURS OR 12 MONTHS .......................................................................... 4-38
EVERY 1200 OPERATING HOURS OR 2 YEARS .................................................................. ............. 4-43
EVERY 3 YEARS ............................................................................................ ....................................... 4-50
GENERAL MAINTENANCE ............................................................................ ....................................... 4-51
FUSES AND RELAYS .............................................................................. ............................................. 4-59
PROTECTION FOR ELECTRONIC AND ELECTRICAL SYSTEMS WHEN CHARGING THE BATTERY OR
DURING WELDING WORK . ....................................................................... ....................................... 4-64
SECTION 5 1
TROUBLESHOOTING 1
ENGINE ........................................................................... ......................................................................... 5-2
GEARBOX .......................................................................................... ...................................................... 5-5
HYDRAULICS .................................................................. ......................................................................... 5-6
3-POINT POWER LIFT LINKAGE ................................... ......................................................................... 5-7
BRAKES .......................................................................... ......................................................................... 5-8
CAB ............................................................................................. ............................................................ 5-9
ELECTRICAL SYSTEM ................................................................................... ....................................... 5-10
SECTION 6 1
VEHICLE STORAGE 1
TRACTOR STORAGE ............................................................ .................................................................. 6-1
SECTION 7 1
ADDITIONAL EQUIPMENT 1
SECTION 8 1
TRACTOR SPECIFICATION 1
VEHICLE WEIGHTS ........................................................................................................... ..................... 8-6
ENGINE ........................................................................... ......................................................................... 8-7
FUEL SYSTEM ............................................................................. ............................................................ 8-7
COOLING SYSTEM ..................................................................................................... ............................ 8-7
GEARBOX .............................................................................. .................................................................. 8-8
BRAKES .......................................................................... ......................................................................... 8-8
REAR PTO ............................................................................................................................................... 8-8
FRONT PTO .................................................................... ......................................................................... 8-9
MAXXUM 110 Multi-controller
MAXXUM 120 Multi-controller
MAXXUM 130 Multi-controller
MAXXUM 115 Multi-controller
MAXXUM 125 Multi-controller
MAXXUM 140 Multi-controller
TRACTORS
OPERATOR'S MANUAL
, Electro-magnetic compatibility (EMC)
This tractor complies strictly with the European Regulations on electro-magnetic emissions.
However, interference may arise following the installation of any additional equipment, as this may
not necessarily meet the required standards.
Because electromagnetic interference can seriously affect the function of the vehicle and/or give
rise to dangerous situations, you MUST observe the following:
● Ensure that all equipment from third-party manufacturers fitted on the tractor carries the CE
mark.
● The maximum output level of equipment that emits radiation (radios, telephones etc.) must not
exceed the legal limits prescribed in the country in which you are operating the tractor.
● The electromagnetic field created by auxiliary equipment must never exceed 24V/m, particularly
in proximity to electronic components.
Failure to comply with these requirements will render the Case IH warranty null and void.
, TABLE OF CONTENTS
SECTION 1 1
GENERAL INFORMATION AND SAFETY 1
END USER LICENCE AGREEMENT TERMS .................................................................... ..................... 1-2
ECOLOGY AND THE ENVIRONMENT ....................................................................................................1-6
SAFETY PRECAUTIONS .........................................................................................................................1-7
ROLL OVER PROTECTIVE STRUCTURE .................................................................. .......................... 1-13
SAFETY LABELS ...................................................................................................................................1-14
INTERNATIONAL SYMBOLS .................................................................................................................1-19
AIRBORNE NOISE EMISSION .................................................................................... .......................... 1-20
SECTION 2 1
CONTROLS, INSTRUMENTS AND OPERATION 1
BEFORE STARTING UP ..........................................................................................................................2-1
CAB CONTROLS ......................................................................................................................................2-2
PROGRAMMING THE DISPLAYS .........................................................................................................2-54
GEARBOX OPERATION ........................................................................................................................2-60
SECTION 3 1
FIELD OPERATION 1
BEFORE STARTING UP ..........................................................................................................................3-1
TOWING THE TRACTOR .........................................................................................................................3-3
TRANSPORTING THE TRACTOR ...........................................................................................................3-4
STARTING THE ENGINE .........................................................................................................................3-7
STOPPING THE ENGINE .................................................................. .................................................... 3-10
CONSTANT ENGINE SPEED CONTROL ..............................................................................................3-13
HEADLAND MANAGEMENT CONTROL (HMC) ................................................................ ................... 3-15
TURN ASSIST STEERING ASSISTANCE (if fitted) ...............................................................................3-25
REAR PTO ..............................................................................................................................................3-27
FRONT PTO AND HYDRAULIC FRONT POWER LIFT
(where fitted) .......................................................................................................................................3-42
ELECTRONIC FRONT POWER LIFT CONTROL EFH (where fitted) ....................................................3-47
ELECTRONIC POWER LIFT CONTROL (EDC) .......................................................... .......................... 3-52
ELECTRO-HYDRAULIC REMOTE CONTROL VALVES .......................................................................3-66
3-POINT POWER LIFT LINKAGE .......................................................................... ................................ 3-81
LIFT RODS, LOWER AND TOP LINKS ..................................................................................................3-83
DRAWBARS AND TOWING ATTACHMENTS .......................................................................................3-91
REAR TOW HITCH .................................................................................................................................3-96
HYDRAULIC TRAILER BRAKES ........................................................................... .............................. 3-110
PNEUMATIC TRAILER BRAKES .........................................................................................................3-112
FRONT WHEEL TRACK SETTING ......................................................................................................3-118
REAR WHEEL TRACK SETTING ............................................................. ........................................... 3-123
TRACTOR WEIGHT .............................................................................................................................3-130
TYRE AIR PRESSURE LEVELS AND PERMISSIBLE LOAD BEARING CAPACITIES ......................3-137
, SECTION 4 1
LUBRICATION AND MAINTENANCE 1
GENERAL NOTES .............................................................................................................. ..................... 4-1
LUBRICANTS AND COOLANTS .............................................................................................................. 4-8
LUBRICATION AND MAINTENANCE TABLE .................................................................... ................... 4-10
WHEN WARNING LIGHTS ARE ILLUMINATED ............................................................................. ...... 4-12
EVERY 10 OPERATING HOURS OR DAILY ................................................................................... ...... 4-16
EVERY 50 OPERATING HOURS .......................................................................... ................................ 4-19
EVERY 100 OPERATING HOURS ........................................................................ ................................ 4-26
EVERY 300 OPERATING HOURS ........................................................................ ................................ 4-27
EVERY 600 OPERATING HOURS ........................................................................ ................................ 4-31
EVERY 1200 OPERATING HOURS OR 12 MONTHS .......................................................................... 4-38
EVERY 1200 OPERATING HOURS OR 2 YEARS .................................................................. ............. 4-43
EVERY 3 YEARS ............................................................................................ ....................................... 4-50
GENERAL MAINTENANCE ............................................................................ ....................................... 4-51
FUSES AND RELAYS .............................................................................. ............................................. 4-59
PROTECTION FOR ELECTRONIC AND ELECTRICAL SYSTEMS WHEN CHARGING THE BATTERY OR
DURING WELDING WORK . ....................................................................... ....................................... 4-64
SECTION 5 1
TROUBLESHOOTING 1
ENGINE ........................................................................... ......................................................................... 5-2
GEARBOX .......................................................................................... ...................................................... 5-5
HYDRAULICS .................................................................. ......................................................................... 5-6
3-POINT POWER LIFT LINKAGE ................................... ......................................................................... 5-7
BRAKES .......................................................................... ......................................................................... 5-8
CAB ............................................................................................. ............................................................ 5-9
ELECTRICAL SYSTEM ................................................................................... ....................................... 5-10
SECTION 6 1
VEHICLE STORAGE 1
TRACTOR STORAGE ............................................................ .................................................................. 6-1
SECTION 7 1
ADDITIONAL EQUIPMENT 1
SECTION 8 1
TRACTOR SPECIFICATION 1
VEHICLE WEIGHTS ........................................................................................................... ..................... 8-6
ENGINE ........................................................................... ......................................................................... 8-7
FUEL SYSTEM ............................................................................. ............................................................ 8-7
COOLING SYSTEM ..................................................................................................... ............................ 8-7
GEARBOX .............................................................................. .................................................................. 8-8
BRAKES .......................................................................... ......................................................................... 8-8
REAR PTO ............................................................................................................................................... 8-8
FRONT PTO .................................................................... ......................................................................... 8-9
