CWEA E/I 2 Study Guide Quest
1. In a simple ratio gadget, the impartial variable is:
a. Each measured and managed.
B. Managed but now not measured.
C. Measured but no longer managed.
D. Neither measured nor managed. - ANS-c. Measured however no longer managed
1. Scheduling need to precede:
a. Planning.
B. Material procurement.
C. Workload balancing.
D. Process execution - ANS-d. Task execution
1. To pick the proper protection for a motor, you want to understand all the following besides the:
a. Ambient temperature.
B. Full-load present day score.
C. Service issue.
D. Time rating. - ANS-a. Ambient temperature
10. Local I/O expansion involves the addition of:
a. A 2d processor.
B. A shift sign in.
C. Information-managing skills.
D. I/O points within the rack. - ANS-d. I/O points in the rack.
Eleven. A essential purpose of problems in multi-layer revealed circuit boards is:
a. Age.
B. Corrosion.
C. Interlayer separation.
D. Overheating. - ANS-c. Interlayer separation
12. A software program problem that causes incorrect outcomes is called a:
a. Computer virus.
B. Crash.
C. Glitch.
D. Spike. - ANS-a. Trojan horse.
Thirteen. The CPU of a microcomputer is a(n):
a. ALU.
B. Microcontroller.
C. Microprocessor.
,D. Printed circuit meeting. - ANS-c. Microprocessor
14. Where is a pc's start-up application generally saved?
A. In RAM
b. In ROM
c. On disk
d. On magnetic tape - ANS-b. In ROM
15. How many signal situations can virtual I/O devices have?
A. One
b. Two
c. Eight
d. An infinite variety - ANS-b. Two
16. A CDU (Command and Display Unit) laptop display that senses finger strain is:
a. A digitizer.
B. An intelligent terminal.
C. A scanner.
D. A touch display. - ANS-d. A hint screen.
17. Which of the following is not a goal of a microprocessor-
primarily based engine manage system?
A. Better engine overall performance
b. Better fuel economic system
c. Lower exhaust emissions.
D. Lower noise emissions - ANS-d. Lower noise emissions
18. The RS232C popular applies to what type of digital statistics transmission?
A. Balanced
b. Fiber optic
c. Parallel
d. Serial - ANS-d. Serial
19. 10°C is same to what number of stages Fahrenheit?
A. 23.Three°F
b. 50°F
c. 75.6°F
d. - forty seven.6°F - ANS-b. 50°F
2. An on-off transfer with overload relays is referred to as a:
a. Magnetic manage.
B. Manual starter.
C. Reversing starter.
D. Aggregate starter - ANS-b. Guide starter
, 2. The root-suggest-rectangular approach is used to calculate:
a. Fundamental and derivative motion.
B. Proportional band or benefit.
C. Device accuracy.
D. Transducer bias - ANS-c. Device accuracy.
2. Which of the subsequent must you NOT do after giving your group commands?
A. Repeat key factors
b. Justify your instructions
c. Refuse to trade assignments
d. Seek in addition facts on a process - ANS-c. Refuse to trade assignments
20. What is the extent of a cylinder with a forty-foot diameter and peak of 23 feet?
A. 1,444 cu toes
b. 7,222 cu toes
c. 28,888 cu feet
d. 33,221 cu toes - ANS-c. 28,888 cu toes
21. One gallon of water weighs 8.34 kilos and one cubic foot incorporates 7.48 gallons of water.
A fish tank measures 36 inches lengthy, 24 inches huge and 20 inches excessive. How many
pounds of water will be within the fish tank?
A. Sixty four.Four lbs
b. 74.Eight lbs
c. 83.Four lbs
d. 624 lbs - ANS-d. 624 lbs
3. Hydraulic actuators:
a. Can produce very massive thrust.
B. Offer an indirect response to enter.
C. Require nearly no upkeep.
D. Usually use water as the fluid - ANS-a. Can produce very large thrust.
Three. The premiere way to get feedback is through:
a. A suggestion container.
B. The agency newsletter.
C. Asking questions.
D. All of the above - ANS-c. Asking questions.
Three. To simulate an RTD input, you operate a:
a. Digital VOM.
B. Potentiometer.
C. Resistance decade container.
D. Wally field - ANS-c. Resistance decade box.
1. In a simple ratio gadget, the impartial variable is:
a. Each measured and managed.
B. Managed but now not measured.
C. Measured but no longer managed.
D. Neither measured nor managed. - ANS-c. Measured however no longer managed
1. Scheduling need to precede:
a. Planning.
B. Material procurement.
C. Workload balancing.
D. Process execution - ANS-d. Task execution
1. To pick the proper protection for a motor, you want to understand all the following besides the:
a. Ambient temperature.
B. Full-load present day score.
C. Service issue.
D. Time rating. - ANS-a. Ambient temperature
10. Local I/O expansion involves the addition of:
a. A 2d processor.
B. A shift sign in.
C. Information-managing skills.
D. I/O points within the rack. - ANS-d. I/O points in the rack.
Eleven. A essential purpose of problems in multi-layer revealed circuit boards is:
a. Age.
B. Corrosion.
C. Interlayer separation.
D. Overheating. - ANS-c. Interlayer separation
12. A software program problem that causes incorrect outcomes is called a:
a. Computer virus.
B. Crash.
C. Glitch.
D. Spike. - ANS-a. Trojan horse.
Thirteen. The CPU of a microcomputer is a(n):
a. ALU.
B. Microcontroller.
C. Microprocessor.
,D. Printed circuit meeting. - ANS-c. Microprocessor
14. Where is a pc's start-up application generally saved?
A. In RAM
b. In ROM
c. On disk
d. On magnetic tape - ANS-b. In ROM
15. How many signal situations can virtual I/O devices have?
A. One
b. Two
c. Eight
d. An infinite variety - ANS-b. Two
16. A CDU (Command and Display Unit) laptop display that senses finger strain is:
a. A digitizer.
B. An intelligent terminal.
C. A scanner.
D. A touch display. - ANS-d. A hint screen.
17. Which of the following is not a goal of a microprocessor-
primarily based engine manage system?
A. Better engine overall performance
b. Better fuel economic system
c. Lower exhaust emissions.
D. Lower noise emissions - ANS-d. Lower noise emissions
18. The RS232C popular applies to what type of digital statistics transmission?
A. Balanced
b. Fiber optic
c. Parallel
d. Serial - ANS-d. Serial
19. 10°C is same to what number of stages Fahrenheit?
A. 23.Three°F
b. 50°F
c. 75.6°F
d. - forty seven.6°F - ANS-b. 50°F
2. An on-off transfer with overload relays is referred to as a:
a. Magnetic manage.
B. Manual starter.
C. Reversing starter.
D. Aggregate starter - ANS-b. Guide starter
, 2. The root-suggest-rectangular approach is used to calculate:
a. Fundamental and derivative motion.
B. Proportional band or benefit.
C. Device accuracy.
D. Transducer bias - ANS-c. Device accuracy.
2. Which of the subsequent must you NOT do after giving your group commands?
A. Repeat key factors
b. Justify your instructions
c. Refuse to trade assignments
d. Seek in addition facts on a process - ANS-c. Refuse to trade assignments
20. What is the extent of a cylinder with a forty-foot diameter and peak of 23 feet?
A. 1,444 cu toes
b. 7,222 cu toes
c. 28,888 cu feet
d. 33,221 cu toes - ANS-c. 28,888 cu toes
21. One gallon of water weighs 8.34 kilos and one cubic foot incorporates 7.48 gallons of water.
A fish tank measures 36 inches lengthy, 24 inches huge and 20 inches excessive. How many
pounds of water will be within the fish tank?
A. Sixty four.Four lbs
b. 74.Eight lbs
c. 83.Four lbs
d. 624 lbs - ANS-d. 624 lbs
3. Hydraulic actuators:
a. Can produce very massive thrust.
B. Offer an indirect response to enter.
C. Require nearly no upkeep.
D. Usually use water as the fluid - ANS-a. Can produce very large thrust.
Three. The premiere way to get feedback is through:
a. A suggestion container.
B. The agency newsletter.
C. Asking questions.
D. All of the above - ANS-c. Asking questions.
Three. To simulate an RTD input, you operate a:
a. Digital VOM.
B. Potentiometer.
C. Resistance decade container.
D. Wally field - ANS-c. Resistance decade box.
