Mechanical Technologist Grade 1 CWEA Certification Exam
Complete Questions and Verified Answers
1. What is an oxygen-acetylene torch?
Answer: A welding torch that uses fuel gas and oxygen to weld or cut metals
2. What does CMMS stand for?
Answer: Computerized Maintenance Management System
3. What does OMM stand for?
Answer: Operations and Maintenance Manual
4. What does SOP stand for?
Answer: Standard Operating Procedure
5. What does SCADA stand for?
Answer: Supervisory Control and Data Acquisition
6. What does SDS stand for?
Answer: SafetyData Sheet
,7. What does LOTO stand for?
Answer: Lock Out Tag Out
8. What does PPE stand for?
Answer: Personal Protective Equipment (PPE)
9. What are some examples of PPE?
Answer: Safety glasses,hardhat,gloves,earprotection,chemicalaprons, respirator, face shield,hazmat suit
10. What does HVAC stand for?
Answer: Heating,VentilationandAirConditioning
11. What is the definition of an engine?
Answer: Amachinedesignedtoconvertenergyintousefulmechanical motion
12. In terms of lubrication, what is required for a sealed ball bearing?
Answer: It does not need to be lubricated under normal use
13. What is the purpose of a breakaway switch?
Answer: To apply the breaks on a trailer in the event of a trailer release from a vehicle
14. What type of saw is used to cut metallic materials?
Answer: Hacksaw
15. What type of saw is used to cut intricate external shapes and interior cut-outs in
woodworking and carpentry?
,Answer: Acopingsaw
16. What type of saw is used to cut wood perpendicular to (across) the wood grain?
Answer: A Crosscut saw
17. What type of saw is used to cut wood in the direction of the grain?
Answer: Aripsaw
18. Ascale on a blueprint indicates 1" = 2". What does this scale mean?
Answer: Eachlineon the blueprint is shown as half of its actual size
19. A computerized maintenance management system (CMMS) is a type of ....
Answer: -
tool
20. What problems may occur when a person works in a very hot area for a
prolonged period of time?
Answer: Heat stroke, Cramps, Exhaustion
21. What is the purpose of a confined space safety permit?
Answer: Itensures the use ofsafety precautions and use of standard safety procedures when working in a confined
space
, 22. Why must preventative maintenance tasks be documented?
Answer: Records are needed to show the type and frequency of maintenance of operating units and to evaluate the
ettectiveness of maintenance programs
23. True or False
Answer: When accepting a work order, the need for speedy completion is an integral
aspect of Your performance as a Maintainenance Technologist
Answer: - FALSE
Answer: It does not matter how long it takes to complete a work order, the most important and integral aspect of your performance
when completing a work order is doing it safely and compleately
24. There is an 18" wide red stripe painted on the ground around a tank. The tank is 25'
high and 150' in diameter. What is the perimeter on the outer edge of thestripe?
Answer: 475.71ft
18" = 1.5'
Perimeter = Diameter * pi= (150' + 1.5')* 3.14= 475.71
25. A 12" diameter pipe, 48' long, weighs 35lbs per linear ft. What is the weight of the
totalload?
Answer: 1680lbs/ft
Complete Questions and Verified Answers
1. What is an oxygen-acetylene torch?
Answer: A welding torch that uses fuel gas and oxygen to weld or cut metals
2. What does CMMS stand for?
Answer: Computerized Maintenance Management System
3. What does OMM stand for?
Answer: Operations and Maintenance Manual
4. What does SOP stand for?
Answer: Standard Operating Procedure
5. What does SCADA stand for?
Answer: Supervisory Control and Data Acquisition
6. What does SDS stand for?
Answer: SafetyData Sheet
,7. What does LOTO stand for?
Answer: Lock Out Tag Out
8. What does PPE stand for?
Answer: Personal Protective Equipment (PPE)
9. What are some examples of PPE?
Answer: Safety glasses,hardhat,gloves,earprotection,chemicalaprons, respirator, face shield,hazmat suit
10. What does HVAC stand for?
Answer: Heating,VentilationandAirConditioning
11. What is the definition of an engine?
Answer: Amachinedesignedtoconvertenergyintousefulmechanical motion
12. In terms of lubrication, what is required for a sealed ball bearing?
Answer: It does not need to be lubricated under normal use
13. What is the purpose of a breakaway switch?
Answer: To apply the breaks on a trailer in the event of a trailer release from a vehicle
14. What type of saw is used to cut metallic materials?
Answer: Hacksaw
15. What type of saw is used to cut intricate external shapes and interior cut-outs in
woodworking and carpentry?
,Answer: Acopingsaw
16. What type of saw is used to cut wood perpendicular to (across) the wood grain?
Answer: A Crosscut saw
17. What type of saw is used to cut wood in the direction of the grain?
Answer: Aripsaw
18. Ascale on a blueprint indicates 1" = 2". What does this scale mean?
Answer: Eachlineon the blueprint is shown as half of its actual size
19. A computerized maintenance management system (CMMS) is a type of ....
Answer: -
tool
20. What problems may occur when a person works in a very hot area for a
prolonged period of time?
Answer: Heat stroke, Cramps, Exhaustion
21. What is the purpose of a confined space safety permit?
Answer: Itensures the use ofsafety precautions and use of standard safety procedures when working in a confined
space
, 22. Why must preventative maintenance tasks be documented?
Answer: Records are needed to show the type and frequency of maintenance of operating units and to evaluate the
ettectiveness of maintenance programs
23. True or False
Answer: When accepting a work order, the need for speedy completion is an integral
aspect of Your performance as a Maintainenance Technologist
Answer: - FALSE
Answer: It does not matter how long it takes to complete a work order, the most important and integral aspect of your performance
when completing a work order is doing it safely and compleately
24. There is an 18" wide red stripe painted on the ground around a tank. The tank is 25'
high and 150' in diameter. What is the perimeter on the outer edge of thestripe?
Answer: 475.71ft
18" = 1.5'
Perimeter = Diameter * pi= (150' + 1.5')* 3.14= 475.71
25. A 12" diameter pipe, 48' long, weighs 35lbs per linear ft. What is the weight of the
totalload?
Answer: 1680lbs/ft
