GENERAL SHOP SAFETY TEST
VERIFIED QUESTIONS WITH 100%
CORRECT ANSWERS
\.______________ should be worn on the eyes at all times. - ANSWERS✔-Eye
protection
\.Care must be taken to see that all lumber is free of nails, dirt, or loose knots
before being machined. - ANSWERS✔-True
\.When in doubt about how to use a machine, _______________ the instructor. -
ANSWERS✔-consult
\.Never ________________ another student while they are using a tool or a
machine. - ANSWERS✔-distract
\.You must have ______________ before using any machines. - ANSWERS✔-
permission
\.Students may use machines only when the instructor is _______________. If the
instructor has to leave the room, all machines must be turned off until he/she
returns. - ANSWERS✔-present
, \.All power cords must be checked... - ANSWERS✔-before using it each time; for
bent or broken plug prongs; for worn, frayed, damaged wires.
\.When should you remove a scrap piece of wood from any machine? -
ANSWERS✔-When the machine is off and the blade has come to a complete stop.
\.Oily and/or greasy rags should be placed... - ANSWERS✔-in a metal container
\.Everyone must _____________ up 7 minutes before the bell rings. If you do not
clean your assigned area sufficiently, no one will leave until it is clean. And your
weekly grade will be affected. - ANSWERS✔-clean
\.If something goes wrong with a machine while using it, you should _________
__________ (2 words) the power and report it to the instructor. - ANSWERS✔-
turn off
\.When working in the shop, all loose, baggy clothing, ties, jewelry, hair, and other
hanging objects should be: - ANSWERS✔-tucked in, tied back, or removed
\.All special machine set-ups must never be done alone and: - ANSWERS✔-
approved and checked by the instructor
\.All injuries and accidents, no matter how small, must be reported to the
instructor because: - ANSWERS✔-even a small scratch or cut can become infected
unless properly cared for
VERIFIED QUESTIONS WITH 100%
CORRECT ANSWERS
\.______________ should be worn on the eyes at all times. - ANSWERS✔-Eye
protection
\.Care must be taken to see that all lumber is free of nails, dirt, or loose knots
before being machined. - ANSWERS✔-True
\.When in doubt about how to use a machine, _______________ the instructor. -
ANSWERS✔-consult
\.Never ________________ another student while they are using a tool or a
machine. - ANSWERS✔-distract
\.You must have ______________ before using any machines. - ANSWERS✔-
permission
\.Students may use machines only when the instructor is _______________. If the
instructor has to leave the room, all machines must be turned off until he/she
returns. - ANSWERS✔-present
, \.All power cords must be checked... - ANSWERS✔-before using it each time; for
bent or broken plug prongs; for worn, frayed, damaged wires.
\.When should you remove a scrap piece of wood from any machine? -
ANSWERS✔-When the machine is off and the blade has come to a complete stop.
\.Oily and/or greasy rags should be placed... - ANSWERS✔-in a metal container
\.Everyone must _____________ up 7 minutes before the bell rings. If you do not
clean your assigned area sufficiently, no one will leave until it is clean. And your
weekly grade will be affected. - ANSWERS✔-clean
\.If something goes wrong with a machine while using it, you should _________
__________ (2 words) the power and report it to the instructor. - ANSWERS✔-
turn off
\.When working in the shop, all loose, baggy clothing, ties, jewelry, hair, and other
hanging objects should be: - ANSWERS✔-tucked in, tied back, or removed
\.All special machine set-ups must never be done alone and: - ANSWERS✔-
approved and checked by the instructor
\.All injuries and accidents, no matter how small, must be reported to the
instructor because: - ANSWERS✔-even a small scratch or cut can become infected
unless properly cared for
