SOS Mechanic Certification- Suspension & steering Exam| Questions and correct answers| New 2026

SOS Mechanic Certification- Suspension & steering Exam| Questions and correct answers| New 2026 Bleeding a power steering unit is generally done by turning the steering wheel left and right repeatedly After rounding a turn, the front wheels do not return to the straight ahead position in a normal way. What adjustment is most likely to be out of specifications? Caster "Toe" adjustment on front wheel drive vehicles is made by: changing he length of the steering linkage When performing a front-end alignment what should you do before you adjust the toe setting? adjust the caster & camber Front-wheel toe-in adjustment on rear-wheel drive vehicles is made by: changing the length of the steering linkage A mechanic is going to adjust the curb height on a car with torsion bars. To do this the car should be checked: on a level surface with the car at curb weight A proper way to check ball joints for wear is by: visual observation of the wear indicator & unloading the ball joint and using a pry bar and a dial indicator which of the following adjustments can be made on all vehicles with MacPherson strut suspensions? Toe settings You are checking the war on ball joints with a dial indicator at the wheel rim. What must you do to get accurate readings? check the wheel bearing adjustment and correct if needed A mechanic jacks up a car, stands facing it, places a hand on the front of each tire. The mechanic pushes out and then pulls in on both tires. Too much movement would most likely mean that: