OSHA 30 CONSTRUCTION FINAL EXAM
NEWEST 2026 ACTUAL EXAM QUESTIONS AND
CORRECT DETAILED ANSWERS (VERIFIED
ANSWERS) ALL ANSWERED {330 Q & A}
ALREADY GRADED A+ | GUARANTEED PASS
Which of the following is a basic element of a roof fall protection
program - ✔✔✔ Correct Answer > Both A and C (limiting and training)
According to OSHA, a fall hazard exists whenever workers who
load and unload trucks must climb onto trailers, materials, or
equipment and their feet are above ____ from the lower level or
ground - ✔✔✔ Correct Answer > 6 ft
You are at a higher risk for falling if your portable ladder is - ✔✔✔
Correct Answer > Not inspected
Which of the follow is a frequently cited OSHA violation of safe
ladder use - ✔✔✔ Correct Answer > All of the above
,Page 2 of 50
OSHA requires fall protection when working near the edge of a
trench or an excavation that is ___ or more in depth - ✔✔✔ Correct
Answer > 6 ft
Which of the following is an engineering control that is installed
to mitigate fall hazards - ✔✔✔ Correct Answer > All of the above
(guardrails, wall, parapets, etc.)
Fall restraint systems must meet which of the following - ✔✔✔
Correct Answer > All of the above (designed by qualified, 3,000lbs,
prevent free fall)
If there are defects found during the inspection of personal fall
protection equipment, or if the equipment has been used in an
arrest, it must be - ✔✔✔ Correct Answer > Removed immediately
Personal fall arrest snap hooks must be locking and be - ✔✔✔
Correct Answer > Designed to prevent opening and slipping off the
connector
Personal fall arrest system connectors must be compatible and
capable of supporting - ✔✔✔ Correct Answer > 5,000lbs
,Page 3 of 50
Horizontal lifelines shall be designed, installed and used under
supervision of an ___ as part of a complete personal fall arrest
system, which maintains a safety factor of at least two - ✔✔✔
Correct Answer > Qualified person
Every supported scaffold and its components must support,
without failure, its own weight and at least _____ the intended
load - ✔✔✔ Correct Answer > 4 times
When using scaffols make sure there is - ✔✔✔ Correct Answer > All of
the above ( safe access and egress, full planking, stable footing,
fall protection)
The guardrails on suspended scaffolds manufactured after the
year 2000 must be ____ with mid-rails installed approximately
halfway between the top-rail and the platform surface - ✔✔✔
Correct Answer > 38 and 45 inches high
Supported scaffolds must be inspected for - ✔✔✔ Correct Answer >
Both B and C (visible bends, cracks, proper planking, toe-boards,
etc.)
planks that are 12 feet long on a suspended scaffold must extend
beyond supports - ✔✔✔ Correct Answer > at least 6 inches but no
more than 18 inches
, Page 4 of 50
a person who must select and direct employees who erect,
dismantle, move or alter scaffolds and who must inspect
scaffolding to ensure compliant is called a - ✔✔✔ Correct Answer >
Competent person
Scaffold user training must include - ✔✔✔ Correct Answer > Hazards
involved and intended load
With respect to anchorage points, employers must - ✔✔✔ Correct
Answer > All of the above
A guardrail system or PFAS is required for scaffolds more than -
✔✔✔ Correct Answer > 10 ft
Retractable lanyards are often the first choice for a fall
protection lanyard. Why - ✔✔✔ Correct Answer > They limit free fall
distance to 2ft or less by their fall sensing design
Horizontal lifelines shall be designed, installed, and used under
the supervision of a qualified person as part of a complete
personal fall arrest system, which maintains a safety factor of
____ - ✔✔✔ Correct Answer > at least 2x max load