A cylindrical aluminum tank is 12 ft high. The flat 1978 lbs.
tank top and bottom have a diameter of 6ft. The
3 multiple choice options
tank walls are 1/2 inch thick. Calculate the
approximate tank weight.
What is the coefficient of friction (CF) for moving .1
metal against concrete?
3 multiple choice options
A rigging block is attached to a 4,500 lb load. If 4 1125 lbs
parts of line are used with the block (neglect
3 multiple choice options
friction), what is the minimum amount of line pull
required to lift the 4,500 lb load?
According to ASME B30.10, the maximum hook 5% of its original opening
throat opening must not exceed ?
3 multiple choice options
Based on the information below, what is the 5/8"
minimum size chain sling needed? 4 leg- 3 multiple choice options
bridleLegs at 60 degreesGrade 80Load Weight =
35,492 lbs
When inspecting a custom designed lifting Working Load Limit, serial number, weight (if over 100 lbs.),
accessory, the following markings should be manufacturer name and contact information.
readily identifiable on the device. 3 multiple choice options
, A cylindrical steel tank is 10ft high. The flat tank top 7,348 lbs
and bottom have a diameter of 6 ft. The tank walls 3 multiple choice options
are 3/4 inch thick. Calculate the approximate tank
weight.
A steel plate is 30 ft. long, 27 inches wide, and 1/4 675 lbs
inch thick. Calculate the weight of the plate. 3 multiple choice options
According to ASME B30.20, the markings on a 100 lbs
Below-the-Hook Lifting device shall show its
3 multiple choice options
weight if over?
A square steel tube is 30 ft long. The tube is 6 ft. 21,600 lbs
tall x 6 ft. wide, and the tube wall thickness is 3/4 3 multiple choice options
inch. Calculate the approximate weight of the
square steel tube
Who appoints the signalperson? Lift Director
3 multiple choice options
What types of inspections are required for Below- All of the above
the-Hook devices in ASME B30.20? 3 multiple choice options
tank top and bottom have a diameter of 6ft. The
3 multiple choice options
tank walls are 1/2 inch thick. Calculate the
approximate tank weight.
What is the coefficient of friction (CF) for moving .1
metal against concrete?
3 multiple choice options
A rigging block is attached to a 4,500 lb load. If 4 1125 lbs
parts of line are used with the block (neglect
3 multiple choice options
friction), what is the minimum amount of line pull
required to lift the 4,500 lb load?
According to ASME B30.10, the maximum hook 5% of its original opening
throat opening must not exceed ?
3 multiple choice options
Based on the information below, what is the 5/8"
minimum size chain sling needed? 4 leg- 3 multiple choice options
bridleLegs at 60 degreesGrade 80Load Weight =
35,492 lbs
When inspecting a custom designed lifting Working Load Limit, serial number, weight (if over 100 lbs.),
accessory, the following markings should be manufacturer name and contact information.
readily identifiable on the device. 3 multiple choice options
, A cylindrical steel tank is 10ft high. The flat tank top 7,348 lbs
and bottom have a diameter of 6 ft. The tank walls 3 multiple choice options
are 3/4 inch thick. Calculate the approximate tank
weight.
A steel plate is 30 ft. long, 27 inches wide, and 1/4 675 lbs
inch thick. Calculate the weight of the plate. 3 multiple choice options
According to ASME B30.20, the markings on a 100 lbs
Below-the-Hook Lifting device shall show its
3 multiple choice options
weight if over?
A square steel tube is 30 ft long. The tube is 6 ft. 21,600 lbs
tall x 6 ft. wide, and the tube wall thickness is 3/4 3 multiple choice options
inch. Calculate the approximate weight of the
square steel tube
Who appoints the signalperson? Lift Director
3 multiple choice options
What types of inspections are required for Below- All of the above
the-Hook devices in ASME B30.20? 3 multiple choice options
