BCTC Industrial Maintenance EXAM COVERAGE
Technology AMTEC (NOCTI
Mechatronic)
BCTC Industrial Maintenance Technology -
AMTEC (NOCTI Mechatronic)
Workplace Safety & OSHA (lock‑out/tag‑out,
PPE, hazard communication)
Basic maintenance terminology and practices
Mechanical systems: bearings, couplings,
brakes/clutches, pumps, alignment
Fluid power systems: hydraulics and pneumatics
Electrical fundamentals and motor controls
Schematic & blueprint reading (interpretation of
diagrams)
PLC principles and basic logic (PLC
wiring/troubleshooting)
Electronics basics (Ohm's law, circuits, symbols)
Instruments & measurement tools use and care
General predictive/preventive maintenance
techniques
Robotics/controls & instrumentation (industry
automation concepts)
Computer literacy as applied to maintenance
tasks
Mechanical drive/power transmission
components
, Troubleshooting and system diagnostics
fundamentals
This type of drawing represents a Orthographic
three-dimensional object using
several two-dimensional views of
the object.
What does OSHA stand for? Occupational Safety & Health Administration
A _________ fire extinguisher should Class C
be used on an electrical fire.
Trouble breathing
If you inhale phenolic fumes what
would happen to you?
What are linear dimensions usually Decimal or Fractional Units
expressed in?
What does a filled triangle Hydraulic Flow
represent in a fluid power
diagram?
,What can happen if bolts and nuts They wear out quickly and can cause failure.
are not properly torqued?
What safety practice is used to Lockout/Tagout
prevent equipment from being
energized?
A Safety Data Sheet (SDS) provides Handling and Storage
information about first aid
measures, stability and reactivity,
and _____?
Which of the following is not true Format is the same from company to company.
of a title block?
A NFPA 70E is a regulation that Electrical safety
provides guidelines and details for
___________?
GFCI devices are used for what To prevent a person from being electrocuted.
purpose?
A person with serious electrical They are in immediate danger
injury should be moved only when
_______.
, What must be provided by Safety Data Sheet (SDS).
chemical manufacturers,
distributors, and importers to
anyone who will work with these
potentially dangerous materials?
You come across a fellow Shut off the circuit.
employee who is being
electrocuted by becoming
attached to a live electrical circuit,
what is the first thing you should
do?
What would slippery floors and Physical hazards.
cluttered walkways be considered
in the workplace?
What tool is used to measure the Torque Wrench
turning force when tightening a
fastener?
When working on an electrical, LOTO
fluid power, or mechanical system
a ____ procedure should be
performed to lock out the energy.
Technology AMTEC (NOCTI
Mechatronic)
BCTC Industrial Maintenance Technology -
AMTEC (NOCTI Mechatronic)
Workplace Safety & OSHA (lock‑out/tag‑out,
PPE, hazard communication)
Basic maintenance terminology and practices
Mechanical systems: bearings, couplings,
brakes/clutches, pumps, alignment
Fluid power systems: hydraulics and pneumatics
Electrical fundamentals and motor controls
Schematic & blueprint reading (interpretation of
diagrams)
PLC principles and basic logic (PLC
wiring/troubleshooting)
Electronics basics (Ohm's law, circuits, symbols)
Instruments & measurement tools use and care
General predictive/preventive maintenance
techniques
Robotics/controls & instrumentation (industry
automation concepts)
Computer literacy as applied to maintenance
tasks
Mechanical drive/power transmission
components
, Troubleshooting and system diagnostics
fundamentals
This type of drawing represents a Orthographic
three-dimensional object using
several two-dimensional views of
the object.
What does OSHA stand for? Occupational Safety & Health Administration
A _________ fire extinguisher should Class C
be used on an electrical fire.
Trouble breathing
If you inhale phenolic fumes what
would happen to you?
What are linear dimensions usually Decimal or Fractional Units
expressed in?
What does a filled triangle Hydraulic Flow
represent in a fluid power
diagram?
,What can happen if bolts and nuts They wear out quickly and can cause failure.
are not properly torqued?
What safety practice is used to Lockout/Tagout
prevent equipment from being
energized?
A Safety Data Sheet (SDS) provides Handling and Storage
information about first aid
measures, stability and reactivity,
and _____?
Which of the following is not true Format is the same from company to company.
of a title block?
A NFPA 70E is a regulation that Electrical safety
provides guidelines and details for
___________?
GFCI devices are used for what To prevent a person from being electrocuted.
purpose?
A person with serious electrical They are in immediate danger
injury should be moved only when
_______.
, What must be provided by Safety Data Sheet (SDS).
chemical manufacturers,
distributors, and importers to
anyone who will work with these
potentially dangerous materials?
You come across a fellow Shut off the circuit.
employee who is being
electrocuted by becoming
attached to a live electrical circuit,
what is the first thing you should
do?
What would slippery floors and Physical hazards.
cluttered walkways be considered
in the workplace?
What tool is used to measure the Torque Wrench
turning force when tightening a
fastener?
When working on an electrical, LOTO
fluid power, or mechanical system
a ____ procedure should be
performed to lock out the energy.
