IICRC TRAUMA AND CRIME SCENE CLEANUP TEST
PREP WITH COMPLETE 200 REAL EXAM QUESTIONS
AND CORRECT VERIFIED ANSWERS/ ALREADY
GRADED A+ (BRAND NEW!!)
What do the letters "EPA" stand for? - ANSWER - Environmental
Protection Agency
According to the EPA, the states are to regulate what part of trauma
scene work: - ANSWER - disposal/ handling
The overriding regulation in Canada is Bill C-45, which is also known
as: - ANSWER - Canadian Due Diligence Law
What does TDG stand for? - ANSWER - Transportation of Dangerous
Goods
The regulations that cover packaging of biomedical waste are known by
the letters WHMIS. What does WHMIS stand for? - ANSWER -
Workplace Hazardous Materials Information System
Under WHMIS, what are the "three rights to know"? - ANSWER - 1.
What hazards are potential threats in the workplace,
2. To participate/work on organizations health and safety,
pg. 1
,3. To refuse to do anything workers consider unsafe.
An independent provincial statutory agency promotes workplace health
and safety for the workers and employers in British Colombia, but is
also applicable to all of Canada based on the wording of Bill C-45. This
agency is known as: - ANSWER - Work Safe BC
Workers and employees who face potential exposure to blood or items
that were in contact with blood should be offered the appropriate
_____________ by the employer. - ANSWER - Immunizations
Biohazardous waste should be stored in properly marked ________ for
disposal at an approved site. - ANSWER - Containers
Sharp objects that are contaminated should be wrapped for protection
from cutting through the disposal ____________. This container is
______ appropriately and disposed of properly. - ANSWER - Container,
marked
Sharp objects with contamination should be cleaned and treated with a
______ to inhibit or kill the growth of infectious microorganisms. -
ANSWER - Biocide
3 areas of technician training are: - ANSWER - 1:safety practices
2:psychological issues
pg. 2
,3:cleaning, decontamination, and odor control
Safety recommendations establish a hierarchy of safety controls. The
most preferred control at the top of the hierarchy is ________ of the
hazard. - ANSWER - Elimination
When elimination and substitution are not feasible, the net three safety
controls are: - ANSWER - Engineering controls, administrative controls,
and PPE
PPE is used to protect an employees body from all ________, such as
inhalation of or skin contact with microorganisms. - ANSWER -
potential exposures
When cleaning a putrefaction site, proper respiratory protection will
include full face respirator with a ______ filter cartridge and _________
vapor cartridge. - ANSWER - HEPA, organic
The effectiveness of respirators is expressed by an _____________
(________) - ANSWER - assigned protection factor (apf)
Respiratory protection regulations state that the employer must provide:
- ANSWER - medical evaluations, fit testing, and proper training
What does donning mean? - ANSWER - Putting on PPE
pg. 3
, what does doffing mean? - ANSWER - Taking off PPE
2 two major additional issues that arise at a putrefaction site are -
ANSWER - odor and insects
The first step in controlling malodors is - ANSWER - source removal
during demolition technician should cut beyond the visible contaminated
portion of porous structural materials by at least - ANSWER - 6 inches
removing building materials that are regulated such as asbestos or lead
based paint especially in demolition of older structures requires
compliance with ________ regulations - ANSWER - local state
provincial federal
technician should follow the national air duct cleaners association
standard of care _____ 2013 for cleanup and remediation work -
ANSWER - ACR
remove and discard vehicle carpets when blood or OPIM has penetrated
to the _______ materials or seat _____ - ANSWER - cushion fabric
backing
pg. 4