TELECOM TOWER TECHNICIAN EXAM 1
VERSION 1 2026/2027 WITH ACTUAL
CORRECT QUESTIONS AND VERIFIED
DETAILED ANSWERS |CURRENTLY TESTING
QUESTIONS AND SOLUTIONS|ALREADY
GRADED A+|NEWEST |BRAND NEW
VERSION|JUST RELEASED!!
What motion indicates lower the load?
Point index finger towards ground and make a circling motion with that finger
A hoist should be able to withstand a minimum of __________
the maximum intended line pull
1.5 times
The operator and signal person should be familiar with what?
Vernacular used in the industry, industry hand signals, and industry standards
Where OSHA has not yet promulgated specific regulations, who is responsible for ensuring the
acts general clause is followed?
Employer
All rigging equipment should be inspected daily before use
True
On a job site, who should be involved in the JHA process?
The Whole Crew
The person operating the capstan will need a clear view of what?
1|Page
, The load and signal person
All cranes must be inspected _________ by a competent person
before use
Daily
Work boots with ankle support are recommended for all work
sites
True
What are some of the working parts of a hoist?
Hydronic pump, motor, and control levers
What term is used to describe rules written by the department of labor?
Standards
In a high vehicle traffic area where work is taking place, the following should occur.
Use a designated signal person with a high visibility vest to control traffic
A vertical lifeline shall have a minimum breaking strength of
_______ lbs.
5000
According to the applicable industry standards, what is the minimum height from a lower
surface or ground where fall protection must be used?
6 feet
According to the regulations and standards, there are two levels of maximum permissible
exposure. Which group is allowed at the highest level of exposure?
Industry Workers
Some symptoms of overexposure to RF include:
2|Page
VERSION 1 2026/2027 WITH ACTUAL
CORRECT QUESTIONS AND VERIFIED
DETAILED ANSWERS |CURRENTLY TESTING
QUESTIONS AND SOLUTIONS|ALREADY
GRADED A+|NEWEST |BRAND NEW
VERSION|JUST RELEASED!!
What motion indicates lower the load?
Point index finger towards ground and make a circling motion with that finger
A hoist should be able to withstand a minimum of __________
the maximum intended line pull
1.5 times
The operator and signal person should be familiar with what?
Vernacular used in the industry, industry hand signals, and industry standards
Where OSHA has not yet promulgated specific regulations, who is responsible for ensuring the
acts general clause is followed?
Employer
All rigging equipment should be inspected daily before use
True
On a job site, who should be involved in the JHA process?
The Whole Crew
The person operating the capstan will need a clear view of what?
1|Page
, The load and signal person
All cranes must be inspected _________ by a competent person
before use
Daily
Work boots with ankle support are recommended for all work
sites
True
What are some of the working parts of a hoist?
Hydronic pump, motor, and control levers
What term is used to describe rules written by the department of labor?
Standards
In a high vehicle traffic area where work is taking place, the following should occur.
Use a designated signal person with a high visibility vest to control traffic
A vertical lifeline shall have a minimum breaking strength of
_______ lbs.
5000
According to the applicable industry standards, what is the minimum height from a lower
surface or ground where fall protection must be used?
6 feet
According to the regulations and standards, there are two levels of maximum permissible
exposure. Which group is allowed at the highest level of exposure?
Industry Workers
Some symptoms of overexposure to RF include:
2|Page
