SB2334E04
Operation &
Maintenance Manual
SKID STEER LOADER
440 Plus
460 Series
470 Plus
0510
, WARNING
Do not start, operate or service this machine unless you have read and understood these instructions
and received proper training.
Unsafe or improper use of the machine may cause serious injury or death.
Operators and maintenance personnel must read this manual and receive training before operating or
maintaining the machine.
This manual should be kept with the machine for reference and periodically reviewed by the machine
operator and by all personnel who will come into contact with it.
The following warning is provided pursuant to California Health & Safety Code Sections 25247.5
et, seq,
WARNING
California Proposition 65
Engine Exhaust, some of its constituents, and certain vehicle components contain or emit chemicals
known to the State of California to cause cancer birth defects of other reproductive harm.
Battery posts, terminals and related accessories contain lead and lead compounds, chemicals known
to the State of California to cause cancer and birth defects or other reproductive harm.
WASH HANDS AFTER HANDLING.
, FOREWORD
• This manual explains the safety rules, lubrication, testing and controls to operate and maintain the DOOSAN Skid
Steer Loader for safe and optimal performance.
• The operator should be familiar with all of the contents of this manual before starting the vehicle to insure maxi-
mum performance, safety and economy.
• Descriptions explain the testing, starting, operation, and stop procedures in detail.
• To maintain the vehicle in top condition, the operator should periodically check the vehicle in accordance with the
service schedule.
• The periodic maintenance intervals in this manual are based on the service hour meter.
Environment Management
Note that DOOSAN Infracore is ISO 14001 certified which is harmonized with ISO 9001 Periodic ENVIRONMEN-
TAL AUDITS & ENVIRONMENTAL PERFORMANCE EVALUATIONS have been made by internal and external
inspection entities. LIFE - CYCLE ANALYSIS has also been made through out the total product life. ENVIRON-
MENT MANAGEMENT SYSTEM includes DESIGN FOR ENVIRONMENT from the initial stage of the design.
ENVIRONMENT MANAGEMENT SYSTEM considers environmental laws & regulations, reduction or elimination of
resource consumption as well as environmental emission or pollution from industrial activities, energy saving, envi-
ronment - friendly product design(lower noise, vibration, emission, smoke, heavy metal free, ozone depleting sub-
stance free, etc.), recycling, material cost reduction, and even environmentally oriented education for the employee.
S-1
, SAFETY INFORMATION
This is the safety-alert symbol.
When you see this symbol on your machine
or in this manual, be alert to the
potential for personal injury.
Follow recommended precautions and
safe operating practices
HA0OA00I
S-2
Operation &
Maintenance Manual
SKID STEER LOADER
440 Plus
460 Series
470 Plus
0510
, WARNING
Do not start, operate or service this machine unless you have read and understood these instructions
and received proper training.
Unsafe or improper use of the machine may cause serious injury or death.
Operators and maintenance personnel must read this manual and receive training before operating or
maintaining the machine.
This manual should be kept with the machine for reference and periodically reviewed by the machine
operator and by all personnel who will come into contact with it.
The following warning is provided pursuant to California Health & Safety Code Sections 25247.5
et, seq,
WARNING
California Proposition 65
Engine Exhaust, some of its constituents, and certain vehicle components contain or emit chemicals
known to the State of California to cause cancer birth defects of other reproductive harm.
Battery posts, terminals and related accessories contain lead and lead compounds, chemicals known
to the State of California to cause cancer and birth defects or other reproductive harm.
WASH HANDS AFTER HANDLING.
, FOREWORD
• This manual explains the safety rules, lubrication, testing and controls to operate and maintain the DOOSAN Skid
Steer Loader for safe and optimal performance.
• The operator should be familiar with all of the contents of this manual before starting the vehicle to insure maxi-
mum performance, safety and economy.
• Descriptions explain the testing, starting, operation, and stop procedures in detail.
• To maintain the vehicle in top condition, the operator should periodically check the vehicle in accordance with the
service schedule.
• The periodic maintenance intervals in this manual are based on the service hour meter.
Environment Management
Note that DOOSAN Infracore is ISO 14001 certified which is harmonized with ISO 9001 Periodic ENVIRONMEN-
TAL AUDITS & ENVIRONMENTAL PERFORMANCE EVALUATIONS have been made by internal and external
inspection entities. LIFE - CYCLE ANALYSIS has also been made through out the total product life. ENVIRON-
MENT MANAGEMENT SYSTEM includes DESIGN FOR ENVIRONMENT from the initial stage of the design.
ENVIRONMENT MANAGEMENT SYSTEM considers environmental laws & regulations, reduction or elimination of
resource consumption as well as environmental emission or pollution from industrial activities, energy saving, envi-
ronment - friendly product design(lower noise, vibration, emission, smoke, heavy metal free, ozone depleting sub-
stance free, etc.), recycling, material cost reduction, and even environmentally oriented education for the employee.
S-1
, SAFETY INFORMATION
This is the safety-alert symbol.
When you see this symbol on your machine
or in this manual, be alert to the
potential for personal injury.
Follow recommended precautions and
safe operating practices
HA0OA00I
S-2
