TCFP DRIVER PRACTICE ASSESSMENT 2026
CERTIFICATION EVALUATION EXPERT
CHECKED
◉ 300 Gallons ( 1135 L) Answer: An apparatus must carry a
minimum of _______________ of water to be classified as a pumper.
◉ 400 Ft (120 m) Answer: According to NFPA 1901, what is the
minimum amount of attack hose to be carried on a pumper?
◉ Initial attack fire apparatus Answer: The _____________ is usually
equipped with four-wheel drive and used to fight fires in urban and
rural settings.
◉ 750 gallons (2840 L) Answer: According to NFPA 1901, a pumper
should be equipped with permanently mounted pump at a minimum
rating of __________ of water per minute.
◉ Attic Ladder Answer: Which of the following is one type of ground
ladder that must be installed by manufacturer for an apparatus to be
classified as an aerial apparatus in accordance with NFPA 1901?
,◉ Special service Answer: A hazardous materials apparatus or a
heavy technical rescue apparatus would be considered a
___________________ fire apparatus.
◉ Initial attack fire apparatus Answer: Which type of apparatus is
used to respond to small incidents such as dumpster fires, vehicle
fires, and brush fires in urban settings?
◉ The jurisdiction purchasing the fire apparatus Answer: Who is
ultimately responsible for conducting ongoing training to ensure
proficiency with regard to the safe and proper use of the fire
apparatus and its equipment?
◉ 85 ft (26-m) Answer: NFPA 1901 states that the quint shall be
equipped with a minimum total complement of _____________ of
ground ladders.
◉ 1000 gallons (4000 L) Answer: A mobile water supply apparatus
is equipped with one or more water tanks that meet the
requirements of NFPA 1901 and have a minimum certified capacity
of:
◉ 400 ft (120 m) Answer: According to NFPA 1901, what is the
minimum amount of attack hose to be carried on an initial attack fire
apparatus?
,◉ water tower Answer: Aerial fir apparatus can be configured in
numerous different classifications including aerial ladder, elevating
platform or:
◉ The specific performance requirements Answer: What is one of
the three things that a jurisdiction must convey to the manufacturer
when purchasing a fire apparatus?
◉ Hazardous Materials Answer: Which of the following fire
apparatus would be an example of a special service fire apparatus?
◉ Miscellaneous Answer: _____________________ equipment includes
portable tools and equipment carried on an apparatus, not including
hose, ladders, fixed power sources, reels, breathing air systems, or
other major equipment or components specified by the purchaser to
be permanently mounted on the apparatus as received from the
apparatus manufacturer.
◉ 2 Answer: In order for a fire apparatus to be classified as a
"quint". It must carry a minimum of ___________ combination spray
nozzles capable of flowing 95 GPM (360 L/Min)
◉ Full lift, extension and 90 degree rotation are all examples of what
type of apparatus tests? Answer: Aerial device inspection
, ◉ The _________________ system keeps a vehicle's axles in place and
holds up the fire apparatus and its entire load. Answer: suspension
◉ Fire apparatus and equipment should be inspected at least:
Answer: weekly
◉ Often, fire apparatus inspections are broken into sections.
According to the text, what is the first section that should be
completed? Answer: Exterior inspection
◉ An internal valve in a multistage pump that enables the user to
change the mode of operation to either series/ pressure or parallel/
volume. Answer: Transfer valve
◉ A system used inside the fire apparatus bay that connects to the
fire apparatus tailpipe and draws its exhaust outside the building.
Answer: Extractor exhaust system
◉ An evaluation of the fire apparatus and its equipment that is
intended to ensure its safe operation. Answer: Fire apparatus
inspection
◉ Making sure the fire apparatus is in proper working condition, the
emergency warning equipment is operating correctly, tools and
CERTIFICATION EVALUATION EXPERT
CHECKED
◉ 300 Gallons ( 1135 L) Answer: An apparatus must carry a
minimum of _______________ of water to be classified as a pumper.
◉ 400 Ft (120 m) Answer: According to NFPA 1901, what is the
minimum amount of attack hose to be carried on a pumper?
◉ Initial attack fire apparatus Answer: The _____________ is usually
equipped with four-wheel drive and used to fight fires in urban and
rural settings.
◉ 750 gallons (2840 L) Answer: According to NFPA 1901, a pumper
should be equipped with permanently mounted pump at a minimum
rating of __________ of water per minute.
◉ Attic Ladder Answer: Which of the following is one type of ground
ladder that must be installed by manufacturer for an apparatus to be
classified as an aerial apparatus in accordance with NFPA 1901?
,◉ Special service Answer: A hazardous materials apparatus or a
heavy technical rescue apparatus would be considered a
___________________ fire apparatus.
◉ Initial attack fire apparatus Answer: Which type of apparatus is
used to respond to small incidents such as dumpster fires, vehicle
fires, and brush fires in urban settings?
◉ The jurisdiction purchasing the fire apparatus Answer: Who is
ultimately responsible for conducting ongoing training to ensure
proficiency with regard to the safe and proper use of the fire
apparatus and its equipment?
◉ 85 ft (26-m) Answer: NFPA 1901 states that the quint shall be
equipped with a minimum total complement of _____________ of
ground ladders.
◉ 1000 gallons (4000 L) Answer: A mobile water supply apparatus
is equipped with one or more water tanks that meet the
requirements of NFPA 1901 and have a minimum certified capacity
of:
◉ 400 ft (120 m) Answer: According to NFPA 1901, what is the
minimum amount of attack hose to be carried on an initial attack fire
apparatus?
,◉ water tower Answer: Aerial fir apparatus can be configured in
numerous different classifications including aerial ladder, elevating
platform or:
◉ The specific performance requirements Answer: What is one of
the three things that a jurisdiction must convey to the manufacturer
when purchasing a fire apparatus?
◉ Hazardous Materials Answer: Which of the following fire
apparatus would be an example of a special service fire apparatus?
◉ Miscellaneous Answer: _____________________ equipment includes
portable tools and equipment carried on an apparatus, not including
hose, ladders, fixed power sources, reels, breathing air systems, or
other major equipment or components specified by the purchaser to
be permanently mounted on the apparatus as received from the
apparatus manufacturer.
◉ 2 Answer: In order for a fire apparatus to be classified as a
"quint". It must carry a minimum of ___________ combination spray
nozzles capable of flowing 95 GPM (360 L/Min)
◉ Full lift, extension and 90 degree rotation are all examples of what
type of apparatus tests? Answer: Aerial device inspection
, ◉ The _________________ system keeps a vehicle's axles in place and
holds up the fire apparatus and its entire load. Answer: suspension
◉ Fire apparatus and equipment should be inspected at least:
Answer: weekly
◉ Often, fire apparatus inspections are broken into sections.
According to the text, what is the first section that should be
completed? Answer: Exterior inspection
◉ An internal valve in a multistage pump that enables the user to
change the mode of operation to either series/ pressure or parallel/
volume. Answer: Transfer valve
◉ A system used inside the fire apparatus bay that connects to the
fire apparatus tailpipe and draws its exhaust outside the building.
Answer: Extractor exhaust system
◉ An evaluation of the fire apparatus and its equipment that is
intended to ensure its safe operation. Answer: Fire apparatus
inspection
◉ Making sure the fire apparatus is in proper working condition, the
emergency warning equipment is operating correctly, tools and
