1|Page
OSHA Basic Orientation Plus ||Verified Exam!!|| Most
Recent Exam Actual Complete Real Exam Questions
And Correct Answers (Verified Answers) Already
Graded A+ | Guaranteed Success | Newest Exam!!
The process Hazard Analysis (PHA) is one of the most
important parts of the PSM program. PHAs are used to
identify and evaluate major processes and ensure they are
- Answer-Evaluated, Controlled, and Identified
In the PSM standard OSHA states employees must be
trained if they work with highly hazardous chemicals. -
Answer-True
Facilities are not permitted to control your entrance and
exit in covered process areas. - Answer-False
What should be your first concern from the moment you
enter the work site? - Answer-Safety
Under the Stop Work Authority, you have the right and
obligation to stop a work activity if you have reason to
believe your own safety or a coworkers safety is in
,2|Page
jeopardy or if the work plan is not clearly established or
understood . - Answer-True
What's needed in order to operate a plant-owned vehicle
or mobile equipment while at a facility - Answer-qualified
only authorized only
What type of work permits you may encounter on the job -
Answer-safe work permits confined space entry permits,
hot work permits, line entry or line breaking permits,
lockout/tagout permits
What is the most frequently cited OSHA violation? -
Answer-Fall Protection
What key elements are essential to recognizing hazards
and reducing or eliminating workplace hazards? - Answer-
Management commitment and employee involvement
You are encouraged to ask your coworkers/supervisor for
information whenever you have a problem or are in doubt
about what to do on a job? - Answer-True
, 3|Page
It is your responsibility to follow all safety regulations,
inform your employer of any unsafe condition; report all
injuries no matter how minor they seem and wear the
proper personal protective equipment? - Answer-True
The OSHA standard that addresses the requirements for
preventing and lessening the results of a bad release of
toxic, reactive, flammable, or highly explosive hazardous
chemicals from a process - Answer-Process safety
management Standard
if you are replacing a piece of equipment the new one
should be the same as the one being removed. If its not
you should find out whether the change was on purpose.
what is this called - Answer-Management of change
Used only where an immediate life threatening hazard
exists - Answer-Danger
Used where immediate non life threatening hazards exist -
Answer-Warning Sign
OSHA Basic Orientation Plus ||Verified Exam!!|| Most
Recent Exam Actual Complete Real Exam Questions
And Correct Answers (Verified Answers) Already
Graded A+ | Guaranteed Success | Newest Exam!!
The process Hazard Analysis (PHA) is one of the most
important parts of the PSM program. PHAs are used to
identify and evaluate major processes and ensure they are
- Answer-Evaluated, Controlled, and Identified
In the PSM standard OSHA states employees must be
trained if they work with highly hazardous chemicals. -
Answer-True
Facilities are not permitted to control your entrance and
exit in covered process areas. - Answer-False
What should be your first concern from the moment you
enter the work site? - Answer-Safety
Under the Stop Work Authority, you have the right and
obligation to stop a work activity if you have reason to
believe your own safety or a coworkers safety is in
,2|Page
jeopardy or if the work plan is not clearly established or
understood . - Answer-True
What's needed in order to operate a plant-owned vehicle
or mobile equipment while at a facility - Answer-qualified
only authorized only
What type of work permits you may encounter on the job -
Answer-safe work permits confined space entry permits,
hot work permits, line entry or line breaking permits,
lockout/tagout permits
What is the most frequently cited OSHA violation? -
Answer-Fall Protection
What key elements are essential to recognizing hazards
and reducing or eliminating workplace hazards? - Answer-
Management commitment and employee involvement
You are encouraged to ask your coworkers/supervisor for
information whenever you have a problem or are in doubt
about what to do on a job? - Answer-True
, 3|Page
It is your responsibility to follow all safety regulations,
inform your employer of any unsafe condition; report all
injuries no matter how minor they seem and wear the
proper personal protective equipment? - Answer-True
The OSHA standard that addresses the requirements for
preventing and lessening the results of a bad release of
toxic, reactive, flammable, or highly explosive hazardous
chemicals from a process - Answer-Process safety
management Standard
if you are replacing a piece of equipment the new one
should be the same as the one being removed. If its not
you should find out whether the change was on purpose.
what is this called - Answer-Management of change
Used only where an immediate life threatening hazard
exists - Answer-Danger
Used where immediate non life threatening hazards exist -
Answer-Warning Sign
