NEWEST UPDATES 2026 |COMPLETELY SOLVED!!!
What is the EPA definition of a Man ufactured, charged and hermetically sealed in
small appliance? a factory and contains five pounds or less of
refrigerant
Which best describes the definition Systems manufactured, charged and
of Type 1 "Small Appliance", as hermetically sealed with (5) pounds of less of
defined by EPA? refrigerant
Does a PTAC fall under small PTAC or pressurized terminal air conditioner.
appliances? What about an MVAC? Yes and MVAC or motorized vehicle air
conditioning system. No
For small appliance use, a recovery 80% of the refrigerant when the compressor is not
device manufactured as of running or achieve a 4 inch vacuum under ARI
November 15, 1993 must be 740- 1993 and 90% of refrigerant when the
capable of recovering: compressor is operating or achieve a 4 inch
vacuum under ARI 740-1993
What is the maximum amount of 5 pounds of less
refrigerant a small appliance can
have by definition?
, The sale of Class 1 and Class November 14, 1994
2 refrigerants will be restricted
to technitions certified by an
EPA approved program after:
Who is responsible for complying It is the responsibility of the technician to comply
with the laws if the EPA changes the with any future changes in the law
laws after technician certification?
The release of vapor from the top of Not be vented and must be recovered
a graduated charging cylinder when
filling may:
Should regulations of the Clean Air It will be the technician's responsibility to learn and
Act (CAA) change after a technician comply with future changes in the law
is certified:
Recovery equipment Capable of recovering 80% of the refrigerant
manufactured after November 15, whether or not the compressor is operating or
1993 must meet what standards? achieve a 4 inch vacuum under conditions of ARI
740
System dependent (passive) None of the above
refrigerant recovery of small
appliances:
Recovery equipment Be capable of recovering 90% of the refrigerant
manufactured after November 15, with the compressor operating or achieve a 4 inch
1993 must meet what standards if vacuum under conditions of ARI 740
using a
compressor?