NCCER 26206-20 COMPREHENSIVE
REVIEW 2026 QUESTIONS WITH
ANSWERS GRADED A+
>> Companies with strong safety cultures usually have lower?
Answer: Turnover
>> Poor lighting, excessive noise, and inadequate guards for moving parts are
examples of
Answer: unsafe conditions
>> The activity that consists of breaking a job into its component tasks and then
analyzing each step for
potential hazards is called a _____.
Answer: Job Safety Analysis
>> A measure of the probability, consequences, and exposure related to an event
is referred to as _____.
Answer: Risk
>> If there is a hole in the floor of a structure, the preferred method of protecting
workers from falls is to _____.
Answer: Cover and mark it
>> The D-ring or support point on a safety harness should be placed _____.
Answer: Between the shoulder blades, middle of your back
>> A personal fall arrest system should be inspected monthly by a _____.
, Answer: Competent person
>> Lanyards that have no shock-absorbing features are used for _____.
Answer: Positioning
>> When placing a ladder against a platform or roof, the top of the ladder should
extend above the point where
the ladder touches the platform or roof by at least _____.
Answer: 3 Feet
>> When performing overhead work on scaffolding, what protective measures
must be taken to prevent objects
from falling and striking a person below?
Answer: toe boards, debris nets, or canopies
>> When stacking materials such as bricks or block, do not stack materials
beyond a _____.
Answer: 4:1 Ratio
>> Benching systems are prohibited in _____.
Answer: Type C
>> In the absence of other information, all soil in an excavation should be treated
as if it is _____.
Answer: Type C
>> Daily inspection of an excavation must be performed by a(n) _____.
Answer: Competent person
>> One of the most common grounding systems used for protection against
accidental electrical shock is the
REVIEW 2026 QUESTIONS WITH
ANSWERS GRADED A+
>> Companies with strong safety cultures usually have lower?
Answer: Turnover
>> Poor lighting, excessive noise, and inadequate guards for moving parts are
examples of
Answer: unsafe conditions
>> The activity that consists of breaking a job into its component tasks and then
analyzing each step for
potential hazards is called a _____.
Answer: Job Safety Analysis
>> A measure of the probability, consequences, and exposure related to an event
is referred to as _____.
Answer: Risk
>> If there is a hole in the floor of a structure, the preferred method of protecting
workers from falls is to _____.
Answer: Cover and mark it
>> The D-ring or support point on a safety harness should be placed _____.
Answer: Between the shoulder blades, middle of your back
>> A personal fall arrest system should be inspected monthly by a _____.
, Answer: Competent person
>> Lanyards that have no shock-absorbing features are used for _____.
Answer: Positioning
>> When placing a ladder against a platform or roof, the top of the ladder should
extend above the point where
the ladder touches the platform or roof by at least _____.
Answer: 3 Feet
>> When performing overhead work on scaffolding, what protective measures
must be taken to prevent objects
from falling and striking a person below?
Answer: toe boards, debris nets, or canopies
>> When stacking materials such as bricks or block, do not stack materials
beyond a _____.
Answer: 4:1 Ratio
>> Benching systems are prohibited in _____.
Answer: Type C
>> In the absence of other information, all soil in an excavation should be treated
as if it is _____.
Answer: Type C
>> Daily inspection of an excavation must be performed by a(n) _____.
Answer: Competent person
>> One of the most common grounding systems used for protection against
accidental electrical shock is the
