OSHA Final Exam Questions With 100% Verified Answers.

Class E - Correct Answers Which hard hat class protects against falling objects and high-voltage electric shock and burns? Inhalation - Correct Answers In the construction industry, what is the most common route of lead exposure? Correcting Violations - Correct Answers According to OSHA, workers have all these responsibilities EXCEPT: Following the employer's safety and health rules Reporting hazardous conditions Cooperating with OSHA inspectors Correcting violations lack of water - Correct Answers Hazards directly related to excavations include all these types EXCEPT: Lack of oxygen—asphyxiation Inhalation of toxic materials Lack of water—dehydration Fire 3 - Correct Answers If they discover important new information about a chemical's hazards, manufacturers or importers of hazardous chemicals must update the chemical's Material Safety Data Sheet within _____ months. Set up on the side of the wall that is scaffolded - Correct Answers Limited access zones around masonry wall construction must meet all these requirements EXCEPT: Equal to the height of the wall plus four feet Set up on the side of the wall that is scaffolded Run the entire length of the wall Restricted to workers actively engaged in building the wall placement in kind - Correct AnswersAs part of Process Safety Management, written procedures are required for establishing and implementing changes in the event of all these situations EXCEPT: New technology Replacement in kind Change in chemicals Change in equipment emergency escape routes - Correct AnswersAs part of a written plan for emergency operations, the employer must identify _____ at a construction site before construction operations begin. 2 seconds - Correct AnswersA worker who is not using fall arrest protection loses his footing at the top of a six-story building, calls for help, and then falls. If his coworkers on the ground hear his cry, how much time do they have to take measures to break his fall? All workers and their employers under federal government authority - Correct AnswersWho is covered by the OSH Act? All workers and their employers under federal government authority All self-employed workers Immediate members of all farm families The unemployed Cadmium-bearing filler materials - Correct AnswersWhich of these metals should not be welded, cut, or heated unless general or local ventilation is installed? Energized - Correct AnswersWhen there is a break in an electric tool's insulation or wiring, the tool's metal parts may become _____. Tested - Correct AnswersBefore a worker enters a confined space, the internal atmosphere must be _____. the total number of employees, including temporary employees - Correct AnswersWhat criteria determine a company's exemption from OSHA's injury-recording requirement? burns - Correct AnswersWhat causes the majority of fire-related deaths? safety switches - Correct AnswersPower tools must be fitted with guards and _____. top support - Correct AnswersThe working length of a ladder is the distance between the foot and the _____. Procedures for doing the job - Correct AnswersIn order to decrease the risk of accidents and injuries in the workplace, employers should provide frequent and regular inspections of all these areas EXCEPT: The job site Materials Equipment used by employees Procedures for doing the job Contact with energized power lines - Correct Answers According to OSHA, nearly 45 percent of crane-related accidents are caused by: Bulkiness and weight - Correct Answers What are the two major hazards involved in handling and storing materials?