Florida Mobile Home Installer License
Examination Practice Questions And
Correct Answers (Verified Answers) Plus
Rationales 2026 Q&A | Instant
Download Pdf
1. Which of the following is required before installing a mobile home in
Florida?
A) Proof of homeowner's insurance
B) Mobile home installation permit
C) Mobile home resale certificate
D) Structural engineer approval
B) Mobile home installation permit
Rationale: Florida law requires a permit to ensure all installations meet
safety and code standards.
, 2. Who is responsible for ensuring a mobile home is installed according
to manufacturer specifications?
A) Local building inspector
B) Homeowner
C) Licensed installer
D) Mobile home dealer
C) Licensed installer
Rationale: The licensed installer must follow manufacturer and state
requirements for proper installation.
3. What is the minimum clearance required between the bottom of a
mobile home and the ground in Florida?
A) 6 inches
B) 12 inches
C) 18 inches
D) 24 inches
B) 12 inches
Rationale: Florida building codes specify at least 12 inches of clearance to
prevent moisture damage and allow ventilation.
4. Before setting a mobile home, the installer must:
A) Level the site and prepare the foundation
, B) Paint the exterior
C) Install skirting immediately
D) Connect utilities
A) Level the site and prepare the foundation
Rationale: Proper site preparation is critical for stability and safety.
5. Anchoring a mobile home in Florida must be able to withstand wind
speeds up to:
A) 90 mph
B) 110 mph
C) 140 mph
D) 170 mph
C) 140 mph
Rationale: Florida code requires anchoring systems to meet or exceed the
design wind loads based on the home’s location.
6. What type of anchoring system is commonly used for mobile homes in
Florida?
A) Concrete blocks only
B) Tie-down straps with anchors
C) Wood stakes
D) Adhesive glue
, B) Tie-down straps with anchors
Rationale: Tie-down systems secure the home and prevent uplift in high
winds.
7. Who can legally perform mobile home installations in Florida?
A) Any construction worker
B) Licensed mobile home installer
C) Homeowner only
D) Real estate agent
B) Licensed mobile home installer
Rationale: Florida law requires licensure for safety, liability, and code
compliance.
8. What is the purpose of skirting around a mobile home?
A) Improve aesthetics only
B) Provide structural support
C) Protect from animals, moisture, and improve energy efficiency
D) Reduce installation cost
C) Protect from animals, moisture, and improve energy efficiency
Rationale: Skirting shields the underside, prevents debris and pests, and
aids insulation.
Examination Practice Questions And
Correct Answers (Verified Answers) Plus
Rationales 2026 Q&A | Instant
Download Pdf
1. Which of the following is required before installing a mobile home in
Florida?
A) Proof of homeowner's insurance
B) Mobile home installation permit
C) Mobile home resale certificate
D) Structural engineer approval
B) Mobile home installation permit
Rationale: Florida law requires a permit to ensure all installations meet
safety and code standards.
, 2. Who is responsible for ensuring a mobile home is installed according
to manufacturer specifications?
A) Local building inspector
B) Homeowner
C) Licensed installer
D) Mobile home dealer
C) Licensed installer
Rationale: The licensed installer must follow manufacturer and state
requirements for proper installation.
3. What is the minimum clearance required between the bottom of a
mobile home and the ground in Florida?
A) 6 inches
B) 12 inches
C) 18 inches
D) 24 inches
B) 12 inches
Rationale: Florida building codes specify at least 12 inches of clearance to
prevent moisture damage and allow ventilation.
4. Before setting a mobile home, the installer must:
A) Level the site and prepare the foundation
, B) Paint the exterior
C) Install skirting immediately
D) Connect utilities
A) Level the site and prepare the foundation
Rationale: Proper site preparation is critical for stability and safety.
5. Anchoring a mobile home in Florida must be able to withstand wind
speeds up to:
A) 90 mph
B) 110 mph
C) 140 mph
D) 170 mph
C) 140 mph
Rationale: Florida code requires anchoring systems to meet or exceed the
design wind loads based on the home’s location.
6. What type of anchoring system is commonly used for mobile homes in
Florida?
A) Concrete blocks only
B) Tie-down straps with anchors
C) Wood stakes
D) Adhesive glue
, B) Tie-down straps with anchors
Rationale: Tie-down systems secure the home and prevent uplift in high
winds.
7. Who can legally perform mobile home installations in Florida?
A) Any construction worker
B) Licensed mobile home installer
C) Homeowner only
D) Real estate agent
B) Licensed mobile home installer
Rationale: Florida law requires licensure for safety, liability, and code
compliance.
8. What is the purpose of skirting around a mobile home?
A) Improve aesthetics only
B) Provide structural support
C) Protect from animals, moisture, and improve energy efficiency
D) Reduce installation cost
C) Protect from animals, moisture, and improve energy efficiency
Rationale: Skirting shields the underside, prevents debris and pests, and
aids insulation.
