1 | Page
EVITP EXAM | EVITP PRACTICE EXAM 2026 REAL EXAM
QUESTIONS AND CORRECT ANSWERS (100% VERIFIED) |
GRADED A+ | NEWEST UPDATE 2026/2027 | ASSURED PASS.
The first EV chargers were external and supplied DC current directly to
the vehicle's batteries.
Select one:
a.True
b.False - ANSWER-a.True
Which of the following was an early electric vehicle charger?
Select one:
a.City of Seattle's Electro-Park electrified parking space
b.Ford Dyna-Charge
c.General Electric arc rectifier
d.Tesla Model 001 Charger - ANSWER-c.General Electric arc rectifier
Later in the development of EV charging equipment, the actual charging
means was accomplished by a(n) ? that converts AC to DC to be used in
charging the vehicle's battery.
,2 | Page
Select one:
a.internal combustion generator
b.inverter
c.rectifier
d.voltage source - ANSWER-c.rectifier
Electric vehicle supply equipment (EVSE) provides which of the
following safety features?
Select one:
a.A continuously energized output
b.GFCI protection
c.Hardware fault detection
d.Both b. and c. - ANSWER-d.Both b. and c.
An AC charger with a single-phase 120-volt connection and 1416
amperes of continuous current output is classified as a ?
charger. Select
one: a.Level 1
b.Level 2
,3 | Page
c.low-voltage
d.SAE standard - ANSWER-a.Level 1
The purpose of the J1772 connector pins is to provide ? .
Select one:
a.a charging interface that is safe for consumers to use
b.a means to signal the EVSE to stop charging based on the pin contact
state
c.signals to the EVSE that the connector is properly seated on the
vehicle
d.all of the above - ANSWER-d.all of the above
EVSE provides DC power to the electric vehicle charging port.
Select one:
True
False - ANSWER-False
DC charging equipment provides DC directly to ? in an EV.
Select one:
, 4 | Page
a.battery management systems
b.battery monitoring devices
c.charge multiplier systems
d.current management systems - ANSWER-a.battery management
systems
Which of the following is true about the J1772 standard control pilot
terminal pin's function?
Select one:
a.It changes the state of the EVSE according to the voltage present.
b.It defines the state of the EVSE.
c.It uses a +12V to -12V AC square wave signal.
d.All of the above - ANSWER-d.All of the above
Which of the following is the Japanese DC quick charging
standard? Select one:
a.CHAdeMO
b.JARI
c.SAE
EVITP EXAM | EVITP PRACTICE EXAM 2026 REAL EXAM
QUESTIONS AND CORRECT ANSWERS (100% VERIFIED) |
GRADED A+ | NEWEST UPDATE 2026/2027 | ASSURED PASS.
The first EV chargers were external and supplied DC current directly to
the vehicle's batteries.
Select one:
a.True
b.False - ANSWER-a.True
Which of the following was an early electric vehicle charger?
Select one:
a.City of Seattle's Electro-Park electrified parking space
b.Ford Dyna-Charge
c.General Electric arc rectifier
d.Tesla Model 001 Charger - ANSWER-c.General Electric arc rectifier
Later in the development of EV charging equipment, the actual charging
means was accomplished by a(n) ? that converts AC to DC to be used in
charging the vehicle's battery.
,2 | Page
Select one:
a.internal combustion generator
b.inverter
c.rectifier
d.voltage source - ANSWER-c.rectifier
Electric vehicle supply equipment (EVSE) provides which of the
following safety features?
Select one:
a.A continuously energized output
b.GFCI protection
c.Hardware fault detection
d.Both b. and c. - ANSWER-d.Both b. and c.
An AC charger with a single-phase 120-volt connection and 1416
amperes of continuous current output is classified as a ?
charger. Select
one: a.Level 1
b.Level 2
,3 | Page
c.low-voltage
d.SAE standard - ANSWER-a.Level 1
The purpose of the J1772 connector pins is to provide ? .
Select one:
a.a charging interface that is safe for consumers to use
b.a means to signal the EVSE to stop charging based on the pin contact
state
c.signals to the EVSE that the connector is properly seated on the
vehicle
d.all of the above - ANSWER-d.all of the above
EVSE provides DC power to the electric vehicle charging port.
Select one:
True
False - ANSWER-False
DC charging equipment provides DC directly to ? in an EV.
Select one:
, 4 | Page
a.battery management systems
b.battery monitoring devices
c.charge multiplier systems
d.current management systems - ANSWER-a.battery management
systems
Which of the following is true about the J1772 standard control pilot
terminal pin's function?
Select one:
a.It changes the state of the EVSE according to the voltage present.
b.It defines the state of the EVSE.
c.It uses a +12V to -12V AC square wave signal.
d.All of the above - ANSWER-d.All of the above
Which of the following is the Japanese DC quick charging
standard? Select one:
a.CHAdeMO
b.JARI
c.SAE
