NCCER CORE MODULE 1 QUESTIONS AND CORRECT
DETAILED ANSWERS (VERIFIED ANSWERS) |ALREADY
GRADED A+||BRAND NEW
Companies with strong safety cultures usually have lower?
Ans✓✓✓Turnover
Poor lighting, excessive noise, and inadequate guards for moving parts
are examples of Ans✓✓✓unsafe conditions
The activity that consists of breaking a job into its component tasks and
then analyzing each step for
potential hazards is called a _____. Ans✓✓✓Job Safety Analysis
A measure of the probability, consequences, and exposure related to an
event is referred to as _____. Ans✓✓✓Risk
If there is a hole in the floor of a structure, the preferred method of
protecting workers from falls is to _____. Ans✓✓✓Cover and mark it
The D-ring or support point on a safety harness should be placed _____.
Ans✓✓✓Between the shoulder blades, middle of your back
A personal fall arrest system should be inspected monthly by a _____.
Ans✓✓✓Competent person
, Lanyards that have no shock-absorbing features are used for _____.
Ans✓✓✓Positioning
When placing a ladder against a platform or roof, the top of the ladder
should extend above the point where
the ladder touches the platform or roof by at least _____. Ans✓✓✓3
Feet
When performing overhead work on scaffolding, what protective
measures must be taken to prevent objects
from falling and striking a person below? Ans✓✓✓toe boards, debris
nets, or canopies
When stacking materials such as bricks or block, do not stack materials
beyond a _____. Ans✓✓✓4:1 Ratio
Benching systems are prohibited in _____. Ans✓✓✓Type C
In the absence of other information, all soil in an excavation should be
treated as if it is _____. Ans✓✓✓Type C
Daily inspection of an excavation must be performed by a(n) _____.
Ans✓✓✓Competent person
DETAILED ANSWERS (VERIFIED ANSWERS) |ALREADY
GRADED A+||BRAND NEW
Companies with strong safety cultures usually have lower?
Ans✓✓✓Turnover
Poor lighting, excessive noise, and inadequate guards for moving parts
are examples of Ans✓✓✓unsafe conditions
The activity that consists of breaking a job into its component tasks and
then analyzing each step for
potential hazards is called a _____. Ans✓✓✓Job Safety Analysis
A measure of the probability, consequences, and exposure related to an
event is referred to as _____. Ans✓✓✓Risk
If there is a hole in the floor of a structure, the preferred method of
protecting workers from falls is to _____. Ans✓✓✓Cover and mark it
The D-ring or support point on a safety harness should be placed _____.
Ans✓✓✓Between the shoulder blades, middle of your back
A personal fall arrest system should be inspected monthly by a _____.
Ans✓✓✓Competent person
, Lanyards that have no shock-absorbing features are used for _____.
Ans✓✓✓Positioning
When placing a ladder against a platform or roof, the top of the ladder
should extend above the point where
the ladder touches the platform or roof by at least _____. Ans✓✓✓3
Feet
When performing overhead work on scaffolding, what protective
measures must be taken to prevent objects
from falling and striking a person below? Ans✓✓✓toe boards, debris
nets, or canopies
When stacking materials such as bricks or block, do not stack materials
beyond a _____. Ans✓✓✓4:1 Ratio
Benching systems are prohibited in _____. Ans✓✓✓Type C
In the absence of other information, all soil in an excavation should be
treated as if it is _____. Ans✓✓✓Type C
Daily inspection of an excavation must be performed by a(n) _____.
Ans✓✓✓Competent person
