Ironworker Nccer Questions And Correct Detailed Answers
(Verified Answers) |Already Graded A+||Brand New
Assuming A Grip Distance Of 1", What Is The Minimun Length Of The
Bolt Required For A 3/4" Diameter Bolt? Ans✓✓✓2 1/4"
The Location Of Bridging Depends On The Length Of The:
Ans✓✓✓Span
Before Bundles Of Deck Can Be Landed On A Bar Joist, What Action
Must Be Completed? Ans✓✓✓Joist Must Have Bridging Installed
When Materials Are Being Hoisted To An Upper Level, A Tag Line Is
Used To: Ans✓✓✓Help Control The Load
Items Such As Field Welding Instructions, Hangers, And Connection
Details Are Generally Found On: Ans✓✓✓The Detail Drawings
The Ability Of A Structural Steel Component To Resist Pulling Forces
Is Known As: Ans✓✓✓Tensile Strenght
What Type Of Decking Has Impressions Formed On Its Rib?
Ans✓✓✓Composite Deck
, The Ground Floor Elevation Is Shown As +100.25. The Roof Top
Elevation Is Shown As +130.50. What Is The Difference In Elevation?
Ans✓✓✓30'3
In What Drawing Would One Find The Correct Bolt Size For A Beam
Being Bolted? Ans✓✓✓Detail Drawing
What Should Always Be Used To Ignite A Cutting Torch?
Ans✓✓✓Striker
Equilizing The Weight Of The Load At Various Lifting Points Is Called:
Ans✓✓✓Configuration
A Combination Square Without A Protractor Head Is Used To Layout:
Ans✓✓✓45 Degree Lines
Prior To Inspection It Is Good Practice To Test All Studs With What
Method? Ans✓✓✓Ping Test
Where Is The Fulcrum Or Pivot Point On A Forklift? Ans✓✓✓The
Front Axle
A Document That Outlines Weights,Crane Configuration And Rigging
Requirements For A Lift Is Called An: Ans✓✓✓Lift Plan
(Verified Answers) |Already Graded A+||Brand New
Assuming A Grip Distance Of 1", What Is The Minimun Length Of The
Bolt Required For A 3/4" Diameter Bolt? Ans✓✓✓2 1/4"
The Location Of Bridging Depends On The Length Of The:
Ans✓✓✓Span
Before Bundles Of Deck Can Be Landed On A Bar Joist, What Action
Must Be Completed? Ans✓✓✓Joist Must Have Bridging Installed
When Materials Are Being Hoisted To An Upper Level, A Tag Line Is
Used To: Ans✓✓✓Help Control The Load
Items Such As Field Welding Instructions, Hangers, And Connection
Details Are Generally Found On: Ans✓✓✓The Detail Drawings
The Ability Of A Structural Steel Component To Resist Pulling Forces
Is Known As: Ans✓✓✓Tensile Strenght
What Type Of Decking Has Impressions Formed On Its Rib?
Ans✓✓✓Composite Deck
, The Ground Floor Elevation Is Shown As +100.25. The Roof Top
Elevation Is Shown As +130.50. What Is The Difference In Elevation?
Ans✓✓✓30'3
In What Drawing Would One Find The Correct Bolt Size For A Beam
Being Bolted? Ans✓✓✓Detail Drawing
What Should Always Be Used To Ignite A Cutting Torch?
Ans✓✓✓Striker
Equilizing The Weight Of The Load At Various Lifting Points Is Called:
Ans✓✓✓Configuration
A Combination Square Without A Protractor Head Is Used To Layout:
Ans✓✓✓45 Degree Lines
Prior To Inspection It Is Good Practice To Test All Studs With What
Method? Ans✓✓✓Ping Test
Where Is The Fulcrum Or Pivot Point On A Forklift? Ans✓✓✓The
Front Axle
A Document That Outlines Weights,Crane Configuration And Rigging
Requirements For A Lift Is Called An: Ans✓✓✓Lift Plan
