1|Page
CERTIFIED PLAYGROUND SAFETY INSPECTOR (CSPI) EXAM LATEST 2026-2027
ACTUAL EXAM WITH COMPLETE QUESTIONS AND CORRECT DETAILED
ANSWERS (100% VERIFIED ANSWERS) |ALREADY GRADED A+| ||PROFESSOR
VERIFIED|| ||BRANDNEW!!!||
Slide Exit Use Zone Clearance Zone- CPSC Section 5.3.6.5
states: Area at the end of the slide should not overlap with other
________________________ use zones? - ANSWER-equipment
Slide Clearance Zone - Overlap of Parallel Slide Bed Paths:
Overlap of Slide Exit Clearance Zones is
____________________ for parallel slide bed paths that are
going in the same direction ? - ANSWER-parallel
Slide Exit Clearance Zones - Overlap of Diverging Slide Bed
Paths: Overlap of Slide Exit Clearance Zones is permitted for
__________________ slide bed paths? - ANSWER-diverging
Slide Exit Clearance Zones - Non-overlapping Converging Slide
Bed Paths: Overlap of converging slide bed paths Clearance
Zones is ______________________________? - ANSWER-Non-
Compliant
,2|Page
Single user equipment, such as sand diggers, which require users
to maintain contact with the ground have no
_______________________ use zone requirements? -
ANSWER-individual
Functionally Linked Play Structures: a play structure that acts as a
single unit in its _________________ form or sense of function
even if components are not physically linked? - ANSWER-
physical
Functionally Linked Play Structures: Use Zones for play structures
that are not physically attached but are play functionally linked are
determined as if they were parts of a
__________________________ structure? - ANSWER-
composite
Functionally Linked Play Structures -the distance between
stepping surfaces on two functionally linked play structures shall
not be greater than ________ for ages 2-5 and not be greater
than __________ for ages 5-12 ? - ANSWER-1) 12" or 300 mm
2) 18" or 460 mm
,3|Page
Composite Play Structure Use Zone- has a _______ use zone
around perimeter ? - ANSWER-72" or 1830 mm
Composite Play Structure Use Zone - Slide exit use length is a
minimum of _________ and a maximum of ________ ? -
ANSWER-1) 72" or 1830 mm
2) 96" or 2440 mm
Composite Play Structure Use Zone - Balance beam is
_______________________________ linked ? - ANSWER-
functionally
Composite Play Structure Use Zone - Play panels require
_______ use zone ? - ANSWER-no
Composite Play Structure Use Zone - ________________ open
space is not subject to 72" (1830 mm) use zone requirements ? -
ANSWER-interior
, 4|Page
All playground Use Zones must comply with the appropriate
safety standards included in ASTM F2223, located in the CPSI
_______________ ___________________ ? - ANSWER-1) Field
2) Guide
The Fall Height is:
A) the vertical distance from a designated play surface and the
protective surface beneath it
B) a property of the impact attenuation surfacing
C) measured from the lowest designated play surface on the
equipment
D) measured in either g-max or HIC - ANSWER-A) the vertical
distance from a designated play surface and the protective
surface beneath it
Which of the following statements about use zones is CORRECT
?
A) All rotating equipment has 72" (1830 mm) use zones that may
not overlap
CERTIFIED PLAYGROUND SAFETY INSPECTOR (CSPI) EXAM LATEST 2026-2027
ACTUAL EXAM WITH COMPLETE QUESTIONS AND CORRECT DETAILED
ANSWERS (100% VERIFIED ANSWERS) |ALREADY GRADED A+| ||PROFESSOR
VERIFIED|| ||BRANDNEW!!!||
Slide Exit Use Zone Clearance Zone- CPSC Section 5.3.6.5
states: Area at the end of the slide should not overlap with other
________________________ use zones? - ANSWER-equipment
Slide Clearance Zone - Overlap of Parallel Slide Bed Paths:
Overlap of Slide Exit Clearance Zones is
____________________ for parallel slide bed paths that are
going in the same direction ? - ANSWER-parallel
Slide Exit Clearance Zones - Overlap of Diverging Slide Bed
Paths: Overlap of Slide Exit Clearance Zones is permitted for
__________________ slide bed paths? - ANSWER-diverging
Slide Exit Clearance Zones - Non-overlapping Converging Slide
Bed Paths: Overlap of converging slide bed paths Clearance
Zones is ______________________________? - ANSWER-Non-
Compliant
,2|Page
Single user equipment, such as sand diggers, which require users
to maintain contact with the ground have no
_______________________ use zone requirements? -
ANSWER-individual
Functionally Linked Play Structures: a play structure that acts as a
single unit in its _________________ form or sense of function
even if components are not physically linked? - ANSWER-
physical
Functionally Linked Play Structures: Use Zones for play structures
that are not physically attached but are play functionally linked are
determined as if they were parts of a
__________________________ structure? - ANSWER-
composite
Functionally Linked Play Structures -the distance between
stepping surfaces on two functionally linked play structures shall
not be greater than ________ for ages 2-5 and not be greater
than __________ for ages 5-12 ? - ANSWER-1) 12" or 300 mm
2) 18" or 460 mm
,3|Page
Composite Play Structure Use Zone- has a _______ use zone
around perimeter ? - ANSWER-72" or 1830 mm
Composite Play Structure Use Zone - Slide exit use length is a
minimum of _________ and a maximum of ________ ? -
ANSWER-1) 72" or 1830 mm
2) 96" or 2440 mm
Composite Play Structure Use Zone - Balance beam is
_______________________________ linked ? - ANSWER-
functionally
Composite Play Structure Use Zone - Play panels require
_______ use zone ? - ANSWER-no
Composite Play Structure Use Zone - ________________ open
space is not subject to 72" (1830 mm) use zone requirements ? -
ANSWER-interior
, 4|Page
All playground Use Zones must comply with the appropriate
safety standards included in ASTM F2223, located in the CPSI
_______________ ___________________ ? - ANSWER-1) Field
2) Guide
The Fall Height is:
A) the vertical distance from a designated play surface and the
protective surface beneath it
B) a property of the impact attenuation surfacing
C) measured from the lowest designated play surface on the
equipment
D) measured in either g-max or HIC - ANSWER-A) the vertical
distance from a designated play surface and the protective
surface beneath it
Which of the following statements about use zones is CORRECT
?
A) All rotating equipment has 72" (1830 mm) use zones that may
not overlap
