BICSI RCDD Exam with verified detailed solutions || || || || || ||
Cabling facility typically housed in a telecom enclosure
|| || || || || || ||
Floor distributor ||
Min amount of floor space allocated for an ER
|| || || || || || || ||
3m (10ft) by 5m (16ft)
|| || || ||
Industry average used to calculate space for work areas
|| || || || || || || ||
9.3m (100ft) ||
Min size permitted for ER with less than 200 work areas
|| || || || || || || || || ||
14m (150ft) ||
Amount of floor area required for equipment cabinets in ER
|| || || || || || || || ||
10ft2 of floor area plus additional 10ft2 for working clearance
|| || || || || || || || ||
Min amount of access headroom required for cable tray in ER
|| || || || || || || || || ||
8in
Recommended amount of access headroom for cable tray in ER || || || || || || || || ||
12in
# of sleeves provided to run cable to ER
|| || || || || || || ||
At least (4) 4 trade size sleeves with at least one spare
|| || || || || || || || || || ||
Topology generally deployed for OSP cabling || || || || ||
Star
Slot used for BB distro is typically placed flushed against wall and should have min length of
|| || || || || || || || || || || || || || || || ||
__________ parallel to the wall || || || ||
10in
Size of pathway using slots should be one slot sized at ________ for up to _________
|| || || || || || || || || || || || || || ||
0.04m2 (60in2) and 3,716m2 (40,000ft2) || || || ||
, Termination field color used to identify a first level intrabuilding backbone || || || || || || || || || ||
White
Connections between any two horizontal cross connects shall not pass through more than
|| || || || || || || || || || || || ||
_______ cross-connections ||
Three
Backbone distro system shall have no more than ______ levels of cross-connections
|| || || || || || || || || || ||
Two
Ethernet in the first mile ________ physical layber signaling operates over one or more pairs
|| || || || || || || || || || || || || || ||
of voice grade balanced twisted-pair cable
|| || || || ||
2BASE-TL
Slot area sizing should be increased by 12in2 with each _______ increase in usable floor space
|| || || || || || || || || || || || || || || ||
served
3716m2 (40,000ft2) ||
Ideally, the MC (CD) would be co-located in the ________
|| || || || || || || || ||
ER
Within backbone applications, a passive optical network (PON) is typically a _________ fiber
|| || || || || || || || || || || || ||
to the premises network architecture
|| || || ||
Point-to-multipoint
Sleeves or slots used for backbone distribution ________ be located directly above or below
|| || || || || || || || || || || || || ||
the wall space to be used for termination fields; should or should not
|| || || || || || || || || || || ||
Should not ||
Threads on steel conduit ends are covered by industry color-coded thread protectors. Name
|| || || || || || || || || || || || ||
them
RMC - blue, black, red|| || || ||
IMC - orange, yellow, green
|| || || ||
EoDSL networks can provide 10Mb/s 10PASS-T using balanced twisted-pair cables to a max
|| || || || || || || || || || || || ||
span of ||
750m (2461ft) ||
Cabling facility typically housed in a telecom enclosure
|| || || || || || ||
Floor distributor ||
Min amount of floor space allocated for an ER
|| || || || || || || ||
3m (10ft) by 5m (16ft)
|| || || ||
Industry average used to calculate space for work areas
|| || || || || || || ||
9.3m (100ft) ||
Min size permitted for ER with less than 200 work areas
|| || || || || || || || || ||
14m (150ft) ||
Amount of floor area required for equipment cabinets in ER
|| || || || || || || || ||
10ft2 of floor area plus additional 10ft2 for working clearance
|| || || || || || || || ||
Min amount of access headroom required for cable tray in ER
|| || || || || || || || || ||
8in
Recommended amount of access headroom for cable tray in ER || || || || || || || || ||
12in
# of sleeves provided to run cable to ER
|| || || || || || || ||
At least (4) 4 trade size sleeves with at least one spare
|| || || || || || || || || || ||
Topology generally deployed for OSP cabling || || || || ||
Star
Slot used for BB distro is typically placed flushed against wall and should have min length of
|| || || || || || || || || || || || || || || || ||
__________ parallel to the wall || || || ||
10in
Size of pathway using slots should be one slot sized at ________ for up to _________
|| || || || || || || || || || || || || || ||
0.04m2 (60in2) and 3,716m2 (40,000ft2) || || || ||
, Termination field color used to identify a first level intrabuilding backbone || || || || || || || || || ||
White
Connections between any two horizontal cross connects shall not pass through more than
|| || || || || || || || || || || || ||
_______ cross-connections ||
Three
Backbone distro system shall have no more than ______ levels of cross-connections
|| || || || || || || || || || ||
Two
Ethernet in the first mile ________ physical layber signaling operates over one or more pairs
|| || || || || || || || || || || || || || ||
of voice grade balanced twisted-pair cable
|| || || || ||
2BASE-TL
Slot area sizing should be increased by 12in2 with each _______ increase in usable floor space
|| || || || || || || || || || || || || || || ||
served
3716m2 (40,000ft2) ||
Ideally, the MC (CD) would be co-located in the ________
|| || || || || || || || ||
ER
Within backbone applications, a passive optical network (PON) is typically a _________ fiber
|| || || || || || || || || || || || ||
to the premises network architecture
|| || || ||
Point-to-multipoint
Sleeves or slots used for backbone distribution ________ be located directly above or below
|| || || || || || || || || || || || || ||
the wall space to be used for termination fields; should or should not
|| || || || || || || || || || || ||
Should not ||
Threads on steel conduit ends are covered by industry color-coded thread protectors. Name
|| || || || || || || || || || || || ||
them
RMC - blue, black, red|| || || ||
IMC - orange, yellow, green
|| || || ||
EoDSL networks can provide 10Mb/s 10PASS-T using balanced twisted-pair cables to a max
|| || || || || || || || || || || || ||
span of ||
750m (2461ft) ||
