Page 1 of 116
Florida Glass and Glazing Contractor EXAM
ACTUAL EXAM COMPLETE 200 QUESTIONS
AND VERIFIED SOLUTIONS LATEST UPDATE
THIS YEAR
Florida Glass and Glazing Contractor ExaM– Exam Coverage Overview
The Florida Glass and Glazing Contractor Exam assesses knowledge, skills, and practical
understanding required to perform as a licensed contractor in the state of Florida. The exam
covers the following areas:
Scope of Work & Contractor Responsibilities – Understanding the role of a glazing contractor,
legal responsibilities, and project management.
Glass Types and Materials – Knowledge of tempered, laminated, insulated, and specialty glass,
including specifications, codes, and applications.
Installation Techniques & Procedures – Proper handling, cutting, fitting, and securing glass;
sealants, gaskets, and framing systems.
Building Codes, Standards, and Regulations – Florida Building Code, ASTM standards, OSHA
safety requirements, and local permit processes.
Safety and Risk Management – On-site safety practices, protective equipment, hazard
identification, and risk mitigation.
Structural Glazing and Curtain Walls – Design, load considerations, anchoring, and
performance requirements.
Energy Efficiency & Environmental Considerations – Insulated glass units, Low-E coatings, solar
control, and sustainability practices.
Business and Project Management – Contracts, estimating, subcontractor management, and
client communication.
Troubleshooting and Maintenance – Repair, replacement, and inspection of glazing systems.
Batch 1: Florida Glass and Glazing Contractor Exam 2026 – Questions 1-50
,Page 2 of 116
1.
A homeowner requests the installation of a large, floor-to-ceiling window in a coastal area with
frequent hurricanes. Which glass system should a licensed glazing contractor recommend to
maximize both impact resistance and compliance with Florida building codes?
A) Single-pane clear glass
B) Laminated glass with a polyvinyl butyral (PVB) interlayer
C) Tinted tempered glass
D) Frosted annealed glass
Answer: B) Laminated glass with a polyvinyl butyral (PVB) interlayer
Rationale: Laminated glass, consisting of two layers of glass bonded with a PVB interlayer,
provides superior impact resistance and prevents shattering. It is required in hurricane-prone
areas under the Florida Building Code.
2.
During a commercial storefront installation, a contractor notices slight warping in the aluminum
frame. What is the most appropriate corrective action to ensure proper glazing installation
without compromising safety or warranties?
A) Force the glass into the warped frame using silicone sealant
B) Replace or adjust the frame to achieve proper alignment before glazing
,Page 3 of 116
C) Bend the glass to match the frame
D) Apply extra caulking to fill gaps
Answer: B) Replace or adjust the frame to achieve proper alignment before glazing
Rationale: Installing glass in a warped frame can cause stress, breakage, and void manufacturer
warranties. Proper alignment is critical for structural and aesthetic integrity.
3.
A client wants a window system that reduces heat gain and improves energy efficiency while
maintaining clear visibility. Which type of glazing system should a contractor recommend?
A) Single-pane clear glass
B) Insulated glass unit (IGU) with Low-E coating
C) Laminated safety glass
D) Frosted glass
Answer: B) Insulated glass unit (IGU) with Low-E coating
Rationale: IGUs with Low-E coatings minimize solar heat gain while allowing visible light,
improving energy efficiency and indoor comfort, in compliance with Florida energy codes.
4.
, Page 4 of 116
Which of the following is not an acceptable method for securing glass in an exterior storefront
system to prevent air and water infiltration?
A) Use of silicone sealant around perimeter
B) Rubber gaskets or EPDM glazing channels
C) Mechanical fasteners directly drilled through the glass
D) Pressure plate systems with setting blocks
Answer: C) Mechanical fasteners directly drilled through the glass
Rationale: Drilling or screwing through glass compromises integrity. Glazing systems rely on
gaskets, sealants, and mechanical pressure plates to secure glass safely.
5.
Which OSHA regulation is most relevant to a glazing contractor performing high-rise window
installation?
A) OSHA 1926.501 – Fall Protection
B) OSHA 1910.146 – Confined Spaces
C) OSHA 1910.120 – Hazardous Waste Operations
D) OSHA 1926.302 – Cranes
Florida Glass and Glazing Contractor EXAM
ACTUAL EXAM COMPLETE 200 QUESTIONS
AND VERIFIED SOLUTIONS LATEST UPDATE
THIS YEAR
Florida Glass and Glazing Contractor ExaM– Exam Coverage Overview
The Florida Glass and Glazing Contractor Exam assesses knowledge, skills, and practical
understanding required to perform as a licensed contractor in the state of Florida. The exam
covers the following areas:
Scope of Work & Contractor Responsibilities – Understanding the role of a glazing contractor,
legal responsibilities, and project management.
Glass Types and Materials – Knowledge of tempered, laminated, insulated, and specialty glass,
including specifications, codes, and applications.
Installation Techniques & Procedures – Proper handling, cutting, fitting, and securing glass;
sealants, gaskets, and framing systems.
Building Codes, Standards, and Regulations – Florida Building Code, ASTM standards, OSHA
safety requirements, and local permit processes.
Safety and Risk Management – On-site safety practices, protective equipment, hazard
identification, and risk mitigation.
Structural Glazing and Curtain Walls – Design, load considerations, anchoring, and
performance requirements.
Energy Efficiency & Environmental Considerations – Insulated glass units, Low-E coatings, solar
control, and sustainability practices.
Business and Project Management – Contracts, estimating, subcontractor management, and
client communication.
Troubleshooting and Maintenance – Repair, replacement, and inspection of glazing systems.
Batch 1: Florida Glass and Glazing Contractor Exam 2026 – Questions 1-50
,Page 2 of 116
1.
A homeowner requests the installation of a large, floor-to-ceiling window in a coastal area with
frequent hurricanes. Which glass system should a licensed glazing contractor recommend to
maximize both impact resistance and compliance with Florida building codes?
A) Single-pane clear glass
B) Laminated glass with a polyvinyl butyral (PVB) interlayer
C) Tinted tempered glass
D) Frosted annealed glass
Answer: B) Laminated glass with a polyvinyl butyral (PVB) interlayer
Rationale: Laminated glass, consisting of two layers of glass bonded with a PVB interlayer,
provides superior impact resistance and prevents shattering. It is required in hurricane-prone
areas under the Florida Building Code.
2.
During a commercial storefront installation, a contractor notices slight warping in the aluminum
frame. What is the most appropriate corrective action to ensure proper glazing installation
without compromising safety or warranties?
A) Force the glass into the warped frame using silicone sealant
B) Replace or adjust the frame to achieve proper alignment before glazing
,Page 3 of 116
C) Bend the glass to match the frame
D) Apply extra caulking to fill gaps
Answer: B) Replace or adjust the frame to achieve proper alignment before glazing
Rationale: Installing glass in a warped frame can cause stress, breakage, and void manufacturer
warranties. Proper alignment is critical for structural and aesthetic integrity.
3.
A client wants a window system that reduces heat gain and improves energy efficiency while
maintaining clear visibility. Which type of glazing system should a contractor recommend?
A) Single-pane clear glass
B) Insulated glass unit (IGU) with Low-E coating
C) Laminated safety glass
D) Frosted glass
Answer: B) Insulated glass unit (IGU) with Low-E coating
Rationale: IGUs with Low-E coatings minimize solar heat gain while allowing visible light,
improving energy efficiency and indoor comfort, in compliance with Florida energy codes.
4.
, Page 4 of 116
Which of the following is not an acceptable method for securing glass in an exterior storefront
system to prevent air and water infiltration?
A) Use of silicone sealant around perimeter
B) Rubber gaskets or EPDM glazing channels
C) Mechanical fasteners directly drilled through the glass
D) Pressure plate systems with setting blocks
Answer: C) Mechanical fasteners directly drilled through the glass
Rationale: Drilling or screwing through glass compromises integrity. Glazing systems rely on
gaskets, sealants, and mechanical pressure plates to secure glass safely.
5.
Which OSHA regulation is most relevant to a glazing contractor performing high-rise window
installation?
A) OSHA 1926.501 – Fall Protection
B) OSHA 1910.146 – Confined Spaces
C) OSHA 1910.120 – Hazardous Waste Operations
D) OSHA 1926.302 – Cranes
