PRO TOOLS 210 PREPARATION TEST 2026
QUESTIONS AND CORRECT ANSWERS
GRADED A+
● you can add a meter change by holding _____ while clicking in the
meter ruler. Answer: control
● the _____ must be enabled in order for Identify Beat to work. Answer:
conductor button
● MIDI beat clock is a sync signal (based on a session tempo) that
occurs at ____ pulses per quarter note. Answer: 24
● T or F - when routing the audio from an instrument track to an audio
track for recording, any plugins following the virtual instrument plugin
on the instrument track will be recorded as part of the audio file on the
new track. Answer: true
● to share session parameters such as mix/edit groups, existing tracks
(with or without their audio, clips, and automation data,) markers and
memory locations, window configurations, etc with other pro tools
sessions, you would use the ____ window. Answer: import session data
, ● three ways to activate dynamic transport mode are. Answer:
option>dynamic transport, control+command+P, right click play button
on transport window
● while in dynamic transport mode, the _____ is where playback begins.
this point can be moved during playback. Answer: play star marker (lil
blue triangle)
● when activating dynamic transport mode, pro tools will automatically
disable____ and enable ____. Answer: link timeline and edit selection,
loop playback mode
● quickpunch and track punch each allow ____ running punches per
pass. Answer: 200
● when using quick punch, ____ in the transport window is not
available. Answer: loop playback
● ____ mode allows you to punch in and out on different track
independently. Answer: trackpunch
● when using auto input mode, you will hear_____ on record enabled
tracks during recording and while transport is stopped. however, during
playback you will hear_____. Answer: live inputs, previously recorded
material
QUESTIONS AND CORRECT ANSWERS
GRADED A+
● you can add a meter change by holding _____ while clicking in the
meter ruler. Answer: control
● the _____ must be enabled in order for Identify Beat to work. Answer:
conductor button
● MIDI beat clock is a sync signal (based on a session tempo) that
occurs at ____ pulses per quarter note. Answer: 24
● T or F - when routing the audio from an instrument track to an audio
track for recording, any plugins following the virtual instrument plugin
on the instrument track will be recorded as part of the audio file on the
new track. Answer: true
● to share session parameters such as mix/edit groups, existing tracks
(with or without their audio, clips, and automation data,) markers and
memory locations, window configurations, etc with other pro tools
sessions, you would use the ____ window. Answer: import session data
, ● three ways to activate dynamic transport mode are. Answer:
option>dynamic transport, control+command+P, right click play button
on transport window
● while in dynamic transport mode, the _____ is where playback begins.
this point can be moved during playback. Answer: play star marker (lil
blue triangle)
● when activating dynamic transport mode, pro tools will automatically
disable____ and enable ____. Answer: link timeline and edit selection,
loop playback mode
● quickpunch and track punch each allow ____ running punches per
pass. Answer: 200
● when using quick punch, ____ in the transport window is not
available. Answer: loop playback
● ____ mode allows you to punch in and out on different track
independently. Answer: trackpunch
● when using auto input mode, you will hear_____ on record enabled
tracks during recording and while transport is stopped. however, during
playback you will hear_____. Answer: live inputs, previously recorded
material
