Virginia State Inspection Test #2 2026 – 95 Questions and Answers on Windshield Inspection, Mirrors, Fuel Systems and Motorcycle Safety

This document contains 95 exam-style questions with correct answers designed to help candidates prepare for the Virginia State Motor Vehicle Safety Inspection Certification Examination. The material focuses on inspection standards related to vehicle glass, mirrors, fuel systems, braking systems, and motorcycle safety requirements used by certified inspectors in Virginia. The study guide explains detailed windshield inspection standards, including conditions that require rejection of a vehicle. For example, a vehicle must be rejected if windshield cloudiness extends more than three inches above the bottom of the windshield, or if cracks, chips, or star fractures exceed specified limits that could obstruct the driver's visibility. The document also outlines restrictions for scratches within the windshield wiper sweep area and damage that allows movement of glass sections relative to each other. Another section explains vehicle body modification limits, including restrictions on hood scoops. Vehicles manufactured in 1990 or earlier cannot have hood scoops exceeding 2¼ inches in height, while vehicles produced after 1991 are limited to 1⅛ inches, measured from the junction of the dashboard and windshield. The material also covers sunshading and windshield tint regulations, explaining that decals, lettering, and sunshading materials may not extend below the AS-1 line on the windshield unless specifically authorized by the Virginia Department of Motor Vehicles (VDMV). If the AS-1 line is absent, the shading may extend no more than three inches downward from the top of the windshield. Additional sections review window and mirror inspection requirements, including rejection criteria for clouded or cracked side windows that impair driver visibility. Vehicles must have at least one properly mounted mirror that provides a rear view of at least 200 feet, and vehicles equipped with only one outside mirror must have that mirror mounted on the driver’s side. The study guide also explains fuel system inspection requirements, identifying conditions that require rejection of a vehicle such as fuel leaks, missing fuel caps, unsecured fuel system components, or fuel lines that contact the exhaust system. Inspectors must also verify that crossover lines are properly protected and securely mounted. The document includes a section dedicated to motorcycle inspection procedures, outlining requirements for brake systems, suspension components, lighting systems, and mirrors. Motorcycles must be equipped with at least one functioning headlamp, and the headlamp beam must be properly aligned within a four-inch tolerance when checked using an optical headlight aiming device. Additional motorcycle inspection requirements include: Functional brakes with at least one-third reserve lever travel Secure mirrors that allow a 200-foot rearward view Properly functioning suspension components including springs and shock absorbers Inspection of both front and rear brake systems when equipped The study material also includes inspection procedures for vehicles weighing more than 10,000 pounds, including air brake system inspection and steering lash measurements. For example, inspectors must reject vehicles if service brake pedal travel leaves less than one-fifth reserve travel, or if audible air leaks are present in brake chambers. Other important inspection topics covered in the document include: Trailer ventilation requirements for cooking or heating appliances Rear window visibility standards requiring a 200-foot rear view Steering lash limits based on steering wheel diameter Brake chamber air leak inspection procedures Air compressor inspection requirements for heavy vehicles This resource is particularly useful for individuals preparing for: Virginia State Safety Inspection Certification Exam Virginia Motor Vehicle Inspector licensing tests Automotive technician certification programs Vehicle safety compliance training courses It may also be relevant for students and professionals enrolled in programs such as: Automotive Technology programs Automotive Service Technician training Motor Vehicle Inspection certification courses Automotive repair and maintenance programs Transportation safety and vehicle compliance training The procedures and inspection standards reviewed in this document correspond closely with the official Virginia Motor Vehicle Safety Inspection Manual, which is the primary regulatory reference used by licensed inspectors in Virginia. Because the questions are presented in clear exam format with correct answers, this document serves as an effective study tool for candidates preparing to obtain or renew their Virginia State Vehicle Safety Inspector certification. Keywords virginia state inspection test questions answers virginia vehicle inspection certification exam study guide windshield inspection rejection criteria virginia vehicle glass damage inspection rules hood scoop height restrictions inspection vehicle mirror inspection requirements 200 feet visibility fuel system inspection failure criteria motorcycle inspection rules headlamp mirror brakes heavy vehicle air brake inspection standards steering lash measurement vehicle inspection vehicle windshield tint sunshade regulations motorcycle suspension inspection procedures virginia safety inspection manual study material automotive safety inspector exam preparation