Page 1 of 106
Florida Swimming Pool Contractor Exam ACTUAL Exam
ALL 200 QUESTIONS AND CORRECT ANSWERS LATEST
UPDATE THIS YEAR
Florida Swimming Pool Contractor Exam Overview
The Florida Swimming Pool Contractor license (Residential or Commercial) requires a deep
understanding of the Florida Building Code (FBC), specifically the 7th or 8th Edition (Building
and Residential), as well as safety standards like ANSI/APSP.
Exam Content Areas
• Pre-Installation and Site Preparation: Surveys, excavation, soil stability, and setback
requirements.
• Structural Design: Steel reinforcement (rebar), shotcrete/gunite application, and
formwork.
• Hydraulic Systems: Pipe sizing, pump affinity laws, filtration types, and TDH (Total
Dynamic Head) calculations.
• Water Chemistry and Treatment: Sanitation, pH balance, LSI (Langelier Saturation
Index), and salt-chlorine generation.
• Electrical and Bonding: Equipotential bonding, GFCI protection, and underwater
lighting.
• Safety and Regulatory Compliance: Florida Residential Building Code Chapter 45, the
Preston de Ibern/McKenzie Merriam Residential Swimming Pool Safety Act, and federal
VGBA (Virginia Graeme Baker) requirements.
• Maintenance and Repair: Leak detection, resurfacing, and deck finishes.
BATCH 1: Florida Regulations and Structural Integrity
Questions 1–100
1
, Page 2 of 106
1. What is the minimum depth required for a residential swimming pool to allow safe diving
from a pool deck?
A. 6 feet
B. 8 feet
C. 10 feet
D. 12 feet
Correct Answer: B
Rationale: Per ANSI/APSP standards adopted by Florida, residential pools intended for diving
from the deck must have a minimum depth of 8 feet to provide a safe "envelope" and prevent
spinal injuries.
2. Which material is commonly used for pool plumbing to resist corrosion and chemical
degradation?
A. Copper
B. Galvanized Steel
C. CPVC (Chlorinated Polyvinyl Chloride)
D. Lead pipe
Correct Answer: C
2
, Page 3 of 106
Rationale: CPVC is highly resistant to heat and the corrosive nature of high chlorine levels,
unlike standard PVC which can soften at very high temperatures near heaters.
3. What is the primary purpose of a pool skimmer?
A. To heat the water
B. To remove debris from the water surface
C. To inject chlorine
D. To provide structural support
Correct Answer: B
Rationale: The skimmer is the first point of the suction side of the hydraulic system, designed
to pull floating debris into a basket before it sinks or reaches the pump.
4. According to the Florida Residential Building Code, what is the minimum required height
for a safety barrier (fence) surrounding a pool?
A. 36 inches
B. 42 inches
C. 48 inches
D. 60 inches
Correct Answer: C
3
, Page 4 of 106
Rationale: The Florida Building Code (Residential) requires a minimum barrier height of 48
inches (4 feet) measured from the outside of the barrier.
5. What is the "Langelier Saturation Index" (LSI) used to determine?
A. The speed of the pump
B. Whether water is scale-forming or corrosive
C. The depth of the deep end
D. The amount of debris in the skimmer
Correct Answer: B
Rationale: LSI is a mathematical formula (factoring pH, temperature, calcium hardness, and
alkalinity) that tells a contractor if the water is balanced. A negative index suggests corrosive
water; a positive index suggests scaling water.
6. Which type of reinforcement is most commonly used in a "Gunite" pool shell?
A. Bamboo rods
B. Steel rebar
C. Plastic mesh
D. Tension cables
Correct Answer: B
4
Florida Swimming Pool Contractor Exam ACTUAL Exam
ALL 200 QUESTIONS AND CORRECT ANSWERS LATEST
UPDATE THIS YEAR
Florida Swimming Pool Contractor Exam Overview
The Florida Swimming Pool Contractor license (Residential or Commercial) requires a deep
understanding of the Florida Building Code (FBC), specifically the 7th or 8th Edition (Building
and Residential), as well as safety standards like ANSI/APSP.
Exam Content Areas
• Pre-Installation and Site Preparation: Surveys, excavation, soil stability, and setback
requirements.
• Structural Design: Steel reinforcement (rebar), shotcrete/gunite application, and
formwork.
• Hydraulic Systems: Pipe sizing, pump affinity laws, filtration types, and TDH (Total
Dynamic Head) calculations.
• Water Chemistry and Treatment: Sanitation, pH balance, LSI (Langelier Saturation
Index), and salt-chlorine generation.
• Electrical and Bonding: Equipotential bonding, GFCI protection, and underwater
lighting.
• Safety and Regulatory Compliance: Florida Residential Building Code Chapter 45, the
Preston de Ibern/McKenzie Merriam Residential Swimming Pool Safety Act, and federal
VGBA (Virginia Graeme Baker) requirements.
• Maintenance and Repair: Leak detection, resurfacing, and deck finishes.
BATCH 1: Florida Regulations and Structural Integrity
Questions 1–100
1
, Page 2 of 106
1. What is the minimum depth required for a residential swimming pool to allow safe diving
from a pool deck?
A. 6 feet
B. 8 feet
C. 10 feet
D. 12 feet
Correct Answer: B
Rationale: Per ANSI/APSP standards adopted by Florida, residential pools intended for diving
from the deck must have a minimum depth of 8 feet to provide a safe "envelope" and prevent
spinal injuries.
2. Which material is commonly used for pool plumbing to resist corrosion and chemical
degradation?
A. Copper
B. Galvanized Steel
C. CPVC (Chlorinated Polyvinyl Chloride)
D. Lead pipe
Correct Answer: C
2
, Page 3 of 106
Rationale: CPVC is highly resistant to heat and the corrosive nature of high chlorine levels,
unlike standard PVC which can soften at very high temperatures near heaters.
3. What is the primary purpose of a pool skimmer?
A. To heat the water
B. To remove debris from the water surface
C. To inject chlorine
D. To provide structural support
Correct Answer: B
Rationale: The skimmer is the first point of the suction side of the hydraulic system, designed
to pull floating debris into a basket before it sinks or reaches the pump.
4. According to the Florida Residential Building Code, what is the minimum required height
for a safety barrier (fence) surrounding a pool?
A. 36 inches
B. 42 inches
C. 48 inches
D. 60 inches
Correct Answer: C
3
, Page 4 of 106
Rationale: The Florida Building Code (Residential) requires a minimum barrier height of 48
inches (4 feet) measured from the outside of the barrier.
5. What is the "Langelier Saturation Index" (LSI) used to determine?
A. The speed of the pump
B. Whether water is scale-forming or corrosive
C. The depth of the deep end
D. The amount of debris in the skimmer
Correct Answer: B
Rationale: LSI is a mathematical formula (factoring pH, temperature, calcium hardness, and
alkalinity) that tells a contractor if the water is balanced. A negative index suggests corrosive
water; a positive index suggests scaling water.
6. Which type of reinforcement is most commonly used in a "Gunite" pool shell?
A. Bamboo rods
B. Steel rebar
C. Plastic mesh
D. Tension cables
Correct Answer: B
4
